[PATCH v3 07/13] drm/mediatek: add YUYV/UYVY color format support for RDMA

[ck.hu@mediatek.com (CK Hu)]

Hi, Stu:

On Mon, 2018-08-06 at 19:58 +0800, Stu Hsieh wrote:
> This patch add YUYV/UYVY color format support for RDMA
> and transform matrix for YUYV/UYVY.
> 
> Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> index ba72d392dc27..91a8b6e27d39 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> @@ -33,6 +33,8 @@
>  #define RDMA_ENGINE_EN					BIT(0)
>  #define RDMA_MODE_MEMORY				BIT(1)
>  #define DISP_REG_RDMA_SIZE_CON_0		0x0014
> +#define RDMA_MATRIX_ENABLE				BIT(17)
> +#define RDMA_MATRIX_INT_MTX_SEL				(7UL << 20)
>  #define DISP_REG_RDMA_SIZE_CON_1		0x0018
>  #define DISP_REG_RDMA_TARGET_LINE		0x001c
>  #define DISP_RDMA_MEM_CON			0x0024
> @@ -46,12 +48,15 @@
>  #define RDMA_FIFO_SIZE(rdma)			((rdma)->data->fifo_size)
>  #define DISP_RDMA_MEM_START_ADDR		0x0f00
>  
> +#define MATRIX_INT_MTX_SEL_DEFAULT		0xb00000
>  #define RDMA_MEM_GMC				0x40402020
>  
>  #define MEM_MODE_INPUT_FORMAT_RGB565		0x0
>  #define MEM_MODE_INPUT_FORMAT_RGB888		(0x001 << 4)
>  #define MEM_MODE_INPUT_FORMAT_RGBA8888		(0x002 << 4)
>  #define MEM_MODE_INPUT_FORMAT_ARGB8888		(0x003 << 4)
> +#define MEM_MODE_INPUT_FORMAT_UYVY		(0x004 << 4)
> +#define MEM_MODE_INPUT_FORMAT_YUYV		(0x005 << 4)
>  
>  struct mtk_disp_rdma_data {
>  	unsigned int fifo_size;
> @@ -176,6 +181,10 @@ static unsigned int rdma_fmt_convert(struct mtk_disp_rdma *rdma,
>  	case DRM_FORMAT_XBGR8888:
>  	case DRM_FORMAT_ABGR8888:
>  		return MEM_MODE_INPUT_FORMAT_RGBA8888 | MEM_MODE_INPUT_SWAP;
> +	case DRM_FORMAT_UYVY:
> +		return MEM_MODE_INPUT_FORMAT_UYVY;
> +	case DRM_FORMAT_YUYV:
> +		return MEM_MODE_INPUT_FORMAT_YUYV;
>  	}
>  }
>  
> @@ -191,6 +200,12 @@ static void mtk_rdma_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
>  
>  	con = rdma_fmt_convert(rdma, fmt);
>  	writel_relaxed(con, comp->regs + DISP_RDMA_MEM_CON);
> +	if (fmt == DRM_FORMAT_UYVY || fmt == DRM_FORMAT_YUYV)
> +		rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_0, 0xff0000,

Symbolize 0xff0000. Maybe you should define as

#define RDMA_MATRIX_INT_MTX_SEL GENMASK(23, 20)
#define RDMA_MATRIX_INT_MTX_YUV_TO_RGB   0x7
#define RDMA_MATRIX_INT_MTX_RGB_TO_RGB   0xb

Correct the naming to align data sheet.

Regards,
CK

> +				 RDMA_MATRIX_ENABLE | RDMA_MATRIX_INT_MTX_SEL);
> +	else
> +		rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_0, 0xff0000,
> +				 MATRIX_INT_MTX_SEL_DEFAULT);
>  
>  	writel_relaxed(addr, comp->regs + DISP_RDMA_MEM_START_ADDR);
>  	writel_relaxed(pitch, comp->regs + DISP_RDMA_MEM_SRC_PITCH);