From: ck.hu@mediatek.com (CK Hu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 08/13] drm/mediatek: register hdmi codec more earlier
Date: Thu, 6 Sep 2018 13:36:22 +0800 [thread overview]
Message-ID: <1536212182.4618.36.camel@mtksdaap41> (raw)
In-Reply-To: <20180905083146.14727-9-bibby.hsieh@mediatek.com>
Hi, Bibby:
On Wed, 2018-09-05 at 16:31 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
>
> sometimes hdmi reprobe due to encoder probe late,
> but audio dai probe earlier than hdmi. it would make
> audio dai cannot find the hdmi codec. we need to
> register hdmi codec earlier, and the base name which
> used in the register should be PLATFORM_DEVID_NONE,
> otherwise some audio dai dirver could not match it.
>
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_hdmi.c | 16 +++++++---------
> 1 file changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> index 7c022f3f53ec..2cb33098ec1a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> @@ -1669,15 +1669,14 @@ static void mtk_hdmi_register_audio_driver(struct device *dev)
> .max_i2s_channels = 2,
> .i2s = 1,
> };
> - struct platform_device *pdev;
> + static struct platform_device *pdev;
>
> - pdev = platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
> - PLATFORM_DEVID_AUTO, &codec_data,
> - sizeof(codec_data));
> - if (IS_ERR(pdev))
> + if (!pdev) {
> + pdev = platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
> + PLATFORM_DEVID_NONE,
> + &codec_data,
> + sizeof(codec_data));
> + DRM_INFO("%s driver bound to HDMI\n", HDMI_CODEC_DRV_NAME);
> + }
In the original code, it only register device but not unregister device.
This looks like a bug in hdmi driver. So we need to register and
unregister. You define a 'static' variable here would make
register/unregister asymmetric. And how do you make sure that hdmi
driver is probed before audio dai driver? By the device tree order?
Device tree older may vary for each SoC. I would like more general
solution to make sure that hdmi driver is probed before audio dai
driver. There are some method to make drivers probe in order, so try to
use the better method.
Regards,
CK
> return;
> -
> - DRM_INFO("%s driver bound to HDMI\n", HDMI_CODEC_DRV_NAME);
> }
>
> static int mtk_drm_hdmi_probe(struct platform_device *pdev)
> @@ -1691,6 +1690,7 @@ static int mtk_drm_hdmi_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> hdmi->dev = dev;
> + mtk_hdmi_register_audio_driver(dev);
>
> ret = mtk_hdmi_dt_parse_pdata(hdmi, pdev);
> if (ret)
> @@ -1704,8 +1704,6 @@ static int mtk_drm_hdmi_probe(struct platform_device *pdev)
> return ret;
> }
>
> - mtk_hdmi_register_audio_driver(dev);
> -
> hdmi->bridge.funcs = &mtk_hdmi_bridge_funcs;
> hdmi->bridge.of_node = pdev->dev.of_node;
> drm_bridge_add(&hdmi->bridge);
next prev parent reply other threads:[~2018-09-06 5:36 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-05 8:31 [PATCH v2 00/13] drm/mediatek: support hdmi output for mt2701 and mt7623 Bibby Hsieh
2018-09-05 8:31 ` [PATCH v2 01/13] drm/mediatek: add refcount for DPI power on/off Bibby Hsieh
2018-09-05 9:30 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 02/13] drm/mediatek: move hardware register to node data Bibby Hsieh
2018-09-05 9:50 ` CK Hu
2018-09-05 10:32 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 03/13] drm/mediatek: adjust EDGE to match clock and data Bibby Hsieh
2018-09-05 10:47 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 04/13] drm/mediatek: add clock factor for different IC Bibby Hsieh
2018-09-06 2:11 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 05/13] drm/mediatek: dpi use new API for finding bridge Bibby Hsieh
2018-09-06 1:49 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 06/13] drm/mediatek: add dpi driver for mt2701 and mt7623 Bibby Hsieh
2018-09-06 2:18 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 07/13] drm/mediatek: separae hdmi phy to different file Bibby Hsieh
2018-09-07 1:15 ` CK Hu
2018-09-10 1:44 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 08/13] drm/mediatek: register hdmi codec more earlier Bibby Hsieh
2018-09-06 5:36 ` CK Hu [this message]
2018-09-05 8:31 ` [PATCH v2 09/13] drm/mediatek: add support for SPDIF audio in HDMI Bibby Hsieh
2018-09-06 3:37 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 10/13] drm/mediatek: add hdmi driver for MT2701 and MT7623 Bibby Hsieh
2018-09-07 2:28 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 11/13] drm/mediatek: implement connection from BLS to DPI0 Bibby Hsieh
2018-09-06 5:42 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 12/13] drm/mediatek: add a error return value when clock driver has been prepared Bibby Hsieh
2018-09-05 8:31 ` [PATCH v2 13/13] drm/mediatek: config component output by device node port Bibby Hsieh
2018-09-06 6:03 ` CK Hu
2018-09-21 3:02 ` Bibby Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536212182.4618.36.camel@mtksdaap41 \
--to=ck.hu@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox