From: ck.hu@mediatek.com (CK Hu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 13/13] drm/mediatek: config component output by device node port
Date: Thu, 6 Sep 2018 14:03:22 +0800 [thread overview]
Message-ID: <1536213802.4618.41.camel@mtksdaap41> (raw)
In-Reply-To: <20180905083146.14727-14-bibby.hsieh@mediatek.com>
Hi, Bibby:
On Wed, 2018-09-05 at 16:31 +0800, Bibby Hsieh wrote:
> We can select output component by decive node port.
> Main path default output component is DSI.
> External path default output component is DPI.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 37 ++++++++++++++++++++++++++++++----
> drivers/gpu/drm/mediatek/mtk_drm_drv.h | 4 ++--
> 2 files changed, 35 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index d961112fa2f5..a477fb878c06 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -21,7 +21,9 @@
> #include <drm/drm_of.h>
> #include <linux/component.h>
> #include <linux/iommu.h>
> +#include <linux/of.h>
> #include <linux/of_address.h>
> +#include <linux/of_graph.h>
> #include <linux/of_platform.h>
> #include <linux/pm_runtime.h>
>
> @@ -133,7 +135,7 @@ static const struct drm_mode_config_funcs mtk_drm_mode_config_funcs = {
> .atomic_commit = mtk_atomic_commit,
> };
>
> -static const enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
> +static enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
> DDP_COMPONENT_OVL0,
> DDP_COMPONENT_RDMA0,
> DDP_COMPONENT_COLOR0,
> @@ -141,7 +143,7 @@ static const enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
> DDP_COMPONENT_DSI0,
> };
>
> -static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
> +static enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
> DDP_COMPONENT_RDMA1,
> DDP_COMPONENT_DPI0,
> };
> @@ -172,7 +174,7 @@ static const enum mtk_ddp_comp_id mt2712_mtk_ddp_third[] = {
> DDP_COMPONENT_PWM2,
> };
>
> -static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
> +static enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
> DDP_COMPONENT_OVL0,
> DDP_COMPONENT_COLOR0,
> DDP_COMPONENT_AAL0,
> @@ -183,7 +185,7 @@ static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
> DDP_COMPONENT_PWM0,
> };
>
> -static const enum mtk_ddp_comp_id mt8173_mtk_ddp_ext[] = {
> +static enum mtk_ddp_comp_id mt8173_mtk_ddp_ext[] = {
> DDP_COMPONENT_OVL1,
> DDP_COMPONENT_COLOR1,
> DDP_COMPONENT_GAMMA,
> @@ -472,6 +474,7 @@ static int mtk_drm_probe(struct platform_device *pdev)
>
> /* Iterate over sibling DISP function blocks */
> for_each_child_of_node(dev->of_node->parent, node) {
> + struct device_node *port, *ep, *remote;
> const struct of_device_id *of_id;
> enum mtk_ddp_comp_type comp_type;
> int comp_id;
> @@ -531,6 +534,32 @@ static int mtk_drm_probe(struct platform_device *pdev)
>
> private->ddp_comp[comp_id] = comp;
> }
> +
> + if (comp_type != MTK_DSI && comp_type != MTK_DPI) {
> + port = of_graph_get_port_by_id(node, 0);
> + if (!port)
> + continue;
> + ep = of_get_child_by_name(port, "endpoint");
> + of_node_put(port);
> + if (!ep)
> + continue;
> + remote = of_graph_get_remote_port_parent(ep);
> + of_node_put(ep);
> + if (!remote)
> + continue;
> + of_id = of_match_node(mtk_ddp_comp_dt_ids, remote);
> + if (!of_id)
> + continue;
> + comp_type = (enum mtk_ddp_comp_type)of_id->data;
> + for (i = 0; i < private->data->main_len - 1; i++)
> + if (private->data->main_path[i] == comp_id)
> + private->data->main_path[i + 1] =
> + mtk_ddp_comp_get_id(node, comp_type);
> + for (i = 0; i < private->data->ext_len - 1; i++)
> + if (private->data->ext_path[i] == comp_id)
> + private->data->ext_path[i + 1] =
> + mtk_ddp_comp_get_id(node, comp_type);
> + }
I think you should add description in binding document
(Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt)
for this. After the binding document is fully reviewed, we could start
to review this patch.
Regards,
CK
> }
>
> if (!private->mutex_node) {
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> index ecc00ca3221d..256a3ff2e66e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> @@ -29,9 +29,9 @@ struct drm_property;
> struct regmap;
>
> struct mtk_mmsys_driver_data {
> - const enum mtk_ddp_comp_id *main_path;
> + enum mtk_ddp_comp_id *main_path;
> unsigned int main_len;
> - const enum mtk_ddp_comp_id *ext_path;
> + enum mtk_ddp_comp_id *ext_path;
> unsigned int ext_len;
> const enum mtk_ddp_comp_id *third_path;
> unsigned int third_len;
next prev parent reply other threads:[~2018-09-06 6:03 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-05 8:31 [PATCH v2 00/13] drm/mediatek: support hdmi output for mt2701 and mt7623 Bibby Hsieh
2018-09-05 8:31 ` [PATCH v2 01/13] drm/mediatek: add refcount for DPI power on/off Bibby Hsieh
2018-09-05 9:30 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 02/13] drm/mediatek: move hardware register to node data Bibby Hsieh
2018-09-05 9:50 ` CK Hu
2018-09-05 10:32 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 03/13] drm/mediatek: adjust EDGE to match clock and data Bibby Hsieh
2018-09-05 10:47 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 04/13] drm/mediatek: add clock factor for different IC Bibby Hsieh
2018-09-06 2:11 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 05/13] drm/mediatek: dpi use new API for finding bridge Bibby Hsieh
2018-09-06 1:49 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 06/13] drm/mediatek: add dpi driver for mt2701 and mt7623 Bibby Hsieh
2018-09-06 2:18 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 07/13] drm/mediatek: separae hdmi phy to different file Bibby Hsieh
2018-09-07 1:15 ` CK Hu
2018-09-10 1:44 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 08/13] drm/mediatek: register hdmi codec more earlier Bibby Hsieh
2018-09-06 5:36 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 09/13] drm/mediatek: add support for SPDIF audio in HDMI Bibby Hsieh
2018-09-06 3:37 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 10/13] drm/mediatek: add hdmi driver for MT2701 and MT7623 Bibby Hsieh
2018-09-07 2:28 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 11/13] drm/mediatek: implement connection from BLS to DPI0 Bibby Hsieh
2018-09-06 5:42 ` CK Hu
2018-09-05 8:31 ` [PATCH v2 12/13] drm/mediatek: add a error return value when clock driver has been prepared Bibby Hsieh
2018-09-05 8:31 ` [PATCH v2 13/13] drm/mediatek: config component output by device node port Bibby Hsieh
2018-09-06 6:03 ` CK Hu [this message]
2018-09-21 3:02 ` Bibby Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536213802.4618.41.camel@mtksdaap41 \
--to=ck.hu@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).