[PATCH v2 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs

[heiko@sntech.de (Heiko Stübner)]

Am Mittwoch, 22. M?rz 2017, 18:23:56 CET schrieb Elaine Zhang:
> On 03/21/2017 04:55 PM, Heiko St?bner wrote:
> > Am Donnerstag, 16. M?rz 2017, 21:17:22 CET schrieb cl at rock-chips.com:
> >> +	cru: clock-controller at ff440000 {
> >> +		compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
> >> +		reg = <0x0 0xff440000 0x0 0x1000>;
> >> +		rockchip,grf = <&grf>;
> >> +		#clock-cells = <1>;
> >> +		#reset-cells = <1>;
> >> +		assigned-clocks =
> >> +			<&cru DCLK_LCDC>, <&cru SCLK_PDM>,
> >> +			<&cru SCLK_RTC32K>, <&cru SCLK_UART0>,
> >> +			<&cru SCLK_UART1>, <&cru SCLK_UART2>,
> >> +			<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
> >> +			<&cru ACLK_VIO_PRE>, <&cru ACLK_RGA_PRE>,
> >> +			<&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>,
> >> +			<&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>,
> >> +			<&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>,
> >> +			<&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>,
> >> +			<&cru SCLK_SDIO>, <&cru SCLK_TSP>,
> >> +			<&cru SCLK_WIFI>, <&cru ARMCLK>,
> >> +			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
> >> +			<&cru ACLK_BUS_PRE>, <&cru HCLK_BUS_PRE>,
> >> +			<&cru PCLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
> >> +			<&cru HCLK_PERI>, <&cru PCLK_PERI>,
> >> +			<&cru ACLK_VIO_PRE>, <&cru HCLK_VIO_PRE>,
> >> +			<&cru ACLK_RGA_PRE>, <&cru SCLK_RGA>,
> >> +			<&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>,
> >> +			<&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>,
> >> +			<&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>,
> >> +			<&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>,
> >> +			<&cru SCLK_EFUSE>, <&cru PCLK_DDR>,
> >> +			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>,
> >> +			<&cru SCLK_RTC32K>, <&cru SCLK_USB3OTG_SUSPEND>;
> > 
> > that list is way to long.
> > Device-specific clocks should be inited in their respective device nodes.
> 
> Cpll init freq is 1200M, is too high. we need set cpll child clk div
> first,and then set cpll freq.
> After pll init, others clk init freq can inited in their device node.

thanks, that is a nice explanation. Please put it into a comment above the 
assigned-clocks property, so that we can keep that knowledge around for later 
times :-) .


Thanks
Heiko