From: jianxin.pan@amlogic.com (Jianxin Pan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/2] mtd: rawnand: meson: add Amlogic NAND driver support
Date: Thu, 20 Sep 2018 16:50:47 +0800 [thread overview]
Message-ID: <1537433449-65213-1-git-send-email-jianxin.pan@amlogic.com> (raw)
These two patches try to add initial NAND driver support for Amlogic Meson
SoCs, current it has been tested on GXL(p212) and AXG(s400) platform.
Changes since v3 at [4]:
- remove partition table and some used props from dt-bindings
Changes since v2 at [3]:
- remove some hardcode time value, like twb
- use dev wait R/B instead of nand_soft_waitrdy
- implement nfc ecc init by ecc helper
- rework nfc buffer init to register the maximun buffer when several chips
- free nfc buffer when error and cleanup
- add variable to teack all the already assigned CS lines
- fix mtd->name use the first cs line only
- remove dt "nand-enable-scrambler" and use NAND_NEED_SCRAMBLING instead.
- move setuping ECC fileds after the identification phase
- use nand_scan() and attach_chip()
- check one event to return IRQ_NONE
- delete cast when of_device_get_match_data
- use nand_controller_init() helper
- remove nfc driver complains when calling devm_ioremap_resource
- clear irqs before setting up irq handler
Changes since v1 at [1]:
- adopt property amlogic,nand-enable-scrambler - thanks Martin
- drop nand pins in DT
- convert clk access to emmc clkc model
- fix regiser field definition alignment
- drop nand-user-mode
- parse cs id from DT
- rework n2m, m2n function
- explain why insert two "IDLE" command
- implement exec_op()
- drop meson_nfc_get_nand_chip_dts()
- release resource once error occur in meson_nfc_nand_chips_init(),
- call nand_cleanup(nand) once mtd_device_register fail
Items not addressed ( or confirmed ) in this version:
- convert to ECC conf helper()
- convert to dma coherent API
- how to construct mtd->name
[1] https://lkml.kernel.org/r/20180613161314.14894-1-yixun.lan at amlogic.com
[2] https://lkml.kernel.org/r/20180712211244.11428-1-yixun.lan at amlogic.com
[3] https://lkml.kernel.org/r/20180719094612.5833-1-yixun.lan at amlogic.com
[4] https://lkml.kernel.org/r/1536317831-58056-1-git-send-email-jianxin.pan at amlogic.com/
Liang Yang (2):
dt-bindings: nand: meson: add Amlogic NAND controller driver
mtd: rawnand: meson: add support for Amlogic NAND flash controller
.../devicetree/bindings/mtd/amlogic,meson-nand.txt | 60 +
drivers/mtd/nand/raw/Kconfig | 10 +
drivers/mtd/nand/raw/Makefile | 1 +
drivers/mtd/nand/raw/meson_nand.c | 1372 ++++++++++++++++++++
4 files changed, 1443 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
create mode 100644 drivers/mtd/nand/raw/meson_nand.c
--
1.9.1
next reply other threads:[~2018-09-20 8:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-20 8:50 Jianxin Pan [this message]
2018-09-20 8:50 ` [PATCH v4 1/2] dt-bindings: nand: meson: add Amlogic NAND controller driver Jianxin Pan
2018-09-27 18:16 ` Rob Herring
2018-09-28 8:33 ` Liang Yang
2018-09-20 8:50 ` [PATCH v4 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller Jianxin Pan
2018-09-22 15:32 ` Martin Blumenstingl
2018-09-27 8:16 ` Liang Yang
2018-09-27 9:12 ` Martin Blumenstingl
2018-09-28 8:31 ` Liang Yang
2018-10-29 9:47 ` Miquel Raynal
2018-10-29 11:09 ` Jianxin Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1537433449-65213-1-git-send-email-jianxin.pan@amlogic.com \
--to=jianxin.pan@amlogic.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).