From mboxrd@z Thu Jan 1 00:00:00 1970 From: leilk.liu@mediatek.com (lei liu) Date: Thu, 27 Sep 2018 09:12:12 +0800 Subject: [PATCH v3 1/3] spis: mediatek: add bindings for Mediatek MT2712 soc platform In-Reply-To: <20180926223318.GA18703@bogus> References: <1537150762-7072-1-git-send-email-leilk.liu@mediatek.com> <1537150762-7072-2-git-send-email-leilk.liu@mediatek.com> <20180926223318.GA18703@bogus> Message-ID: <1538010732.27607.25.camel@mhfsdcap03> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, 2018-09-26 at 17:33 -0500, Rob Herring wrote: > On Mon, Sep 17, 2018 at 10:19:20AM +0800, Leilk Liu wrote: > > This patch adds a DT binding documentation for the MT2712 soc. > > > > Signed-off-by: Leilk Liu > > --- > > .../devicetree/bindings/spi/spi-slave-mt27xx.txt | 32 ++++++++++++++++++++ > > 1 file changed, 32 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt > > > > diff --git a/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt b/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt > > new file mode 100644 > > index 0000000..09cb2c4 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt > > @@ -0,0 +1,32 @@ > > +Binding for MTK SPI Slave controller > > + > > +Required properties: > > +- compatible: should be one of the following. > > + - mediatek,mt2712-spi-slave: for mt2712 platforms > > +- reg: Address and length of the register set for the device. > > +- interrupts: Should contain spi interrupt. > > +- clocks: phandles to input clocks. > > + It's clock gate, and should be <&infracfg CLK_INFRA_AO_SPI1>. > > +- clock-names: should be "spi" for the clock gate. > > + > > +Optional properties: > > +- assigned-clocks: it's mux clock, should be <&topckgen CLK_TOP_SPISLV_SEL>. > > +- assigned-clock-parents: parent of mux clock. > > + It's PLL, and should be on of the following. > > s/on/one/ > > With that fixed, > > Reviewed-by: Rob Herring Yes, it's a mistake, I'll fix it, thanks