From: Dave.Martin@arm.com (Dave Martin)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 00/23] KVM: arm64: Initial support for SVE guests
Date: Fri, 28 Sep 2018 14:39:04 +0100 [thread overview]
Message-ID: <1538141967-15375-1-git-send-email-Dave.Martin@arm.com> (raw)
This series implements basic support for allowing KVM guests to use the
Arm Scalable Vector Extension (SVE).
The patches are based on v4.19-rc5.
The patches are also available on a branch for reviewer convenience. [1]
This is a significant overhaul of the previous preliminary series [2],
with the major changes outlined below, and additional minor updates in
response to review feedback (see the individual patches for those).
In the interest of getting this series out for review,
This series is **completely untested**.
Reviewers should focus on the proposed API (but any other comments are
of course welcome!)
Major changes:
* Reworked on top of the new KVM FPSIMD context switching model.
* Migrated away from use of feature bits in KVM_ARM_PREFERRED_TARGET /
KVM_VCPU_INIT to detect and enable SVE support.
Availability is now reported via KVM_CAP_ARM_SVE, and SVE support
is enabled and configured per-vcpu with a new ioctl
KVM_ARM_SVE_CONFIG.
* KVM_ARM_SVE_CONFIG also adds the ability to detect and configure
the set of SVE vector lengths provided to the guest.
* The ioctl register access model has been simplified. The new SVE
interface must now be used to access the content of the FPSIMD
V-registers, on SVE-enabled vcpus. The kernel no longer tries to
emulate the KVM_REG_ARM_CORE view for these registers in this case.
(For non-SVE-enabled vcpus, the KVM_REG_ARM_CORE interface works as
normal.)
* Draft documentation for the SVE extensions has been added to KVM's
api.txt.
Known issues:
* KVM_GET_REG_LIST enumerates the FPSIMD V-registers for SVE-enabled
vcpus. It shouldn't, because attempts to access these will now fail!
* kvmtool/qemu updates are needed to enable creation of SVE-enabled
guests (to be discussed separately).
* Due to heavy rework, the series is currently a bit of a mess: the
patches are not presented in a very coherent order, and one or two
patches may even now be redundant or irrelevant. If you spot any
obvious inconsistencies, please shout!
[1]
http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve-kvm/rfcv2
git://linux-arm.org/linux-dm.git sve-kvm/rfcv2
[2] [RFC PATCH 00/16] KVM: arm64: Initial support for SVE guests
http://lists.infradead.org/pipermail/linux-arm-kernel/2018-June/585467.html
Dave Martin (23):
arm64: fpsimd: Always set TIF_FOREIGN_FPSTATE on task state flush
KVM: arm64: Delete orphaned declaration for __fpsimd_enabled()
KVM: arm64: Refactor kvm_arm_num_regs() for easier maintenance
KVM: arm64: Add missing #include of <linux/bitmap.h> to kvm_host.h
KVM: arm: Add arch vcpu uninit hook
arm64/sve: Check SVE virtualisability
arm64/sve: Enable SVE state tracking for non-task contexts
KVM: arm64: Add a vcpu flag to control SVE visibility for the guest
KVM: arm64: Propagate vcpu into read_id_reg()
KVM: arm64: Extend reset_unknown() to handle mixed RES0/UNKNOWN
registers
KVM: arm64: Support runtime sysreg filtering for KVM_GET_REG_LIST
KVM: arm64/sve: System register context switch and access support
KVM: arm64/sve: Context switch the SVE registers
KVM: Allow 2048-bit register access via ioctl interface
KVM: arm64/sve: Add SVE support to register access ioctl interface
KVM: arm64: Enumerate SVE register indices for KVM_GET_REG_LIST
arm64/sve: In-kernel vector length availability query interface
KVM: arm64: Add arch vcpu ioctl hook
KVM: arm64/sve: Report and enable SVE API extensions for userspace
KVM: arm64: Add arch vm ioctl hook
KVM: arm64/sve: allow KVM_ARM_SVE_CONFIG_QUERY on vm fd
KVM: Documentation: Document arm64 core registers in detail
KVM: arm64/sve: Document KVM API extensions for SVE
Documentation/virtual/kvm/api.txt | 160 ++++++++++++++++
arch/arm/include/asm/kvm_host.h | 16 +-
arch/arm64/include/asm/fpsimd.h | 33 +++-
arch/arm64/include/asm/kvm_host.h | 25 ++-
arch/arm64/include/asm/kvm_hyp.h | 1 -
arch/arm64/include/asm/sysreg.h | 3 +
arch/arm64/include/uapi/asm/kvm.h | 24 +++
arch/arm64/kernel/cpufeature.c | 2 +-
arch/arm64/kernel/fpsimd.c | 163 +++++++++++-----
arch/arm64/kernel/signal.c | 5 -
arch/arm64/kvm/fpsimd.c | 16 +-
arch/arm64/kvm/guest.c | 391 ++++++++++++++++++++++++++++++++++++--
arch/arm64/kvm/hyp/switch.c | 69 +++++--
arch/arm64/kvm/reset.c | 50 +++++
arch/arm64/kvm/sys_regs.c | 144 ++++++++++++--
arch/arm64/kvm/sys_regs.h | 8 +-
include/uapi/linux/kvm.h | 5 +
virt/kvm/arm/arm.c | 9 +-
18 files changed, 1016 insertions(+), 108 deletions(-)
--
2.1.4
next reply other threads:[~2018-09-28 13:39 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-28 13:39 Dave Martin [this message]
2018-09-28 13:39 ` [RFC PATCH v2 01/23] arm64: fpsimd: Always set TIF_FOREIGN_FPSTATE on task state flush Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 02/23] KVM: arm64: Delete orphaned declaration for __fpsimd_enabled() Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 03/23] KVM: arm64: Refactor kvm_arm_num_regs() for easier maintenance Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 04/23] KVM: arm64: Add missing #include of <linux/bitmap.h> to kvm_host.h Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 05/23] KVM: arm: Add arch vcpu uninit hook Dave Martin
2018-11-02 8:05 ` Christoffer Dall
2018-11-15 16:40 ` Dave Martin
2018-11-20 10:56 ` Christoffer Dall
2018-09-28 13:39 ` [RFC PATCH v2 06/23] arm64/sve: Check SVE virtualisability Dave Martin
2018-11-15 15:39 ` Alex Bennée
2018-11-15 17:09 ` Dave Martin
2018-11-16 12:32 ` Alex Bennée
2018-11-16 15:09 ` Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 07/23] arm64/sve: Enable SVE state tracking for non-task contexts Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 08/23] KVM: arm64: Add a vcpu flag to control SVE visibility for the guest Dave Martin
2018-11-15 15:44 ` Alex Bennée
2018-09-28 13:39 ` [RFC PATCH v2 09/23] KVM: arm64: Propagate vcpu into read_id_reg() Dave Martin
2018-11-15 15:56 ` Alex Bennée
2018-09-28 13:39 ` [RFC PATCH v2 10/23] KVM: arm64: Extend reset_unknown() to handle mixed RES0/UNKNOWN registers Dave Martin
2018-11-02 8:11 ` Christoffer Dall
2018-11-15 17:11 ` Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 11/23] KVM: arm64: Support runtime sysreg filtering for KVM_GET_REG_LIST Dave Martin
2018-11-02 8:16 ` Christoffer Dall
2018-11-15 17:27 ` Dave Martin
2018-11-22 10:53 ` Christoffer Dall
2018-11-22 11:13 ` Peter Maydell
2018-11-22 12:34 ` Christoffer Dall
2018-11-22 12:59 ` Peter Maydell
2018-11-22 11:27 ` Alex Bennée
2018-11-22 12:32 ` Dave P Martin
2018-11-22 13:07 ` Christoffer Dall
2018-11-23 17:42 ` Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 12/23] KVM: arm64/sve: System register context switch and access support Dave Martin
2018-11-15 16:37 ` Alex Bennée
2018-11-15 17:59 ` Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 13/23] KVM: arm64/sve: Context switch the SVE registers Dave Martin
2018-11-19 16:36 ` Alex Bennée
2018-11-19 17:03 ` Dave Martin
2018-11-20 12:25 ` Alex Bennée
2018-11-20 14:17 ` Dave Martin
2018-11-20 15:30 ` Alex Bennée
2018-11-20 17:18 ` Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 14/23] KVM: Allow 2048-bit register access via ioctl interface Dave Martin
2018-11-19 16:48 ` Alex Bennée
2018-11-19 17:07 ` Dave Martin
2018-11-20 11:20 ` Alex Bennée
2018-09-28 13:39 ` [RFC PATCH v2 15/23] KVM: arm64/sve: Add SVE support to register access " Dave Martin
2018-11-21 15:20 ` Alex Bennée
2018-11-21 18:05 ` Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 16/23] KVM: arm64: Enumerate SVE register indices for KVM_GET_REG_LIST Dave Martin
2018-11-21 16:09 ` Alex Bennée
2018-11-21 16:32 ` Dave Martin
2018-11-21 16:49 ` Alex Bennée
2018-11-21 17:46 ` Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 17/23] arm64/sve: In-kernel vector length availability query interface Dave Martin
2018-11-21 16:16 ` Alex Bennée
2018-11-21 16:35 ` Dave Martin
2018-11-21 16:46 ` Alex Bennée
2018-09-28 13:39 ` [RFC PATCH v2 18/23] KVM: arm64: Add arch vcpu ioctl hook Dave Martin
2018-11-02 8:30 ` Christoffer Dall
2018-09-28 13:39 ` [RFC PATCH v2 19/23] KVM: arm64/sve: Report and enable SVE API extensions for userspace Dave Martin
2018-11-22 15:23 ` Alex Bennée
2018-12-05 18:22 ` Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 20/23] KVM: arm64: Add arch vm ioctl hook Dave Martin
2018-11-02 8:32 ` Christoffer Dall
2018-11-15 18:04 ` Dave Martin
2018-11-20 10:58 ` Christoffer Dall
2018-11-20 14:19 ` Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 21/23] KVM: arm64/sve: allow KVM_ARM_SVE_CONFIG_QUERY on vm fd Dave Martin
2018-11-22 15:29 ` Alex Bennée
2018-09-28 13:39 ` [RFC PATCH v2 22/23] KVM: Documentation: Document arm64 core registers in detail Dave Martin
2018-09-28 13:39 ` [RFC PATCH v2 23/23] KVM: arm64/sve: Document KVM API extensions for SVE Dave Martin
2018-11-22 15:31 ` Alex Bennée
2018-12-05 17:59 ` Dave Martin
2018-11-22 15:34 ` [RFC PATCH v2 00/23] KVM: arm64: Initial support for SVE guests Alex Bennée
2018-12-04 15:50 ` Dave Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1538141967-15375-1-git-send-email-Dave.Martin@arm.com \
--to=dave.martin@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).