From: dkos@cadence.com (Damian Kos)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/6] drm: add support for Cadence MHDP DPI/DP bridge.
Date: Mon, 8 Oct 2018 22:42:06 +0100 [thread overview]
Message-ID: <1539034953-11274-1-git-send-email-dkos@cadence.com> (raw)
Hello!
This is the series of patches that will add support for the Cadence's DPI/DP
bridge. Please note that this is a preliminary version of the driver and there
will be more patches in the future with updates, fixes and improvements.
Please keep that in mind when looking at FIXME/TODO/XXX comments.
Initially, MHDP driver was developed as a DRM bridge driver and was planed to
be placed in drivers/gpu/drm/bridge/mhdp.c. However, there was already
a driver for Cadence's DP controller developed by RockChip, but that driver
uses the different DRM framework and looks like a part of a bigger system.
Both controllers (including firmware) are quite different internally
(MST/FEC/DSC support, link training done by driver, additional commands, IRQ's
etc.) but they have similar register map, except for Framer/Streamer (which is
noticeably different), so they appear similar.
The following patches contain:
- Moving common code to drivers/gpu/drm/bridge/cdns-mhdp-common.* and
modifying it a bit (mostly new prefixes for functions and data types) so it
can be used by two, higher level, drivers.
- Modifying existing RockChip's DP driver to use the common code after changes
made to it (use the new cdns_mhdp_device structure and new function names).
- Modifying DRM helpers a bit. Some are required for new driver, some are
updates from DP 1.2 to 1.3 or 1.4.
- Adding documentation for device tree bindings.
- Adding preliminary Cadence DPI/DP bridge driver.
Some of the things that will be added later on include (but are not limited
to):
- DSC support
- FEC support
- HDCP support
Changes in v2:
- Added actual description of what the patch contains, what is it for and
what's going on here in general.
- New structure. Now we have one common low level driver + two high level
drivers - one for RockChip with minimum changes and one, more general, for
Cadence.
- Dropped some changes made to DRM helpers.
- Updated the device tree bindings document.
Changes in v3:
- Corrected dt-bindings document
- Enabled some clocks at startup (since FW doesn't do that anymore).
- Changed Firmware file name to match the file on Linux Firmware repo.
- Added SST audio support
- Made common functions (in cdns-mhdp-common.*) public.
Changes in v4:
- Fixed Kconfig in drm/rockchip
- Fixed Signed-offs
- dp_link_status() is no longer public since it's used only in drm_dp_helper.c
- Replaced EXTRA_CFLAGS with ccflags-y in drm/rockchip Makefile
Changes in v5:
- Fixed Kconfig in drm/rockchip again
- Moved cdn-dp-reg.h (cdns-mhdp-common.h) to include/drm/bridge instead of
drivers/gpu/drm/bridge/
- Updated the mhdp_validate_cr function
Changes in v6:
- Added Reviewed-bys for already reviewed patches
- Dropped patch v5-0003 (that made dp_get_lane_status helper public)
- Added patch with MST support
- Added patch with Cadence SD0801 PHY init
Damian Kos (2):
drm/rockchip: prepare common code for cdns and rk dpi/dp driver
drm/bridge: add PHY initialization in mhdp8546 driver.
Piotr Sroka (1):
drm/bridge: add support for MST in mhdp8546 driver
Quentin Schulz (3):
drm/dp: fix link probing for devices supporting DP 1.4+
dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings
drm: bridge: add support for Cadence MHDP DPI/DP bridge
.../bindings/display/bridge/cdns,mhdp.txt | 43 +
drivers/gpu/drm/bridge/Kconfig | 9 +
drivers/gpu/drm/bridge/Makefile | 3 +
drivers/gpu/drm/bridge/cdns-mhdp-common.c | 1107 +++++++++++++
drivers/gpu/drm/bridge/cdns-mhdp-mst.c | 594 +++++++
drivers/gpu/drm/bridge/cdns-mhdp.c | 1371 +++++++++++++++++
drivers/gpu/drm/bridge/cdns-mhdp.h | 209 +++
drivers/gpu/drm/drm_dp_helper.c | 30 +-
drivers/gpu/drm/rockchip/Kconfig | 4 +-
drivers/gpu/drm/rockchip/Makefile | 2 +-
drivers/gpu/drm/rockchip/cdn-dp-core.c | 234 +--
drivers/gpu/drm/rockchip/cdn-dp-core.h | 43 +-
drivers/gpu/drm/rockchip/cdn-dp-reg.c | 969 ------------
include/drm/bridge/cdns-mhdp-cbs.h | 27 +
.../drm/bridge/cdns-mhdp-common.h | 174 ++-
15 files changed, 3669 insertions(+), 1150 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-common.c
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-mst.c
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.c
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.h
delete mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.c
create mode 100644 include/drm/bridge/cdns-mhdp-cbs.h
rename drivers/gpu/drm/rockchip/cdn-dp-reg.h => include/drm/bridge/cdns-mhdp-common.h (77%)
--
2.17.1
next reply other threads:[~2018-10-08 21:42 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-08 21:42 Damian Kos [this message]
2018-10-08 21:42 ` [PATCH v6 1/6] drm/rockchip: prepare common code for cdns and rk dpi/dp driver Damian Kos
2018-10-08 21:42 ` [PATCH v6 2/6] drm/dp: fix link probing for devices supporting DP 1.4+ Damian Kos
2018-10-08 21:42 ` [PATCH v6 3/6] dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings Damian Kos
2018-10-08 21:42 ` [PATCH v6 4/6] drm: bridge: add support for Cadence MHDP DPI/DP bridge Damian Kos
2018-11-05 13:10 ` Andrzej Hajda
2018-10-08 21:42 ` [PATCH v6 5/6] drm/bridge: add support for MST in mhdp8546 driver Damian Kos
2018-11-07 11:40 ` Andrzej Hajda
2018-11-08 14:53 ` Damian Kos
2018-10-08 21:42 ` [PATCH v6 6/6] drm/bridge: add PHY initialization " Damian Kos
2018-11-07 11:49 ` Andrzej Hajda
2018-11-05 9:44 ` [PATCH v6 0/6] drm: add support for Cadence MHDP DPI/DP bridge Damian Kos
2018-11-05 10:30 ` Laurent Pinchart
2018-11-05 10:33 ` Damian Kos
2018-11-05 11:09 ` Andrzej Hajda
2018-11-05 11:34 ` Damian Kos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539034953-11274-1-git-send-email-dkos@cadence.com \
--to=dkos@cadence.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).