From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: devicetree@vger.kernel.org, marc.zyngier@arm.com,
liviu.dudau@arm.com, robh+dt@kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: imx6ul: Correct mask for GIC PPI interrupts
Date: Mon, 3 Dec 2018 15:40:19 -0200 [thread overview]
Message-ID: <1543858820-3354-1-git-send-email-festevam@gmail.com> (raw)
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual
number of CPU cores the interrupt controller is wired to.
i.MX6UL contains a single Cortex-A7, hence the second interrupt specifier
cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)".
Tested on a imx6ul-evk.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Hi,
This is based on the following commit:
commit 2acb79e15119512da9b6a49906840e7678cfb618
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon May 7 15:19:52 2018 +0200
ARM: dts: r8a7790: Correct mask for GIC PPI interrupts
R-Car H2 (r8a7790) contains four Cortex-A15 and four Cortex-A7 cores,
hence the second interrupt specifier cell for Private Peripheral
Interrupts should use "GIC_CPU_MASK_SIMPLE(8)", to make sure interrupts
can be delivered to all 8 processor cores.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
and the confirmation from Liviu Dudau that GIC_CPU_MASK_SIMPLE()
should take the number of cores in the system as the argument:
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/315298.html
arch/arm/boot/dts/imx6ul.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 99c3663..0efc85f 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -94,7 +94,7 @@
intc: interrupt-controller@a01000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
interrupt-controller;
interrupt-parent = <&intc>;
@@ -106,10 +106,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&intc>;
status = "disabled";
};
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2018-12-03 17:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-03 17:40 Fabio Estevam [this message]
2018-12-03 17:40 ` [PATCH 2/2] ARM: dts: imx7: Correct mask for GIC PPI interrupts Fabio Estevam
2018-12-05 4:14 ` [PATCH 1/2] ARM: dts: imx6ul: " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1543858820-3354-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=liviu.dudau@arm.com \
--cc=marc.zyngier@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).