From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.4 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_PASS,UNPARSEABLE_RELAY,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id A195DC43612 for ; Fri, 4 Jan 2019 09:40:40 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 6E1A020874 for ; Fri, 4 Jan 2019 09:40:40 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="L6Rj9NHP" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 6E1A020874 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=mediatek.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Date:To:From:Subject:Message-ID:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=5vQusLSpZa9Cmvb+N/mHW1M8hWC7CDN6XY7U0sZ+E9k=; b=L6Rj9NHPCH+s7c LcuF3Nr1ZNCWkGxoyf1iLjsSys0FFJfs0uIuyVI3IREeesorGjCiJB5f3Q3igVhTsZPIXJu8hTBFN R2ZFZlm/YScuz0CndOpVoSe9MOIFkEVYWi4Me0C1U08rlIm56ByW1f0jCN1tBMCZCSHEUN1466F/T DToOJIslvmdN5+/tMyswhNrhKQ7xume9iJYtnBPDfIf7SLWnDqMB0LnYegARGIXkGnEj3pzFcCOJG CxBIZYdLVLOKM5KO/qHl3yfp2msg7MbVj9WOesGnsalDbttixUzJdAB6edEtYcEmLL5bjg6zWKTS/ ju6UgiAjANETMK/jiquA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gfLy0-0001jm-IA; Fri, 04 Jan 2019 09:40:36 +0000 Received: from mailgw02.mediatek.com ([216.200.240.185]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gfLxw-0001ii-In; Fri, 04 Jan 2019 09:40:34 +0000 X-UUID: dfe90d87ba124d7faa2db7a9cf271cde-20190104 X-UUID: dfe90d87ba124d7faa2db7a9cf271cde-20190104 Received: from mtkcas68.mediatek.inc [(172.29.94.19)] by mailgw02.mediatek.com (envelope-from ) (musrelay.mediatek.com ESMTP with TLS) with ESMTP id 1906616501; Fri, 04 Jan 2019 01:40:25 -0800 Received: from MTKMBS02N1.mediatek.inc (172.21.101.77) by MTKMBS62N2.mediatek.inc (172.29.193.42) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Fri, 4 Jan 2019 01:40:23 -0800 Received: from MTKCAS32.mediatek.inc (172.27.4.184) by mtkmbs02n1.mediatek.inc (172.21.101.77) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Fri, 4 Jan 2019 17:40:15 +0800 Received: from [10.17.3.153] (10.17.3.153) by MTKCAS32.mediatek.inc (172.27.4.170) with Microsoft SMTP Server id 15.0.1395.4 via Frontend Transport; Fri, 4 Jan 2019 17:40:14 +0800 Message-ID: <1546594814.21915.16.camel@mhfsdcap03> Subject: Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document From: Zhiyong Tao To: Sean Wang Date: Fri, 4 Jan 2019 17:40:14 +0800 In-Reply-To: References: <1545984581-25843-1-git-send-email-erin.lo@mediatek.com> <1545984581-25843-6-git-send-email-erin.lo@mediatek.com> <20181228220405.GA8739@bogus> <1546585723.21915.7.camel@mhfsdcap03> X-Mailer: Evolution 3.2.3-0ubuntu6 MIME-Version: 1.0 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190104_014032_632070_EABF894C X-CRM114-Status: GOOD ( 31.03 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , Rob Herring , Jason Cooper , srv_heupstream , "devicetree@vger.kernel.org" , Marc Zyngier , Greg Kroah-Hartman , Erin Lo =?UTF-8?Q?=28=E7=BE=85=E9=9B=85=E9=BD=A1=29?= , Stephen Boyd , "linux-kernel@vger.kernel.org" , "linux-mediatek@lists.infradead.org" , "linux-serial@vger.kernel.org" , Yingjoe Chen =?UTF-8?Q?=28=E9=99=B3=E8=8B=B1=E6=B4=B2=29?= , Matthias Brugger , Mars Cheng =?UTF-8?Q?=28=E9=84=AD=E6=A3=AE=E5=8F=8B=29?= , Thomas Gleixner , Eddie Huang =?UTF-8?Q?=28=E9=BB=83=E6=99=BA=E5=82=91=29?= , "linux-clk@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org On Fri, 2019-01-04 at 01:14 -0800, Sean Wang wrote: > On Thu, Jan 3, 2019 at 11:09 PM Zhiyong Tao wrote: > > > > On Sat, 2018-12-29 at 06:04 +0800, Rob Herring wrote: > > > On Fri, Dec 28, 2018 at 04:09:40PM +0800, Erin Lo wrote: > > > > From: Zhiyong Tao > > > > > > > > The commit adds mt8183 compatible node in binding document. > > > > > > > > Signed-off-by: Zhiyong Tao > > > > Signed-off-by: Erin Lo > > > > --- > > > > .../devicetree/bindings/pinctrl/pinctrl-mt8183.txt | 110 +++++++++++++++++++++ > > > > 1 file changed, 110 insertions(+) > > > > create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt > > > > > > > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt > > > > new file mode 100644 > > > > index 0000000..7b5285e > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt > > > > @@ -0,0 +1,110 @@ > > > > +* Mediatek MT8183 Pin Controller > > > > + > > > > +The Mediatek's Pin controller is used to control SoC pins. > > > > + > > > > +Required properties: > > > > +- compatible: value should be one of the following. > > > > + "mediatek,mt8183-pinctrl", compatible with mt8183 pinctrl. > > > > +- gpio-controller : Marks the device node as a gpio controller. > > > > +- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO > > > > + binding is used, the amount of cells must be specified as 2. See the below > > > > + mentioned gpio binding representation for description of particular cells. > > > > +- gpio-ranges : gpio valid number range. > > > > + > > > > + Eg: <&pio 6 0> > > > > + <[phandle of the gpio controller node] > > > > + [line number within the gpio controller] > > > > + [flags]> > > > > + > > > > + Values for gpio specifier: > > > > + - Line number: is a value between 0 to 202. > > > > + - Flags: bit field of flags, as defined in . > > > > + Only the following flags are supported: > > > > + 0 - GPIO_ACTIVE_HIGH > > > > + 1 - GPIO_ACTIVE_LOW > > > > + > > > > +Optional properties: > > > > +- reg: physicall address base for gpio base registers. > > > > > > s/physicall/physical/ > > > > > > reg should never be optional. > > > > > > Need to say how many reg entries. > > > > ==> Thanks for your suggestion. We will change 'reg' to Required > > properties and add the reg entries in next version. > > > > > > > +- reg-names: gpio base registers name. > > > > > > Need to say what are the names. However, I don't find the names in the > > > example all that useful, so I'd just drop it. > > > > ==> we will add the reg-names in next version. > > They are used in the sample code, such as: > > > + reg-names = "iocfg0", "iocfg1", "iocfg2", > > > > + "iocfg3", "iocfg4", "iocfg5", > > > > + "iocfg6", "iocfg7", "iocfg8"; > > > > > > > > > +- interrupt-controller: Marks the device node as an interrupt controller > > > > +- #interrupt-cells: Should be two. > > > > +- interrupts : The interrupt outputs from the controller. > > > > + > > > > +Please refer to pinctrl-bindings.txt in this directory for details of the > > > > +common pinctrl bindings used by client devices. > > > > + > > > > +Subnode format > > > > +A pinctrl node should contain at least one subnodes representing the > > > > +pinctrl groups available on the machine. Each subnode will list the > > > > +pins it needs, and how they should be configured, with regard to muxer > > > > +configuration, pullups, drive strength, input enable/disable and input schmitt. > > > > + > > > > + node { > > > > + pinmux = ; > > > > + GENERIC_PINCONFIG; > > > > + }; > > > > + > > > > +Required properties: > > > > +- pinmux: integer array, represents gpio pin number and mux setting. > > > > + Supported pin number and mux varies for different SoCs, and are defined > > > > + as macros in boot/dts/-pinfunc.h directly. > > > > + > > > > +Optional properties: > > > > +- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable, > > > > + bias-pull-down, bias-pull-up, input-enable, input-disable, output-low, output-high, > > > > + input-schmitt-enable, input-schmitt-disable and drive-strength are valid. > > > > + > > > > + Some special pins have extra pull up strength, there are R0 and R1 pull-up > > > > + resistors available, but for user, it's only need to set R1R0 as 00, 01, 10 or 11. > > > > + So when config mediatek,pull-up-adv or mediatek,pull-down-adv, > > > > + it support arguments for those special pins. > > > > + > > > > + When config drive-strength, it can support some arguments, such as > > > > + MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. > > > > + > > One point we can fix more is the drive-strength already is supported > as the generic one, not need to depend on a dedicated header file. ==> We think that we use MTK_DRIVE_4mA to set as driving in dts. it it more clear in v2 common driver for single pin -> single group mode. How about the idea? Thanks. > > > > > +Examples: > > > > + > > > > +#include "mt8183-pinfunc.h" > > > > + > > > > +... > > > > +{ > > > > + pio: pinctrl@10005000 { > > > > + compatible = "mediatek,mt8183-pinctrl"; > > > > + reg = <0 0x10005000 0 0x1000>, > > > > + <0 0x11F20000 0 0x1000>, > > > > + <0 0x11E80000 0 0x1000>, > > > > + <0 0x11E70000 0 0x1000>, > > > > + <0 0x11E90000 0 0x1000>, > > > > + <0 0x11D30000 0 0x1000>, > > > > + <0 0x11D20000 0 0x1000>, > > > > + <0 0x11C50000 0 0x1000>, > > > > + <0 0x11F30000 0 0x1000>; > > > > + reg-names = "iocfg0", "iocfg1", "iocfg2", > > > > + "iocfg3", "iocfg4", "iocfg5", > > > > + "iocfg6", "iocfg7", "iocfg8"; > > > > + gpio-controller; > > > > + #gpio-cells = <2>; > > > > + gpio-ranges = <&pio 0 0 192>; > > > > + interrupt-controller; > > > > + interrupts = ; > > > > + interrupt-parent = <&gic>; > > > > + #interrupt-cells = <2>; > > > > + > > > > + i2c0_pins_a: i2c0@0 { > > > > > > unit-address without reg property is not valid. > > > > ==> we will change "i2c0_pins_a: i2c0@0" to "i2c0_pins_a: i2c0" in the > > next version. > > > > > > > + pins1 { > > > > + pinmux = , > > > > + ; > > > > + mediatek,pull-up-adv = <11>; > > > > + }; > > > > + }; > > > > + > > > > + i2c1_pins_a: i2c1@0 { > > > > + pins { > > > > + pinmux = , > > > > + ; > > > > + mediatek,pull-down-adv = <10>; > > > > + }; > > > > + }; > > > > + ... > > > > + }; > > > > +}; > > > > -- > > > > 1.9.1 > > > > > > > > > > > > _______________________________________________ > > Linux-mediatek mailing list > > Linux-mediatek@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-mediatek _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel