linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Murray <andrew.murray@arm.com>
To: Christoffer Dall <christoffer.dall@arm.com>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Mark Rutland <mark.rutland@arm.com>
Cc: Julien Thierry <julien.thierry@arm.com>,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org,
	Suzuki K Poulose <suzuki.poulose@arm.com>
Subject: [PATCH v10 4/5] arm64: arm_pmu: Add support for exclude_host/exclude_guest attributes
Date: Mon, 14 Jan 2019 16:11:47 +0000	[thread overview]
Message-ID: <1547482308-29839-5-git-send-email-andrew.murray@arm.com> (raw)
In-Reply-To: <1547482308-29839-1-git-send-email-andrew.murray@arm.com>

Add support for the :G and :H attributes in perf by handling the
exclude_host/exclude_guest event attributes.

We notify KVM of counters that we wish to be enabled or disabled on
guest entry/exit and thus defer from starting or stopping :G events
as per the events exclude_host attribute.

With both VHE and non-VHE we switch the counters between host/guest
at EL2. We are able to eliminate counters counting host events on
the boundaries of guest entry/exit when using :G by filtering out
EL2 for exclude_host. However when using :H unless exclude_hv is set
on non-VHE then there is a small blackout window at the guest
entry/exit where host events are not captured.

Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
 arch/arm64/kernel/perf_event.c | 53 ++++++++++++++++++++++++++++++++++++------
 1 file changed, 46 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 1c71796..21c6831 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -26,6 +26,7 @@
 
 #include <linux/acpi.h>
 #include <linux/clocksource.h>
+#include <linux/kvm_host.h>
 #include <linux/of.h>
 #include <linux/perf/arm_pmu.h>
 #include <linux/platform_device.h>
@@ -528,11 +529,27 @@ static inline int armv8pmu_enable_counter(int idx)
 
 static inline void armv8pmu_enable_event_counter(struct perf_event *event)
 {
+	struct perf_event_attr *attr = &event->attr;
 	int idx = event->hw.idx;
+	int flags = 0;
+	u32 counter_bits = BIT(ARMV8_IDX_TO_COUNTER(idx));
 
-	armv8pmu_enable_counter(idx);
 	if (armv8pmu_event_is_chained(event))
-		armv8pmu_enable_counter(idx - 1);
+		counter_bits |= BIT(ARMV8_IDX_TO_COUNTER(idx - 1));
+
+	if (!attr->exclude_host)
+		flags |= KVM_PMU_EVENTS_HOST;
+	if (!attr->exclude_guest)
+		flags |= KVM_PMU_EVENTS_GUEST;
+
+	kvm_set_pmu_events(counter_bits, flags);
+
+	/* We rely on the hypervisor switch code to enable guest counters */
+	if (!attr->exclude_host) {
+		armv8pmu_enable_counter(idx);
+		if (armv8pmu_event_is_chained(event))
+			armv8pmu_enable_counter(idx - 1);
+	}
 }
 
 static inline int armv8pmu_disable_counter(int idx)
@@ -545,11 +562,21 @@ static inline int armv8pmu_disable_counter(int idx)
 static inline void armv8pmu_disable_event_counter(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
+	struct perf_event_attr *attr = &event->attr;
 	int idx = hwc->idx;
+	u32 counter_bits = BIT(ARMV8_IDX_TO_COUNTER(idx));
 
 	if (armv8pmu_event_is_chained(event))
-		armv8pmu_disable_counter(idx - 1);
-	armv8pmu_disable_counter(idx);
+		counter_bits |= BIT(ARMV8_IDX_TO_COUNTER(idx - 1));
+
+	kvm_clr_pmu_events(counter_bits);
+
+	/* We rely on the hypervisor switch code to disable guest counters */
+	if (!attr->exclude_host) {
+		if (armv8pmu_event_is_chained(event))
+			armv8pmu_disable_counter(idx - 1);
+		armv8pmu_disable_counter(idx);
+	}
 }
 
 static inline int armv8pmu_enable_intens(int idx)
@@ -824,16 +851,25 @@ static int armv8pmu_set_event_filter(struct hw_perf_event *event,
 	 * Therefore we ignore exclude_hv in this configuration, since
 	 * there's no hypervisor to sample anyway. This is consistent
 	 * with other architectures (x86 and Power).
+	 *
+	 * To eliminate counting host events on the boundaries of
+	 * guest entry/exit we ensure EL2 is not included in hyp mode
+	 * with !exclude_host.
 	 */
 	if (is_kernel_in_hyp_mode()) {
-		if (!attr->exclude_kernel)
+		if (!attr->exclude_kernel && !attr->exclude_host)
 			config_base |= ARMV8_PMU_INCLUDE_EL2;
 	} else {
-		if (attr->exclude_kernel)
-			config_base |= ARMV8_PMU_EXCLUDE_EL1;
 		if (!attr->exclude_hv)
 			config_base |= ARMV8_PMU_INCLUDE_EL2;
 	}
+
+	/*
+	 * Filter out !VHE kernels and guest kernels
+	 */
+	if (attr->exclude_kernel)
+		config_base |= ARMV8_PMU_EXCLUDE_EL1;
+
 	if (attr->exclude_user)
 		config_base |= ARMV8_PMU_EXCLUDE_EL0;
 
@@ -863,6 +899,9 @@ static void armv8pmu_reset(void *info)
 		armv8pmu_disable_intens(idx);
 	}
 
+	/* Clear the counters we flip at guest entry/exit */
+	kvm_clr_pmu_events(U32_MAX);
+
 	/*
 	 * Initialize & Reset PMNC. Request overflow interrupt for
 	 * 64 bit cycle counter but cheat in armv8pmu_write_counter().
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-01-14 16:12 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-14 16:11 [PATCH v10 0/5] arm64: Support perf event modifiers :G and :H Andrew Murray
2019-01-14 16:11 ` [PATCH v10 1/5] arm64: arm_pmu: remove unnecessary isb instruction Andrew Murray
2019-01-14 16:11 ` [PATCH v10 2/5] arm64: KVM: encapsulate kvm_cpu_context in kvm_host_data Andrew Murray
2019-01-14 16:11 ` [PATCH v10 3/5] arm64: KVM: add accessors to track guest/host only counters Andrew Murray
2019-01-14 16:11 ` Andrew Murray [this message]
2019-02-11 11:26   ` [PATCH v10 4/5] arm64: arm_pmu: Add support for exclude_host/exclude_guest attributes Will Deacon
2019-02-18 21:53   ` Christoffer Dall
2019-02-20 16:15     ` Andrew Murray
2019-02-26 12:44       ` Christoffer Dall
2019-03-04 11:14         ` Andrew Murray
2019-03-05 11:45           ` Andrew Murray
2019-03-06  8:42             ` Christoffer Dall
2019-01-14 16:11 ` [PATCH v10 5/5] arm64: KVM: Enable support for :G/:H perf event modifiers Andrew Murray
2019-02-18 22:00   ` Christoffer Dall
2019-03-04  9:40     ` Andrew Murray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1547482308-29839-5-git-send-email-andrew.murray@arm.com \
    --to=andrew.murray@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=christoffer.dall@arm.com \
    --cc=julien.thierry@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=suzuki.poulose@arm.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).