From: Amit Daniel Kachhap <amit.kachhap@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Andrew Jones <drjones@redhat.com>,
Marc Zyngier <marc.zyngier@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Christoffer Dall <christoffer.dall@arm.com>,
Kristina Martsenko <kristina.martsenko@arm.com>,
kvmarm@lists.cs.columbia.edu,
Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>,
Amit Daniel Kachhap <amit.kachhap@arm.com>,
Dave Martin <Dave.Martin@arm.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 4/5] arm64/kvm: add a userspace option to enable pointer authentication
Date: Mon, 28 Jan 2019 12:28:45 +0530 [thread overview]
Message-ID: <1548658727-14271-5-git-send-email-amit.kachhap@arm.com> (raw)
In-Reply-To: <1548658727-14271-1-git-send-email-amit.kachhap@arm.com>
This feature will allow the KVM guest to allow the handling of
pointer authentication instructions or to treat them as undefined
if not set. It uses the existing vcpu API KVM_ARM_VCPU_INIT to
supply this parameter instead of creating a new API.
A new register is not created to pass this parameter via
SET/GET_ONE_REG interface as just a flag (KVM_ARM_VCPU_PTRAUTH)
supplied is enough to enable this feature.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Kristina Martsenko <kristina.martsenko@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Cc: Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
Documentation/arm64/pointer-authentication.txt | 9 +++++----
Documentation/virtual/kvm/api.txt | 4 ++++
arch/arm/include/asm/kvm_host.h | 4 ++++
arch/arm64/include/asm/kvm_host.h | 7 ++++---
arch/arm64/include/uapi/asm/kvm.h | 1 +
arch/arm64/kvm/handle_exit.c | 3 ++-
arch/arm64/kvm/hyp/ptrauth-sr.c | 13 +++++++++++++
arch/arm64/kvm/reset.c | 3 +++
include/uapi/linux/kvm.h | 1 +
9 files changed, 37 insertions(+), 8 deletions(-)
diff --git a/Documentation/arm64/pointer-authentication.txt b/Documentation/arm64/pointer-authentication.txt
index a25cd21..0529a7d 100644
--- a/Documentation/arm64/pointer-authentication.txt
+++ b/Documentation/arm64/pointer-authentication.txt
@@ -82,7 +82,8 @@ pointers).
Virtualization
--------------
-Pointer authentication is not currently supported in KVM guests. KVM
-will mask the feature bits from ID_AA64ISAR1_EL1, and attempted use of
-the feature will result in an UNDEFINED exception being injected into
-the guest.
+Pointer authentication is enabled in KVM guest when virtual machine is
+created by passing a flag (KVM_ARM_VCPU_PTRAUTH) requesting this feature
+to be enabled. Without this flag, pointer authentication is not enabled
+in KVM guests and attempted use of the feature will result in an UNDEFINED
+exception being injected into the guest.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 356156f..1e646fb 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -2642,6 +2642,10 @@ Possible features:
Depends on KVM_CAP_ARM_PSCI_0_2.
- KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
Depends on KVM_CAP_ARM_PMU_V3.
+ - KVM_ARM_VCPU_PTRAUTH: Emulate Pointer authentication for the CPU.
+ Depends on KVM_CAP_ARM_PTRAUTH and only on arm64 architecture. If
+ set, then the KVM guest allows the execution of pointer authentication
+ instructions or treats them as undefined if not set.
4.83 KVM_ARM_PREFERRED_TARGET
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index b200c14..b6950df 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -346,6 +346,10 @@ static inline int kvm_arm_have_ssbd(void)
static inline void kvm_vcpu_load_sysregs(struct kvm_vcpu *vcpu) {}
static inline void kvm_vcpu_put_sysregs(struct kvm_vcpu *vcpu) {}
static inline void kvm_arm_vcpu_ptrauth_reset(struct kvm_vcpu *vcpu) {}
+static inline bool kvm_arm_vcpu_ptrauth_allowed(struct kvm_vcpu *vcpu)
+{
+ return false;
+}
#define __KVM_HAVE_ARCH_VM_ALLOC
struct kvm *kvm_arch_alloc_vm(void);
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index c798d0c..4a6ec40 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -43,7 +43,7 @@
#define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
-#define KVM_VCPU_MAX_FEATURES 4
+#define KVM_VCPU_MAX_FEATURES 5
#define KVM_REQ_SLEEP \
KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
@@ -453,14 +453,15 @@ static inline bool kvm_arch_requires_vhe(void)
void kvm_arm_vcpu_ptrauth_enable(struct kvm_vcpu *vcpu);
void kvm_arm_vcpu_ptrauth_disable(struct kvm_vcpu *vcpu);
+bool kvm_arm_vcpu_ptrauth_allowed(struct kvm_vcpu *vcpu);
static inline void kvm_arm_vcpu_ptrauth_reset(struct kvm_vcpu *vcpu)
{
/* Disable ptrauth and use it in a lazy context via traps */
- if (has_vhe() && kvm_supports_ptrauth())
+ if (has_vhe() && kvm_supports_ptrauth()
+ && kvm_arm_vcpu_ptrauth_allowed(vcpu))
kvm_arm_vcpu_ptrauth_disable(vcpu);
}
-
void kvm_arm_vcpu_ptrauth_trap(struct kvm_vcpu *vcpu);
static inline void kvm_arch_hardware_unsetup(void) {}
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 97c3478..5f82ca1 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -102,6 +102,7 @@ struct kvm_regs {
#define KVM_ARM_VCPU_EL1_32BIT 1 /* CPU running a 32bit VM */
#define KVM_ARM_VCPU_PSCI_0_2 2 /* CPU uses PSCI v0.2 */
#define KVM_ARM_VCPU_PMU_V3 3 /* Support guest PMUv3 */
+#define KVM_ARM_VCPU_PTRAUTH 4 /* VCPU uses address authentication */
struct kvm_vcpu_init {
__u32 target;
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 5b980e7..c0e5dcd 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -179,7 +179,8 @@ static int handle_sve(struct kvm_vcpu *vcpu, struct kvm_run *run)
*/
void kvm_arm_vcpu_ptrauth_trap(struct kvm_vcpu *vcpu)
{
- if (has_vhe() && kvm_supports_ptrauth())
+ if (has_vhe() && kvm_supports_ptrauth()
+ && kvm_arm_vcpu_ptrauth_allowed(vcpu))
kvm_arm_vcpu_ptrauth_enable(vcpu);
else
kvm_inject_undefined(vcpu);
diff --git a/arch/arm64/kvm/hyp/ptrauth-sr.c b/arch/arm64/kvm/hyp/ptrauth-sr.c
index 0576c01..369624f 100644
--- a/arch/arm64/kvm/hyp/ptrauth-sr.c
+++ b/arch/arm64/kvm/hyp/ptrauth-sr.c
@@ -42,3 +42,16 @@ void __no_ptrauth __hyp_text __ptrauth_switch_to_host(struct kvm_vcpu *vcpu,
ptrauth_keys_store((struct ptrauth_keys *) &guest_ctxt->sys_regs[APIAKEYLO_EL1]);
ptrauth_keys_switch((struct ptrauth_keys *) &host_ctxt->sys_regs[APIAKEYLO_EL1]);
}
+
+/**
+ * kvm_arm_vcpu_ptrauth_allowed - checks if ptrauth feature is present in vcpu
+ *
+ * @vcpu: The VCPU pointer
+ *
+ * This function will be used to enable/disable ptrauth in guest as configured
+ * by the KVM userspace API.
+ */
+bool kvm_arm_vcpu_ptrauth_allowed(struct kvm_vcpu *vcpu)
+{
+ return test_bit(KVM_ARM_VCPU_PTRAUTH, vcpu->arch.features);
+}
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index b72a3dd..987e0c3c 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -91,6 +91,9 @@ int kvm_arch_vm_ioctl_check_extension(struct kvm *kvm, long ext)
case KVM_CAP_ARM_VM_IPA_SIZE:
r = kvm_ipa_limit;
break;
+ case KVM_CAP_ARM_PTRAUTH:
+ r = kvm_supports_ptrauth();
+ break;
default:
r = 0;
}
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 6d4ea4b..a553477 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -988,6 +988,7 @@ struct kvm_ppc_resize_hpt {
#define KVM_CAP_ARM_VM_IPA_SIZE 165
#define KVM_CAP_MANUAL_DIRTY_LOG_PROTECT 166
#define KVM_CAP_HYPERV_CPUID 167
+#define KVM_CAP_ARM_PTRAUTH 168
#ifdef KVM_CAP_IRQ_ROUTING
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-28 7:00 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-28 6:58 [PATCH v5 0/6] Add ARMv8.3 pointer authentication for kvm guest Amit Daniel Kachhap
2019-01-28 6:58 ` [PATCH v5 1/5] arm64: Add utilities to save restore pointer authentication keys Amit Daniel Kachhap
2019-01-31 16:20 ` James Morse
2019-02-13 17:32 ` Kristina Martsenko
2019-02-14 10:53 ` Amit Daniel Kachhap
2019-01-28 6:58 ` [PATCH v5 2/5] arm64/kvm: preserve host HCR_EL2/MDCR_EL2 value Amit Daniel Kachhap
2019-01-31 16:22 ` James Morse
2019-02-14 9:49 ` Amit Daniel Kachhap
2019-02-13 17:34 ` Kristina Martsenko
2019-02-14 11:03 ` Amit Daniel Kachhap
2019-02-15 15:50 ` Kristina Martsenko
2019-01-28 6:58 ` [PATCH v5 3/5] arm64/kvm: context-switch ptrauth registers Amit Daniel Kachhap
2019-01-28 14:25 ` Julien Thierry
2019-01-31 16:25 ` [PATCH v5 3/5] arm64/kvm: context-switch ptrauth register James Morse
2019-02-13 17:35 ` Kristina Martsenko
2019-02-15 4:00 ` Amit Daniel Kachhap
2019-02-14 10:16 ` Amit Daniel Kachhap
2019-02-13 17:34 ` [PATCH v5 3/5] arm64/kvm: context-switch ptrauth registers Kristina Martsenko
2019-02-14 11:06 ` Amit Daniel Kachhap
2019-01-28 6:58 ` Amit Daniel Kachhap [this message]
2019-01-28 14:35 ` [PATCH v5 4/5] arm64/kvm: add a userspace option to enable pointer authentication Julien Thierry
2019-01-31 16:27 ` James Morse
2019-02-14 10:47 ` Amit Daniel Kachhap
2019-02-13 17:35 ` Kristina Martsenko
2019-02-15 4:49 ` Amit Daniel Kachhap
2019-01-28 6:58 ` [PATCH v5 5/5] arm64/kvm: control accessibility of ptrauth key registers Amit Daniel Kachhap
2019-02-13 17:35 ` Kristina Martsenko
2019-02-13 17:54 ` Dave P Martin
2019-02-15 4:57 ` Amit Daniel Kachhap
2019-01-28 6:58 ` [kvmtool PATCH v5 6/6] arm/kvm: arm64: Add a vcpu feature for pointer authentication Amit Daniel Kachhap
2019-01-28 14:56 ` Julien Thierry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548658727-14271-5-git-send-email-amit.kachhap@arm.com \
--to=amit.kachhap@arm.com \
--cc=Dave.Martin@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=drjones@redhat.com \
--cc=kristina.martsenko@arm.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=ramana.radhakrishnan@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).