From: Andrew Murray <andrew.murray@arm.com>
To: Christoffer Dall <christoffer.dall@arm.com>,
Marc Zyngier <marc.zyngier@arm.com>
Cc: Julien Thierry <julien.thierry@arm.com>,
kvmarm@lists.cs.columbia.edu,
linux-arm-kernel@lists.infradead.org, suzuki.poulose@arm.com
Subject: [PATCH v2 4/5] KVM: arm/arm64: lazily create perf events on enable
Date: Mon, 4 Feb 2019 16:53:37 +0000 [thread overview]
Message-ID: <1549299218-44714-5-git-send-email-andrew.murray@arm.com> (raw)
In-Reply-To: <1549299218-44714-1-git-send-email-andrew.murray@arm.com>
To prevent re-creating perf events everytime the counter registers
are changed, let's instead lazily create the event when the event
is first enabled and destroy it when it changes.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
---
virt/kvm/arm/pmu.c | 96 ++++++++++++++++++++++++++++++++++++++----------------
1 file changed, 68 insertions(+), 28 deletions(-)
diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c
index 95d74ec..a64aeb2 100644
--- a/virt/kvm/arm/pmu.c
+++ b/virt/kvm/arm/pmu.c
@@ -24,7 +24,10 @@
#include <kvm/arm_pmu.h>
#include <kvm/arm_vgic.h>
+static void kvm_pmu_sync_counter_enable(struct kvm_vcpu *vcpu, u64 select_idx);
static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx);
+static void kvm_pmu_stop_counter(struct kvm_vcpu *vcpu, struct kvm_pmc *pmc);
+
/**
* kvm_pmu_get_counter_value - get PMU counter value
* @vcpu: The vcpu pointer
@@ -59,13 +62,15 @@ u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx)
void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val)
{
u64 reg;
+ struct kvm_pmu *pmu = &vcpu->arch.pmu;
+ struct kvm_pmc *pmc = &pmu->pmc[select_idx];
reg = (select_idx == ARMV8_PMU_CYCLE_IDX)
? PMCCNTR_EL0 : PMEVCNTR0_EL0 + select_idx;
__vcpu_sys_reg(vcpu, reg) += (s64)val - kvm_pmu_get_counter_value(vcpu, select_idx);
- /* Recreate the perf event to reflect the updated sample_period */
- kvm_pmu_create_perf_event(vcpu, select_idx);
+ kvm_pmu_stop_counter(vcpu, pmc);
+ kvm_pmu_sync_counter_enable(vcpu, select_idx);
}
/**
@@ -83,6 +88,7 @@ static void kvm_pmu_release_perf_event(struct kvm_pmc *pmc)
/**
* kvm_pmu_stop_counter - stop PMU counter
+ * @vcpu: The vcpu pointer
* @pmc: The PMU counter pointer
*
* If this counter has been configured to monitor some event, release it here.
@@ -143,6 +149,24 @@ u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu)
}
/**
+ * kvm_pmu_enable_counter - create/enable a counter
+ * @vcpu: The vcpu pointer
+ * @select_idx: The counter index
+ */
+static void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, u64 select_idx)
+{
+ struct kvm_pmu *pmu = &vcpu->arch.pmu;
+ struct kvm_pmc *pmc = &pmu->pmc[select_idx];
+
+ if (!pmc->perf_event)
+ kvm_pmu_create_perf_event(vcpu, select_idx);
+
+ perf_event_enable(pmc->perf_event);
+ if (pmc->perf_event->state != PERF_EVENT_STATE_ACTIVE)
+ kvm_debug("failed to enable perf event\n");
+}
+
+/**
* kvm_pmu_enable_counter_mask - enable selected PMU counters
* @vcpu: The vcpu pointer
* @val: the value guest writes to PMCNTENSET register
@@ -152,8 +176,6 @@ u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu)
void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
{
int i;
- struct kvm_pmu *pmu = &vcpu->arch.pmu;
- struct kvm_pmc *pmc;
if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) || !val)
return;
@@ -162,16 +184,39 @@ void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
if (!(val & BIT(i)))
continue;
- pmc = &pmu->pmc[i];
- if (pmc->perf_event) {
- perf_event_enable(pmc->perf_event);
- if (pmc->perf_event->state != PERF_EVENT_STATE_ACTIVE)
- kvm_debug("fail to enable perf event\n");
- }
+ kvm_pmu_enable_counter(vcpu, i);
}
}
/**
+ * kvm_pmu_sync_counter_enable - reenable a counter if it should be enabled
+ * @vcpu: The vcpu pointer
+ * @select_idx: The counter index
+ */
+static void kvm_pmu_sync_counter_enable(struct kvm_vcpu *vcpu,
+ u64 select_idx)
+{
+ u64 set = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
+
+ if (set & BIT(select_idx))
+ kvm_pmu_enable_counter_mask(vcpu, BIT(select_idx));
+}
+
+/**
+ * kvm_pmu_disable_counter - disable selected PMU counter
+ * @vcpu: The vcpu pointer
+ * @pmc: The counter to disable
+ */
+static void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, u64 select_idx)
+{
+ struct kvm_pmu *pmu = &vcpu->arch.pmu;
+ struct kvm_pmc *pmc = &pmu->pmc[select_idx];
+
+ if (pmc->perf_event)
+ perf_event_disable(pmc->perf_event);
+}
+
+/**
* kvm_pmu_disable_counter_mask - disable selected PMU counters
* @vcpu: The vcpu pointer
* @val: the value guest writes to PMCNTENCLR register
@@ -181,8 +226,6 @@ void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
{
int i;
- struct kvm_pmu *pmu = &vcpu->arch.pmu;
- struct kvm_pmc *pmc;
if (!val)
return;
@@ -191,9 +234,7 @@ void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
if (!(val & BIT(i)))
continue;
- pmc = &pmu->pmc[i];
- if (pmc->perf_event)
- perf_event_disable(pmc->perf_event);
+ kvm_pmu_disable_counter(vcpu, i);
}
}
@@ -375,16 +416,9 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
}
}
-static bool kvm_pmu_counter_is_enabled(struct kvm_vcpu *vcpu, u64 select_idx)
-{
- return (__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) &&
- (__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & BIT(select_idx));
-}
-
/**
- * kvm_pmu_create_perf_event - create a perf event for a counter
+ * kvm_pmu_counter_create_enabled_perf_event - create a perf event for a counter
* @vcpu: The vcpu pointer
- * @data: Type of event as per PMXEVTYPER_EL0 format
* @select_idx: The number of selected counter
*/
static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx)
@@ -399,7 +433,6 @@ static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx)
? PMCCFILTR_EL0 : PMEVTYPER0_EL0 + select_idx;
data = __vcpu_sys_reg(vcpu, reg);
- kvm_pmu_stop_counter(vcpu, pmc);
eventsel = data & ARMV8_PMU_EVTYPE_EVENT;
/* Software increment event does't need to be backed by a perf event */
@@ -411,7 +444,7 @@ static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx)
attr.type = PERF_TYPE_RAW;
attr.size = sizeof(attr);
attr.pinned = 1;
- attr.disabled = !kvm_pmu_counter_is_enabled(vcpu, select_idx);
+ attr.disabled = 1;
attr.exclude_user = data & ARMV8_PMU_EXCLUDE_EL0 ? 1 : 0;
attr.exclude_kernel = data & ARMV8_PMU_EXCLUDE_EL1 ? 1 : 0;
attr.exclude_hv = 1; /* Don't count EL2 events */
@@ -447,10 +480,17 @@ static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx)
void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
u64 select_idx)
{
- u64 event_type = data & ARMV8_PMU_EVTYPE_MASK;
+ struct kvm_pmu *pmu = &vcpu->arch.pmu;
+ struct kvm_pmc *pmc = &pmu->pmc[select_idx];
+ u64 reg, event_type = data & ARMV8_PMU_EVTYPE_MASK;
+
+ kvm_pmu_stop_counter(vcpu, pmc);
+
+ reg = (select_idx == ARMV8_PMU_CYCLE_IDX)
+ ? PMCCFILTR_EL0 : PMEVTYPER0_EL0 + select_idx;
- __vcpu_sys_reg(vcpu, PMEVTYPER0_EL0 + select_idx) = event_type;
- kvm_pmu_create_perf_event(vcpu, select_idx);
+ __vcpu_sys_reg(vcpu, reg) = event_type;
+ kvm_pmu_sync_counter_enable(vcpu, select_idx);
}
bool kvm_arm_support_pmu_v3(void)
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-04 16:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 16:53 [PATCH v2 0/5] KVM: arm/arm64: add support for chained counters Andrew Murray
2019-02-04 16:53 ` [PATCH v2 1/5] KVM: arm/arm64: rename kvm_pmu_{enable/disable}_counter functions Andrew Murray
2019-02-05 12:21 ` Julien Thierry
2019-02-11 17:23 ` Suzuki K Poulose
2019-02-04 16:53 ` [PATCH v2 2/5] KVM: arm/arm64: extract duplicated code to own function Andrew Murray
2019-02-04 16:53 ` [PATCH v2 3/5] KVM: arm/arm64: re-create event when setting counter value Andrew Murray
2019-02-05 12:21 ` Julien Thierry
2019-02-05 12:27 ` Andrew Murray
2019-02-13 14:28 ` Suzuki K Poulose
2019-02-18 9:39 ` Andrew Murray
2019-02-04 16:53 ` Andrew Murray [this message]
2019-02-14 11:36 ` [PATCH v2 4/5] KVM: arm/arm64: lazily create perf events on enable Suzuki K Poulose
2019-02-18 9:57 ` Andrew Murray
2019-02-04 16:53 ` [PATCH v2 5/5] KVM: arm/arm64: support chained PMU counters Andrew Murray
2019-02-05 14:33 ` Julien Thierry
2019-02-14 11:42 ` Suzuki K Poulose
2019-02-18 12:03 ` Andrew Murray
2019-02-18 14:02 ` Marc Zyngier
2019-02-18 10:11 ` Andrew Murray
2019-02-18 8:52 ` [PATCH v2 0/5] KVM: arm/arm64: add support for chained counters Marc Zyngier
2019-02-18 12:10 ` Andrew Murray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1549299218-44714-5-git-send-email-andrew.murray@arm.com \
--to=andrew.murray@arm.com \
--cc=christoffer.dall@arm.com \
--cc=julien.thierry@arm.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marc.zyngier@arm.com \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).