[PATCH RESEND V3 0/2] pinctrl: bcm2835: Improve generic behavior

[PATCH RESEND V3 0/2] pinctrl: bcm2835: Improve generic behavior

[Stefan Wahren]

This series is the non-controversial part of "pinctrl: bcm2835: improve
libgpiod output". It has been split up in order to apply for the next
kernel release.

Changes in V3:
- drop patches #3 and #4 from former series

Stefan Wahren (2):
  pinctrl: bcm2835: declare pin config as generic
  pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl

 drivers/pinctrl/bcm/pinctrl-bcm2835.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH RESEND V3 1/2] pinctrl: bcm2835: declare pin config as generic

[Stefan Wahren]

Since commit 0de704955ee44 ("pinctrl: bcm2835: Add support for
generic pinctrl binding") this driver is capable to use the generic
interface. So declare this accordingly.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index f180aa4..19eb4fd 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -969,6 +969,7 @@ static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
 }
 
 static const struct pinconf_ops bcm2835_pinconf_ops = {
+	.is_generic = true,
 	.pin_config_get = bcm2835_pinconf_get,
 	.pin_config_set = bcm2835_pinconf_set,
 };
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH RESEND V3 2/2] pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl

[Stefan Wahren]

In order to support GPIO config changes direct these to the generic pinctrl.
This also requires an adjust of the return code for unsupported parameter
otherwise gpiod_configure_flags wont work as expected.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 19eb4fd..183d1ff 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -341,6 +341,7 @@ static const struct gpio_chip bcm2835_gpio_chip = {
 	.get_direction = bcm2835_gpio_get_direction,
 	.get = bcm2835_gpio_get,
 	.set = bcm2835_gpio_set,
+	.set_config = gpiochip_generic_config,
 	.base = -1,
 	.ngpio = BCM2835_NUM_GPIOS,
 	.can_sleep = false,
@@ -960,7 +961,7 @@ static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
 			break;
 
 		default:
-			return -EINVAL;
+			return -ENOTSUPP;
 
 		} /* switch param type */
 	} /* for each config */
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel