[PATCH 11/14] arm64: dts: imx8: split adma ss into dma and audio ss

[Aisheng Dong <aisheng.dong@nxp.com>]

amda ss is consisted of dma and audio ss in qxp which are
also used in qm.
Let's split them into two ss for better code reuse.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi    | 274 +-------------------
 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi     | 279 +++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts      |   4 +-
 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi |  10 +-
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi         |   2 +-
 5 files changed, 288 insertions(+), 281 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
index 835ecf7..991aaab 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
@@ -4,276 +4,4 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
-#include <dt-bindings/firmware/imx/rsrc.h>
-
-adma_subsys: bus@59000000 {
-	compatible = "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x59000000 0x0 0x59000000 0x2000000>;
-
-	/* SCU clocks */
-	adma_ipg_clk: clock-adma-ipg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <120000000>;
-		clock-output-names = "adma_ipg_clk";
-	};
-
-	adc0_clk: clock-adc0 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_ADC_0>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "adc0_clk";
-	};
-
-	can0_clk: clock-can0 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_CAN_0>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "can0_clk";
-	};
-
-	ftm0_clk: clock-ftm0 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_FTM_0>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "ftm0_clk";
-	};
-
-	ftm1_clk: clock-ftm1 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_FTM_1>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "ftm1_clk";
-	};
-
-	i2c0_clk: clock-i2c0 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_I2C_0>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "i2c0_clk";
-	};
-
-	i2c1_clk: clock-i2c1 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_I2C_1>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "i2c1_clk";
-	};
-
-	i2c2_clk: clock-i2c2 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_I2C_2>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "i2c2_clk";
-	};
-
-	i2c3_clk: clock-i2c3 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_I2C_3>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "i2c3_clk";
-	};
-
-	lcd0_clk: clock-lcd0 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_LCD_0>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "lcd0_clk";
-	};
-
-	lcd0_pwm0_clk: clock-lcd0-pwm0 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_LCD_0_PWM_0>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "lcd0_pwm0_clk";
-	};
-
-	spi0_clk: clock-spi0 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_SPI_0>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "spi0_clk";
-	};
-
-	spi1_clk: clock-spi1 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_SPI_1>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "spi1_clk";
-	};
-
-	spi2_clk: clock-spi2 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_SPI_2>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "spi2_clk";
-	};
-
-	spi3_clk: clock-spi3 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_SPI_3>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "spi3_clk";
-	};
-
-	uart0_clk: clock-uart0 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_UART_0>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "uart0_clk";
-	};
-
-	uart1_clk: clock-uart1 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_UART_1>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "uart1_clk";
-	};
-
-	uart2_clk: clock-uart2 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_UART_2>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "uart2_clk";
-	};
-
-	uart3_clk: clock-uart3 {
-		#clock-cells = <0>;
-		rsrc-id = <IMX_SC_R_UART_3>;
-		clk-type = <IMX_SC_PM_CLK_PER>;
-		clock-output-names = "uart3_clk";
-	};
-
-	/* LPCG clocks */
-	uart0_lpcg: clock-controller@5a460000 {
-		reg = <0x5a460000 0x10000>;
-		#clock-cells = <1>;
-		clocks = <&uart0_clk>, <&adma_ipg_clk>;
-		bit-offset = <0 16>;
-		clock-output-names = "uart0_lpcg_baud_clk",
-				     "uart0_lpcg_ipg_clk";
-	};
-
-	uart1_lpcg: clock-controller@5a470000 {
-		reg = <0x5a470000 0x10000>;
-		#clock-cells = <1>;
-		clocks = <&uart1_clk>, <&adma_ipg_clk>;
-		bit-offset = <0 16>;
-		clock-output-names = "uart1_lpcg_baud_clk",
-				     "uart1_lpcg_ipg_clk";
-	};
-
-	uart2_lpcg: clock-controller@5a480000 {
-		reg = <0x5a480000 0x10000>;
-		#clock-cells = <1>;
-		clocks = <&uart2_clk>, <&adma_ipg_clk>;
-		bit-offset = <0 16>;
-		clock-output-names = "uart2_lpcg_baud_clk",
-				     "uart2_lpcg_ipg_clk";
-	};
-
-	uart3_lpcg: clock-controller@5a490000 {
-		reg = <0x5a490000 0x10000>;
-		#clock-cells = <1>;
-		clocks = <&uart3_clk>, <&adma_ipg_clk>;
-		bit-offset = <0 16>;
-		clock-output-names = "uart3_lpcg_baud_clk",
-				     "uart3_lpcg_ipg_clk";
-	};
-
-	i2c0_lpcg: clock-controller@5ac00000 {
-		reg = <0x5ac00000 0x10000>;
-		#clock-cells = <1>;
-		clocks = <&i2c0_clk>, <&adma_ipg_clk>;
-		bit-offset = <0 16>;
-		clock-output-names = "i2c0_lpcg_clk",
-				     "i2c0_lpcg_ipg_clk";
-	};
-
-	i2c1_lpcg: clock-controller@5ac10000 {
-		reg = <0x5ac10000 0x10000>;
-		#clock-cells = <1>;
-		clocks = <&i2c1_clk>, <&adma_ipg_clk>;
-		bit-offset = <0 16>;
-		clock-output-names = "i2c1_lpcg_clk",
-				     "i2c1_lpcg_ipg_clk";
-	};
-
-	i2c2_lpcg: clock-controller@5ac20000 {
-		reg = <0x5ac20000 0x10000>;
-		#clock-cells = <1>;
-		clocks = <&i2c2_clk>, <&adma_ipg_clk>;
-		bit-offset = <0 16>;
-		clock-output-names = "i2c2_lpcg_clk",
-				     "i2c2_lpcg_ipg_clk";
-	};
-
-	i2c3_lpcg: clock-controller@5ac30000 {
-		reg = <0x5ac30000 0x10000>;
-		#clock-cells = <1>;
-		clocks = <&i2c3_clk>, <&adma_ipg_clk>;
-		bit-offset = <0 16>;
-		clock-output-names = "i2c3_lpcg_clk",
-				     "i2c3_lpcg_ipg_clk";
-	};
-
-	adma_lpuart0: serial@5a060000 {
-		reg = <0x5a060000 0x1000>;
-		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gic>;
-		clocks = <&uart0_lpcg 0>;
-		clock-names = "ipg";
-		power-domains = <&pd IMX_SC_R_UART_0>;
-		status = "disabled";
-	};
-
-	adma_i2c0: i2c@5a800000 {
-		reg = <0x5a800000 0x4000>;
-		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gic>;
-		clocks = <&i2c0_lpcg 0>;
-		clock-names = "per";
-		assigned-clocks = <&i2c0_clk>;
-		assigned-clock-rates = <24000000>;
-		power-domains = <&pd IMX_SC_R_I2C_0>;
-		status = "disabled";
-	};
-
-	adma_i2c1: i2c@5a810000 {
-		reg = <0x5a810000 0x4000>;
-		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gic>;
-		clocks = <&i2c1_lpcg 0>;
-		clock-names = "per";
-		assigned-clocks = <&i2c1_clk>;
-		assigned-clock-rates = <24000000>;
-		power-domains = <&pd IMX_SC_R_I2C_1>;
-		status = "disabled";
-	};
-
-	adma_i2c2: i2c@5a820000 {
-		reg = <0x5a820000 0x4000>;
-		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gic>;
-		clocks = <&i2c2_lpcg 0>;
-		clock-names = "per";
-		assigned-clocks = <&i2c2_clk>;
-		assigned-clock-rates = <24000000>;
-		power-domains = <&pd IMX_SC_R_I2C_2>;
-		status = "disabled";
-	};
-
-	adma_i2c3: i2c@5a830000 {
-		reg = <0x5a830000 0x4000>;
-		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gic>;
-		clocks = <&i2c3_lpcg 0>;
-		clock-names = "per";
-		assigned-clocks = <&i2c3_clk>;
-		assigned-clock-rates = <24000000>;
-		power-domains = <&pd IMX_SC_R_I2C_3>;
-		status = "disabled";
-	};
-};
+#include "imx8-ss-dma.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
new file mode 100644
index 0000000..fda5fa7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+dma_subsys: bus@5a000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
+
+	/* SCU clocks */
+	dma_ipg_clk: clock-dma-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "dma_ipg_clk";
+	};
+
+	adc0_clk: clock-adc0 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_ADC_0>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "adc0_clk";
+	};
+
+	can0_clk: clock-can0 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_CAN_0>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "can0_clk";
+	};
+
+	ftm0_clk: clock-ftm0 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_FTM_0>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "ftm0_clk";
+	};
+
+	ftm1_clk: clock-ftm1 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_FTM_1>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "ftm1_clk";
+	};
+
+	i2c0_clk: clock-i2c0 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_I2C_0>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "i2c0_clk";
+	};
+
+	i2c1_clk: clock-i2c1 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_I2C_1>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "i2c1_clk";
+	};
+
+	i2c2_clk: clock-i2c2 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_I2C_2>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "i2c2_clk";
+	};
+
+	i2c3_clk: clock-i2c3 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_I2C_3>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "i2c3_clk";
+	};
+
+	lcd0_clk: clock-lcd0 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_LCD_0>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "lcd0_clk";
+	};
+
+	lcd0_pwm0_clk: clock-lcd0-pwm0 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_LCD_0_PWM_0>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "lcd0_pwm0_clk";
+	};
+
+	spi0_clk: clock-spi0 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_SPI_0>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "spi0_clk";
+	};
+
+	spi1_clk: clock-spi1 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_SPI_1>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "spi1_clk";
+	};
+
+	spi2_clk: clock-spi2 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_SPI_2>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "spi2_clk";
+	};
+
+	spi3_clk: clock-spi3 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_SPI_3>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "spi3_clk";
+	};
+
+	uart0_clk: clock-uart0 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_UART_0>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "uart0_clk";
+	};
+
+	uart1_clk: clock-uart1 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_UART_1>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "uart1_clk";
+	};
+
+	uart2_clk: clock-uart2 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_UART_2>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "uart2_clk";
+	};
+
+	uart3_clk: clock-uart3 {
+		#clock-cells = <0>;
+		rsrc-id = <IMX_SC_R_UART_3>;
+		clk-type = <IMX_SC_PM_CLK_PER>;
+		clock-output-names = "uart3_clk";
+	};
+
+	/* LPCG clocks */
+	uart0_lpcg: clock-controller@5a460000 {
+		reg = <0x5a460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&uart0_clk>, <&dma_ipg_clk>;
+		bit-offset = <0 16>;
+		clock-output-names = "uart0_lpcg_baud_clk",
+				     "uart0_lpcg_ipg_clk";
+	};
+
+	uart1_lpcg: clock-controller@5a470000 {
+		reg = <0x5a470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&uart1_clk>, <&dma_ipg_clk>;
+		bit-offset = <0 16>;
+		clock-output-names = "uart1_lpcg_baud_clk",
+				     "uart1_lpcg_ipg_clk";
+	};
+
+	uart2_lpcg: clock-controller@5a480000 {
+		reg = <0x5a480000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&uart2_clk>, <&dma_ipg_clk>;
+		bit-offset = <0 16>;
+		clock-output-names = "uart2_lpcg_baud_clk",
+				     "uart2_lpcg_ipg_clk";
+	};
+
+	uart3_lpcg: clock-controller@5a490000 {
+		reg = <0x5a490000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&uart3_clk>, <&dma_ipg_clk>;
+		bit-offset = <0 16>;
+		clock-output-names = "uart3_lpcg_baud_clk",
+				     "uart3_lpcg_ipg_clk";
+	};
+
+	i2c0_lpcg: clock-controller@5ac00000 {
+		reg = <0x5ac00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&i2c0_clk>, <&dma_ipg_clk>;
+		bit-offset = <0 16>;
+		clock-output-names = "i2c0_lpcg_clk",
+				     "i2c0_lpcg_ipg_clk";
+	};
+
+	i2c1_lpcg: clock-controller@5ac10000 {
+		reg = <0x5ac10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&i2c1_clk>, <&dma_ipg_clk>;
+		bit-offset = <0 16>;
+		clock-output-names = "i2c1_lpcg_clk",
+				     "i2c1_lpcg_ipg_clk";
+	};
+
+	i2c2_lpcg: clock-controller@5ac20000 {
+		reg = <0x5ac20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&i2c2_clk>, <&dma_ipg_clk>;
+		bit-offset = <0 16>;
+		clock-output-names = "i2c2_lpcg_clk",
+				     "i2c2_lpcg_ipg_clk";
+	};
+
+	i2c3_lpcg: clock-controller@5ac30000 {
+		reg = <0x5ac30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&i2c3_clk>, <&dma_ipg_clk>;
+		bit-offset = <0 16>;
+		clock-output-names = "i2c3_lpcg_clk",
+				     "i2c3_lpcg_ipg_clk";
+	};
+
+	dma_lpuart0: serial@5a060000 {
+		reg = <0x5a060000 0x1000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&uart0_lpcg 0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_UART_0>;
+		status = "disabled";
+	};
+
+	dma_i2c0: i2c@5a800000 {
+		reg = <0x5a800000 0x4000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&i2c0_lpcg 0>;
+		clock-names = "per";
+		assigned-clocks = <&i2c0_clk>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_0>;
+		status = "disabled";
+	};
+
+	dma_i2c1: i2c@5a810000 {
+		reg = <0x5a810000 0x4000>;
+		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&i2c1_lpcg 0>;
+		clock-names = "per";
+		assigned-clocks = <&i2c1_clk>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_1>;
+		status = "disabled";
+	};
+
+	dma_i2c2: i2c@5a820000 {
+		reg = <0x5a820000 0x4000>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&i2c2_lpcg 0>;
+		clock-names = "per";
+		assigned-clocks = <&i2c2_clk>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_2>;
+		status = "disabled";
+	};
+
+	dma_i2c3: i2c@5a830000 {
+		reg = <0x5a830000 0x4000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&i2c3_lpcg 0>;
+		clock-names = "per";
+		assigned-clocks = <&i2c3_clk>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_3>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 03aad66..1f9c2f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -12,7 +12,7 @@
 	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
 
 	chosen {
-		stdout-path = &adma_lpuart0;
+		stdout-path = &dma_lpuart0;
 	};
 
 	memory@80000000 {
@@ -30,7 +30,7 @@
 	};
 };
 
-&adma_lpuart0 {
+&dma_lpuart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart0>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
index 2368e52..67b8807 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
@@ -108,22 +108,22 @@
 	compatible = "fsl,imx8qxp-lpcg";
 };
 
-&adma_lpuart0 {
+&dma_lpuart0 {
 	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 };
 
-&adma_i2c0 {
+&dma_i2c0 {
 	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 };
 
-&adma_i2c1 {
+&dma_i2c1 {
 	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 };
 
-&adma_i2c2 {
+&dma_i2c2 {
 	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 };
 
-&adma_i2c3 {
+&dma_i2c3 {
 	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 589483a..161f6c0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -20,7 +20,7 @@
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
-		serial0 = &adma_lpuart0;
+		serial0 = &dma_lpuart0;
 	};
 
 	cpus {
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel