From: Amit Daniel Kachhap <amit.kachhap@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Andrew Jones <drjones@redhat.com>,
Julien Thierry <julien.thierry@arm.com>,
Marc Zyngier <marc.zyngier@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Christoffer Dall <christoffer.dall@arm.com>,
Kristina Martsenko <kristina.martsenko@arm.com>,
kvmarm@lists.cs.columbia.edu, James Morse <james.morse@arm.com>,
Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>,
Amit Daniel Kachhap <amit.kachhap@arm.com>,
Dave Martin <Dave.Martin@arm.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 3/10] KVM: arm64: Move hyp_symbol_addr to fix dependency
Date: Tue, 19 Mar 2019 14:00:36 +0530 [thread overview]
Message-ID: <1552984243-7689-4-git-send-email-amit.kachhap@arm.com> (raw)
In-Reply-To: <1552984243-7689-1-git-send-email-amit.kachhap@arm.com>
Currently hyp_symbol_addr is palced in kvm_mmu.h which is mostly
used by __hyp_this_cpu_ptr in kvm_asm.h but it cannot include
kvm_mmu.h directly as kvm_mmu.h uses kvm_ksym_ref which is
defined inside kvm_asm.h. Hence, hyp_symbol_addr is moved inside
kvm_asm.h to fix this dependency on each other.
Also kvm_ksym_ref is corresponding counterpart of hyp_symbol_addr
so should be ideally placed inside kvm_asm.h.
Suggested by: James Morse <james.morse@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
arch/arm64/include/asm/kvm_asm.h | 20 ++++++++++++++++++++
arch/arm64/include/asm/kvm_mmu.h | 20 --------------------
2 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index f5b79e9..57a07e8 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -80,6 +80,26 @@ extern void __vgic_v3_init_lrs(void);
extern u32 __kvm_get_mdcr_el2(void);
+/*
+ * Obtain the PC-relative address of a kernel symbol
+ * s: symbol
+ *
+ * The goal of this macro is to return a symbol's address based on a
+ * PC-relative computation, as opposed to a loading the VA from a
+ * constant pool or something similar. This works well for HYP, as an
+ * absolute VA is guaranteed to be wrong. Only use this if trying to
+ * obtain the address of a symbol (i.e. not something you obtained by
+ * following a pointer).
+ */
+#define hyp_symbol_addr(s) \
+ ({ \
+ typeof(s) *addr; \
+ asm("adrp %0, %1\n" \
+ "add %0, %0, :lo12:%1\n" \
+ : "=r" (addr) : "S" (&s)); \
+ addr; \
+ })
+
/* Home-grown __this_cpu_{ptr,read} variants that always work at HYP */
#define __hyp_this_cpu_ptr(sym) \
({ \
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index b0742a1..3dea6af 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -118,26 +118,6 @@ static inline unsigned long __kern_hyp_va(unsigned long v)
#define kern_hyp_va(v) ((typeof(v))(__kern_hyp_va((unsigned long)(v))))
/*
- * Obtain the PC-relative address of a kernel symbol
- * s: symbol
- *
- * The goal of this macro is to return a symbol's address based on a
- * PC-relative computation, as opposed to a loading the VA from a
- * constant pool or something similar. This works well for HYP, as an
- * absolute VA is guaranteed to be wrong. Only use this if trying to
- * obtain the address of a symbol (i.e. not something you obtained by
- * following a pointer).
- */
-#define hyp_symbol_addr(s) \
- ({ \
- typeof(s) *addr; \
- asm("adrp %0, %1\n" \
- "add %0, %0, :lo12:%1\n" \
- : "=r" (addr) : "S" (&s)); \
- addr; \
- })
-
-/*
* We currently support using a VM-specified IPA size. For backward
* compatibility, the default IPA size is fixed to 40bits.
*/
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-19 8:32 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-19 8:30 [PATCH v7 0/10] Add ARMv8.3 pointer authentication for kvm guest Amit Daniel Kachhap
2019-03-19 8:30 ` [PATCH v7 1/10] KVM: arm64: Propagate vcpu into read_id_reg() Amit Daniel Kachhap
2019-03-19 8:30 ` [PATCH v7 2/10] KVM: arm64: Support runtime sysreg visibility filtering Amit Daniel Kachhap
2019-03-19 8:30 ` Amit Daniel Kachhap [this message]
2019-03-20 8:49 ` [PATCH v7 3/10] KVM: arm64: Move hyp_symbol_addr to fix dependency Julien Thierry
2019-03-21 5:29 ` Amit Daniel Kachhap
2019-03-19 8:30 ` [PATCH v7 4/10] KVM: arm/arm64: preserve host HCR_EL2 value Amit Daniel Kachhap
2019-03-19 8:30 ` [PATCH v7 5/10] KVM: arm/arm64: preserve host MDCR_EL2 value Amit Daniel Kachhap
2019-03-25 20:04 ` Kristina Martsenko
2019-03-26 3:55 ` Amit Daniel Kachhap
2019-03-19 8:30 ` [PATCH v7 6/10] KVM: arm64: Add vcpu feature flags to control ptrauth accessibility Amit Daniel Kachhap
2019-03-19 8:30 ` [PATCH v7 7/10] KVM: arm/arm64: context-switch ptrauth registers Amit Daniel Kachhap
2019-03-20 12:13 ` Julien Thierry
2019-03-21 6:08 ` Amit Daniel Kachhap
2019-03-21 8:29 ` Julien Thierry
2019-03-25 20:04 ` Kristina Martsenko
2019-03-26 4:03 ` Amit Daniel Kachhap
2019-03-26 18:01 ` Kristina Martsenko
2019-03-27 3:21 ` Amit Daniel Kachhap
2019-03-27 18:16 ` James Morse
2019-03-28 11:29 ` Amit Daniel Kachhap
2019-03-28 18:51 ` James Morse
2019-03-29 5:54 ` Amit Daniel Kachhap
2019-03-19 8:30 ` [PATCH v7 8/10] KVM: arm64: Add capability to advertise ptrauth for guest Amit Daniel Kachhap
2019-03-25 20:05 ` Kristina Martsenko
2019-03-26 4:12 ` Amit Daniel Kachhap
2019-03-19 8:30 ` [PATCH v7 9/10] KVM: arm64: docs: document KVM support of pointer authentication Amit Daniel Kachhap
2019-03-20 13:37 ` Julien Thierry
2019-03-20 15:04 ` Kristina Martsenko
2019-03-20 18:06 ` Julien Thierry
2019-03-20 20:56 ` Kristina Martsenko
2019-03-21 6:41 ` Amit Daniel Kachhap
2019-03-25 20:05 ` Kristina Martsenko
2019-03-27 10:44 ` Dave Martin
2019-03-27 11:49 ` Amit Daniel Kachhap
2019-03-27 13:50 ` Dave Martin
2019-03-28 10:13 ` Amit Daniel Kachhap
2019-03-19 8:30 ` [kvmtool PATCH v7 10/10] KVM: arm/arm64: Add a vcpu feature for " Amit Daniel Kachhap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1552984243-7689-4-git-send-email-amit.kachhap@arm.com \
--to=amit.kachhap@arm.com \
--cc=Dave.Martin@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=drjones@redhat.com \
--cc=james.morse@arm.com \
--cc=julien.thierry@arm.com \
--cc=kristina.martsenko@arm.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=ramana.radhakrishnan@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).