Re: [PATCH v2] gpu/drm: mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable()

[CK Hu <ck.hu@mediatek.com>]

Hi, Hsin-yi:

On Thu, 2019-03-21 at 09:28 +0800, CK Hu wrote:
> Hi, Hsin-yi:
> 
> On Wed, 2019-03-20 at 15:18 +0800, Hsin-Yi Wang wrote:
> > mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), which needs
> > ovl irq for drm_crtc_wait_one_vblank(), since after mtk_dsi_stop() is called,
> > ovl irq will be disabled. If drm_crtc_wait_one_vblank() is called after last
> > irq, it will timeout with this message: "vblank wait timed out on crtc 0". This
> > happens sometimes when turning off the screen.
> > 
> > In drm_atomic_helper.c#disable_outputs(),
> > the calling sequence when turning off the screen is:
> > 
> > 1. mtk_dsi_encoder_disable()
> >      --> mtk_output_dsi_disable()
> >        --> mtk_dsi_stop();  // sometimes make vblank timeout in atomic_disable
> >        --> mtk_dsi_poweroff();
> > 2. mtk_drm_crtc_atomic_disable()
> >      --> drm_crtc_wait_one_vblank();
> >      ...
> >        --> mtk_dsi_ddp_stop()
> >          --> mtk_dsi_poweroff();
> > 
> > mtk_dsi_poweroff() has reference count design, change to make mtk_dsi_stop()
> > called in mtk_dsi_poweroff() when refcount is 0.
> > 
> > Fixes: 0707632b5bac ("drm/mediatek: update DSI sub driver flow for sending commands to panel")
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > ---
> > change log:
> > v1->v2:
> >  * update commit message.
> >  * call mtk_dsi_stop() in mtk_dsi_poweroff() when refcount is 0.
> > ---
> >  drivers/gpu/drm/mediatek/mtk_dsi.c | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > index b00eb2d2e086..e152f37af57d 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > @@ -630,6 +630,8 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
> >  	if (--dsi->refcount != 0)
> >  		return;
> >  
> > +	mtk_dsi_stop(dsi);
> > +
> >  	if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
> >  		if (dsi->panel) {
> >  			if (drm_panel_unprepare(dsi->panel)) {
> 
> I think you just move mtk_dsi_stop() into mtk_dsi_poweroff() would works
> fine, but I would rather like calling mtk_dsi_start() and mtk_dsi_stop()
> in a symmetric manner. That means you may also move below functions into
> mtk_dsi_poweron():
> 
> mtk_dsi_set_mode(dsi);
> mtk_dsi_clk_hs_mode(dsi, 1);
> mtk_dsi_start(dsi);
> 
> 
> > @@ -696,7 +698,6 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
> >  		}
> >  	}
> >  
> > -	mtk_dsi_stop(dsi);
> >  	mtk_dsi_poweroff(dsi);
> >  
> >  	dsi->enabled = false;
> > @@ -1178,6 +1179,8 @@ static int mtk_dsi_remove(struct platform_device *pdev)
> >  	struct mtk_dsi *dsi = platform_get_drvdata(pdev);
> >  
> >  	mtk_output_dsi_disable(dsi);
> > +	mtk_dsi_stop(dsi);
> > +	mtk_dsi_poweroff(dsi);
> 
> I think mtk_output_dsi_disable() would call mtk_dsi_poweroff(), and
> mtk_dsi_poweroff() would call mtk_dsi_stop(), so these two line are
> redundant. And I think you should remove mtk_dsi_stop() in
> mtk_output_dsi_disable(), why not in this patch?

You've removed mtk_dsi_stop() in mtk_output_dsi_disable(), I just miss
it, sorry for this.

Regards,
CK

> 
> Regards,
> CK
> 
> >  	component_del(&pdev->dev, &mtk_dsi_component_ops);
> >  
> >  	return 0;
> 



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel