* [PATCH 1/2] ARM: dts: rockchip: use pin constants to describe gpios
2016-10-22 12:51 [PATCH 0/2] Use macros to describe gpios on rockchip platform Andy Yan
@ 2016-10-22 12:54 ` Andy Yan
2016-10-22 12:59 ` [PATCH 2/2] ARM64: " Andy Yan
2016-12-30 12:31 ` [PATCH 0/2] Use macros to describe gpios on rockchip platform Heiko Stuebner
2 siblings, 0 replies; 4+ messages in thread
From: Andy Yan @ 2016-10-22 12:54 UTC (permalink / raw)
To: linux-arm-kernel
Use macros to describe gpios will make the dts easier to
read and write.
All the modifications done with sed:
sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
.......
.......
sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
Tested with:
for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
arch/arm/boot/dts/rk3036-evb.dts | 2 +-
arch/arm/boot/dts/rk3036-kylin.dts | 10 +++++-----
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 6 +++---
arch/arm/boot/dts/rk3066a-marsboard.dts | 2 +-
arch/arm/boot/dts/rk3066a-mk808.dts | 10 +++++-----
arch/arm/boot/dts/rk3066a-rayeager.dts | 12 ++++++------
arch/arm/boot/dts/rk3188-px3-evb.dts | 4 ++--
arch/arm/boot/dts/rk3188-radxarock.dts | 16 +++++++--------
arch/arm/boot/dts/rk3229-evb.dts | 2 +-
arch/arm/boot/dts/rk3288-evb-act8846.dts | 4 ++--
arch/arm/boot/dts/rk3288-evb.dtsi | 14 ++++++-------
arch/arm/boot/dts/rk3288-fennec.dts | 4 ++--
arch/arm/boot/dts/rk3288-firefly-beta.dts | 2 +-
arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 2 +-
arch/arm/boot/dts/rk3288-firefly-reload.dts | 24 +++++++++++------------
arch/arm/boot/dts/rk3288-firefly.dts | 2 +-
arch/arm/boot/dts/rk3288-firefly.dtsi | 16 +++++++--------
arch/arm/boot/dts/rk3288-miqi.dts | 8 ++++----
arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
arch/arm/boot/dts/rk3288-r89.dts | 12 ++++++------
arch/arm/boot/dts/rk3288-rock2-som.dtsi | 4 ++--
arch/arm/boot/dts/rk3288-rock2-square.dts | 12 ++++++------
arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi | 4 ++--
arch/arm/boot/dts/rk3288-veyron-brain.dts | 8 ++++----
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 10 +++++-----
arch/arm/boot/dts/rk3288-veyron-jaq.dts | 14 ++++++-------
arch/arm/boot/dts/rk3288-veyron-jerry.dts | 10 +++++-----
arch/arm/boot/dts/rk3288-veyron-mickey.dts | 6 +++---
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 16 +++++++--------
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 4 ++--
arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi | 2 +-
arch/arm/boot/dts/rk3288-veyron-speedy.dts | 10 +++++-----
arch/arm/boot/dts/rk3288-veyron.dtsi | 8 ++++----
33 files changed, 131 insertions(+), 131 deletions(-)
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 2f5f155..c095341 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -56,7 +56,7 @@
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
phy = <&phy0>;
- phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+ phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-duration = <10>; /* millisecond */
status = "okay";
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 3de958e..2518259 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -55,7 +55,7 @@
compatible = "gpio-leds";
work {
- gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
label = "kylin:red:led";
pinctrl-names = "default";
pinctrl-0 = <&led_ctl>;
@@ -74,9 +74,9 @@
* - SDIO_RESET_L_WL_RST
* - SDIO_RESET_L_BT_EN
*/
- reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
- <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
- <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */
+ reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+ <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */
+ <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */
};
sound {
@@ -121,7 +121,7 @@
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
phy = <&phy0>;
- phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+ phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-duration = <10>; /* millisecond */
status = "okay";
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index c0d8b54..9e852c6 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -71,7 +71,7 @@
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@@ -81,7 +81,7 @@
autorepeat;
power {
- gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+ gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@@ -89,7 +89,7 @@
debounce-interval = <100>;
};
volume-down {
- gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+ gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
linux,code = <KEY_VOLUMEDOWN>;
label = "GPIO Key Vol-";
linux,input-type = <1>;
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index 0a54c4b..cdf0a88 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -69,7 +69,7 @@
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index 658eb7d..7ca1cf5 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -61,7 +61,7 @@
blue {
label = "mk808:blue:power";
- gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "default-on";
};
@@ -77,7 +77,7 @@
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&host_drv>;
pinctrl-names = "default";
regulator-always-on;
@@ -91,7 +91,7 @@
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&otg_drv>;
pinctrl-names = "default";
regulator-always-on;
@@ -104,7 +104,7 @@
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sdmmc_pwr>;
pinctrl-names = "default";
regulator-name = "vcc_sd";
@@ -117,7 +117,7 @@
vcc_wifi: sdio-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&wifi_pwr>;
pinctrl-names = "default";
regulator-name = "vcc_wifi";
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 82465b6..7c05e8b 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -55,7 +55,7 @@
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@@ -65,7 +65,7 @@
power {
wakeup-source;
- gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
@@ -115,7 +115,7 @@
vcc_sata: sata-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sata_pwr>;
regulator-name = "usb_5v";
@@ -127,7 +127,7 @@
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -140,7 +140,7 @@
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_drv>;
regulator-name = "host-pwr";
@@ -153,7 +153,7 @@
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_drv>;
regulator-name = "vcc_otg";
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index df727ba..4afd9d8 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -62,7 +62,7 @@
autorepeat;
power {
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@@ -248,7 +248,7 @@
reg = <0x40>;
interrupt-parent = <&gpio1>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
- power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
silead,max-fingers = <5>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 5e8a235..28a2931 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -58,7 +58,7 @@
autorepeat;
power {
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@@ -72,19 +72,19 @@
green {
label = "rock:green:user1";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
blue {
label = "rock:blue:user2";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
sleep {
label = "rock:red:power";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
@@ -106,7 +106,7 @@
ir_recv: gpio-ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio0 10 1>;
+ gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_recv_pin>;
};
@@ -114,7 +114,7 @@
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "otg-vbus";
@@ -129,7 +129,7 @@
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@@ -137,7 +137,7 @@
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "host-pwr";
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index dcdd0ce..275092a 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -77,7 +77,7 @@
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
tx_delay = <0x30>;
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 041dd5d..f4f29fe 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -47,7 +47,7 @@
vcc_lcd: vcc-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
regulator-name = "vcc_lcd";
@@ -57,7 +57,7 @@
vcc_wl: vcc-wl {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwr>;
regulator-name = "vcc_wl";
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index bf7ccfa..0dec94c 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -84,7 +84,7 @@
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <128>;
- enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
@@ -100,7 +100,7 @@
panel: panel {
compatible ="lg,lp079qx1-sp0v", "simple-panel";
backlight = <&backlight>;
- enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&lcd_cs>;
ports {
@@ -120,7 +120,7 @@
pinctrl-0 = <&pwrbtn>;
power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@@ -133,7 +133,7 @@
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -144,7 +144,7 @@
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <ð_phy_pwr>;
regulator-name = "vcc_phy";
@@ -170,7 +170,7 @@
*/
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -236,7 +236,7 @@
phy-supply = <&vcc_phy>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts
index 805c0d2..dc00f12 100644
--- a/arch/arm/boot/dts/rk3288-fennec.dts
+++ b/arch/arm/boot/dts/rk3288-fennec.dts
@@ -93,7 +93,7 @@
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "okay";
@@ -345,7 +345,7 @@
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&host_drv>;
- vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts
index 75d77e3..0195d97 100644
--- a/arch/arm/boot/dts/rk3288-firefly-beta.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts
@@ -49,7 +49,7 @@
};
&ir {
- gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
};
&pinctrl {
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
index d242588..8134966 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -96,7 +96,7 @@
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 751bee8..d28c8c3 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -53,7 +53,7 @@
power {
wakeup-source;
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
@@ -63,14 +63,14 @@
ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
};
leds {
compatible = "gpio-leds";
power {
- gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:blue:power";
pinctrl-names = "default";
pinctrl-0 = <&power_led>;
@@ -78,7 +78,7 @@
};
work {
- gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
@@ -92,7 +92,7 @@
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>;
- reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
sound {
@@ -112,7 +112,7 @@
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
@@ -133,7 +133,7 @@
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -146,7 +146,7 @@
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
@@ -159,7 +159,7 @@
dovdd_1v8: dovdd-1v8-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "dovdd_1v8";
@@ -171,7 +171,7 @@
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
@@ -183,7 +183,7 @@
af_28: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "af_28";
@@ -195,7 +195,7 @@
dvdd_1v2: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cif_pwr>;
regulator-name = "dvdd_1v2";
diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts
index c07fe92..14271be 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dts
+++ b/arch/arm/boot/dts/rk3288-firefly.dts
@@ -49,7 +49,7 @@
};
&ir {
- gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
};
&pinctrl {
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 44935af..e4dd758 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -75,7 +75,7 @@
power {
wakeup-source;
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
@@ -87,7 +87,7 @@
compatible = "gpio-leds";
work {
- gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
@@ -95,7 +95,7 @@
};
power {
- gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:green:power";
linux,default-trigger = "default-on";
pinctrl-names = "default";
@@ -114,7 +114,7 @@
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -145,7 +145,7 @@
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
@@ -158,7 +158,7 @@
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
@@ -175,7 +175,7 @@
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
@@ -213,7 +213,7 @@
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 441d450..21326f3 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -68,7 +68,7 @@
compatible = "gpio-leds";
work {
- gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>;
label = "miqi:green:user";
linux,default-trigger = "default-on";
pinctrl-names = "default";
@@ -87,7 +87,7 @@
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -99,7 +99,7 @@
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -146,7 +146,7 @@
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index bc6d100..e0b5e84 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -180,7 +180,7 @@
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio4 RK_PB0 0>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 04faa72..54a0fc0 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -68,7 +68,7 @@
pinctrl-0 = <&pwrbtn>;
power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@@ -79,7 +79,7 @@
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@@ -87,7 +87,7 @@
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -98,7 +98,7 @@
vcc_otg: vcc-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg";
@@ -111,7 +111,7 @@
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@@ -134,7 +134,7 @@
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index b25ba80..1c0bbc9 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -51,7 +51,7 @@
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
- reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
};
ext_gmac: external-gmac-clock {
@@ -106,7 +106,7 @@
phy-supply = <&vccio_pmu>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins &phy_rst>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
rx_delay = <0x10>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index dd3ad2e..6cc83fe 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -53,13 +53,13 @@
compatible = "gpio-leds";
heartbeat {
- gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>;
label = "rock2:green:state1";
linux,default-trigger = "heartbeat";
};
mmc {
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
label = "rock2:blue:state2";
linux,default-trigger = "mmc0";
};
@@ -67,7 +67,7 @@
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@@ -92,13 +92,13 @@
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>;
- reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
vcc_usb_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
/* Always on as the rockchip usb phy doesn't have a vbus-supply
@@ -110,7 +110,7 @@
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
index 6d105914..f8c5a47 100644
--- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
@@ -17,8 +17,8 @@
rockchip,model = "VEYRON-I2S";
rockchip,i2s-controller = <&i2s>;
rockchip,audio-codec = <&max98090>;
- rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
- rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>;
+ rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>;
rockchip,headset-codec = <&headsetcodec>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
index cf5311d..ed42552 100644
--- a/arch/arm/boot/dts/rk3288-veyron-brain.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -67,7 +67,7 @@
vcc5_host2: vcc5-host2-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_pwr_en>;
regulator-name = "vcc5_host2";
@@ -103,8 +103,8 @@
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
- dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
- <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>,
+ <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply;
@@ -133,7 +133,7 @@
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index ce1f879..9e882f3 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -91,7 +91,7 @@
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <128>;
- enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
backlight-boot-off;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
@@ -102,7 +102,7 @@
gpio-charger {
compatible = "gpio-charger";
charger-type = "mains";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&ac_present_ap>;
};
@@ -142,7 +142,7 @@
vcc5_host1: vcc5-host1-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host1_pwr_en>;
regulator-name = "vcc5_host1";
@@ -154,7 +154,7 @@
vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usbotg_pwren_h>;
regulator-name = "vcc5_host2";
@@ -190,7 +190,7 @@
pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
lid {
label = "Lid";
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <0>; /* SW_LID */
linux,input-type = <5>; /* EV_SW */
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index 3748abf..d33f576 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -57,7 +57,7 @@
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
@@ -68,7 +68,7 @@
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
@@ -80,7 +80,7 @@
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
@@ -134,8 +134,8 @@
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
- dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
- <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+ <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
regulators {
mic_vcc: LDO_REG2 {
@@ -160,14 +160,14 @@
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index f6b2eaa..6107f76 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -56,7 +56,7 @@
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
@@ -67,7 +67,7 @@
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
@@ -79,7 +79,7 @@
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
@@ -123,14 +123,14 @@
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index f36f6f4..f0994f0 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -182,8 +182,8 @@
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
- dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
- <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+ <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply;
/delete-property/ vcc12-supply;
@@ -244,7 +244,7 @@
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&power_hdmi_on>;
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index f72d616d..53c7205 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -55,7 +55,7 @@
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
@@ -66,7 +66,7 @@
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
@@ -77,7 +77,7 @@
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
@@ -134,14 +134,14 @@
volum_down {
label = "Volum_down";
- gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
};
volum_up {
label = "Volum_up";
- gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <100>;
};
@@ -168,7 +168,7 @@
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touch_int &touch_rst>;
- reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
vcc33-supply = <&vcc33_touch>;
vccio-supply = <&vcc33_touch>;
};
@@ -211,14 +211,14 @@
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index d44351e..995cff4 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -76,7 +76,7 @@
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
power {
- gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
@@ -126,7 +126,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
&sdmmc_wp_gpio &sdmmc_bus4>;
- wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
};
&tsadc {
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
index fec076e..aef0710 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -115,7 +115,7 @@
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
- cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
rockchip,default-sample-phase = <90>;
num-slots = <1>;
sd-uhs-sdr12;
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index a0d033f..cc0b78c 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -57,7 +57,7 @@
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
@@ -68,7 +68,7 @@
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
@@ -80,7 +80,7 @@
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
@@ -126,14 +126,14 @@
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 2251d28..e2ecd57 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -61,7 +61,7 @@
pinctrl-0 = <&pwr_key_l>;
power {
label = "Power";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
debounce-interval = <100>;
wakeup-source;
@@ -70,7 +70,7 @@
gpio-restart {
compatible = "gpio-restart";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&ap_warm_reset_h>;
priority = <200>;
@@ -80,7 +80,7 @@
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
- reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -96,7 +96,7 @@
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
- reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
vcc_5v: vcc-5v {
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] ARM64: dts: rockchip: use pin constants to describe gpios
2016-10-22 12:51 [PATCH 0/2] Use macros to describe gpios on rockchip platform Andy Yan
2016-10-22 12:54 ` [PATCH 1/2] ARM: dts: rockchip: use pin constants to describe gpios Andy Yan
@ 2016-10-22 12:59 ` Andy Yan
2016-12-30 12:31 ` [PATCH 0/2] Use macros to describe gpios on rockchip platform Heiko Stuebner
2 siblings, 0 replies; 4+ messages in thread
From: Andy Yan @ 2016-10-22 12:59 UTC (permalink / raw)
To: linux-arm-kernel
Use macros to describe gpios will make the dts easier to
read and write.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi | 10 +++++-----
arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts | 8 ++++----
arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts | 14 +++++++-------
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 4 ++--
arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 16 ++++++++--------
arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 6 +++---
6 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index fff8b19..4772917 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -90,7 +90,7 @@
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <128>;
- enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
@@ -101,7 +101,7 @@
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
- reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
};
keys: gpio-keys {
@@ -111,7 +111,7 @@
power {
wakeup-source;
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
};
@@ -121,7 +121,7 @@
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -166,7 +166,7 @@
phy-supply = <&vcc_lan>;
phy-mode = "rmii";
clock_in_out = "output";
- snps,reset-gpio = <&gpio3 12 0>;
+ snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index e5eeca2..e5b92d2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -66,7 +66,7 @@
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@@ -77,7 +77,7 @@
pinctrl-0 = <&pwr_key>;
power {
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
wakeup-source;
@@ -88,13 +88,13 @@
compatible = "gpio-leds";
blue {
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
label = "geekbox:blue:led";
default-state = "on";
};
red {
- gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
label = "geekbox:red:led";
default-state = "off";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index ea0a8ec..2e431f13 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -61,7 +61,7 @@
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
- reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
};
ext_gmac: external-gmac-clock {
@@ -78,7 +78,7 @@
power {
wakeup-source;
- gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
};
@@ -88,7 +88,7 @@
compatible = "gpio-leds";
red {
- gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
label = "orion:red:led";
pinctrl-names = "default";
pinctrl-0 = <&led_ctl>;
@@ -96,7 +96,7 @@
};
blue {
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
label = "orion:blue:led";
pinctrl-names = "default";
pinctrl-0 = <&stby_pwren>;
@@ -117,7 +117,7 @@
/* supplies both host and otg */
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -149,7 +149,7 @@
vcc_sd: vcc-sd-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sd";
- gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_io>;
@@ -217,7 +217,7 @@
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 12 0>;
+ snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
tx_delay = <0x30>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 85f7a24..62919c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -63,7 +63,7 @@
pinctrl-0 = <&pwr_key>;
power {
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
wakeup-source;
@@ -248,7 +248,7 @@
reg = <0x40>;
interrupt-parent = <&gpio3>;
interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
- power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
silead,max-fingers = <5>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index eed1ef6..7134181 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -61,7 +61,7 @@
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
- reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
};
keys: gpio-keys {
@@ -71,7 +71,7 @@
power {
wakeup-source;
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
};
@@ -81,7 +81,7 @@
compatible = "gpio-leds";
work {
- gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
label = "r88:green:led";
pinctrl-names = "default";
pinctrl-0 = <&led_ctl>;
@@ -90,7 +90,7 @@
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@@ -104,10 +104,10 @@
reset-gpios =
/* BT_RST_N */
- <&gpio3 5 GPIO_ACTIVE_LOW>,
+ <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>,
/* WL_REG_ON */
- <&gpio3 4 GPIO_ACTIVE_LOW>;
+ <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
};
vcc_18: vcc18-regulator {
@@ -124,7 +124,7 @@
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -199,7 +199,7 @@
phy-supply = <&vcc_lan>;
phy-mode = "rmii";
clock_in_out = "output";
- snps,reset-gpio = <&gpio3 12 0>;
+ snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 8e82497..f00e0d5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -88,7 +88,7 @@
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
@@ -123,7 +123,7 @@
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
tx_delay = <0x28>;
@@ -156,7 +156,7 @@
};
&pcie0 {
- ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn>;
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread