[PATCH/RFC 4/4] soc: renesas: Identify SoC and register with the SoC bus

[arnd@arndb.de (Arnd Bergmann)]

On Tuesday, October 4, 2016 11:09:27 AM CEST Geert Uytterhoeven wrote:
> Identify the SoC type and revision, and register this information with
> the SoC bus, so it is available under /sys/devices/soc0/, and can be
> checked where needed using soc_device_match().
> 
> In addition, on SoCs that support it, the product ID is read from a
> hardware register and validated, to catch accidental use of a DTB for a
> different SoC.
> 
> Example:
> 
>     Detected Renesas r8a7791 ES1.0
>     ...
>     # cat /sys/devices/soc0/{family,machine,soc_id,revision}
>     R-Car Gen2
>     Koelsch
>     r8a7791
>     ES1.0
> 

Seems all reasonable.

> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> This patch does NOT add a call to
> 
>         of_platform_default_populate(NULL, NULL,
>                                      soc_device_to_device(soc_dev));
> 
> Contrary to suggested by commit 74d1d82cdaaec727 ("drivers/base: add bus
> for System-on-Chip devices), doing so would not only move on-SoC devices
> from /sys/devices/platform/ to /sys/devices/soc0/, but also all other
> board (off-SoC) devices specified in the DTB.

Right, we have moved away from that a while ago, and now just
use the device for identification, not to model the device
hierarchy.

> diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
> new file mode 100644
> index 0000000000000000..74b72e4112b8889e
> --- /dev/null
> +++ b/drivers/soc/renesas/renesas-soc.c
> @@ -0,0 +1,266 @@
> +/*
> + * Renesas SoC Identification
> + *
> + * Copyright (C) 2014-2016 Glider bvba
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/sys_soc.h>
> +
> +
> +struct renesas_family {
> +	const char name[16];
> +	u32 reg;			/* CCCR, PVR, or PRR */
> +};
> +
> +static const struct renesas_family fam_emev2 __initconst = {
> +	.name	= "Emma Mobile EV2",
> +};

As this is not related to the others and doesn't have the respective
register, I'd leave the platform out of this, and possibly have
a separate driver for it.

> +static const struct renesas_family fam_rza __initconst = {
> +	.name	= "RZ/A",
> +};

I'm not sure about the relationship between this one and the others,
maybe it should be treated in the same way as emev2 and left out from
this driver?

> +static const struct renesas_family fam_rmobile __initconst = {
> +	.name	= "R-Mobile",
> +	.reg	= 0xe600101c,		/* CCCR (Common Chip Code Register) */
> +};
> +
> +static const struct renesas_family fam_rcar_gen1 __initconst = {
> +	.name	= "R-Car Gen1",
> +	.reg	= 0xff000044,		/* PRR (Product Register) */
> +};
> +
> +static const struct renesas_family fam_rcar_gen2 __initconst = {
> +	.name	= "R-Car Gen2",
> +	.reg	= 0xff000044,		/* PRR (Product Register) */
> +};
> +
> +static const struct renesas_family fam_rcar_gen3 __initconst = {
> +	.name	= "R-Car Gen3",
> +	.reg	= 0xfff00044,		/* PRR (Product Register) */
> +};
> +
> +static const struct renesas_family fam_rzg __initconst = {
> +	.name	= "RZ/G",
> +	.reg	= 0xff000044,		/* PRR (Product Register) */
> +};
> +
> +static const struct renesas_family fam_shmobile __initconst = {
> +	.name	= "SH-Mobile",
> +	.reg	= 0xe600101c,		/* CCCR (Common Chip Code Register) */
> +};

These seem to fall into two distinct categories, maybe there is a
better way to group them. What device contain the two kinds of
registers (PRR, CCCR)?

Hardcoding the register address seems rather ugly here, so maybe
there is a way to have two separate probe methods based on the
surrounding register range, and then bind to that?

> +static const struct of_device_id renesas_socs[] __initconst = {
> +#ifdef CONFIG_ARCH_EMEV2
> +	{ .compatible = "renesas,emev2",	.data = &soc_emev2 },
> +#endif
> +#ifdef CONFIG_ARCH_R7S72100
> +	{ .compatible = "renesas,r7s72100",	.data = &soc_rz_a1h },
> +#endif
> +#ifdef CONFIG_ARCH_R8A73A4

I think the #ifdefs here will result in warnings for unused symbols 
when the Kconfig symbols are disabled.

	Arnd