From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/7] clk: samsung: add plls used by the s3c2443
Date: Tue, 31 Dec 2013 21:03:16 +0100 [thread overview]
Message-ID: <1561704.n1QFeDVIXH@phil> (raw)
In-Reply-To: <20131223200755.25490.91898@quantum>
Hi Mike,
Am Montag, 23. Dezember 2013, 12:07:55 schrieb Mike Turquette:
> Quoting Heiko St?bner (2013-12-10 07:15:38)
>
> > The s3c2443 uses different plls that are not present yet. Therefore
> > add the two needed types.
> >
> > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> > Acked-by: Tomasz Figa <t.figa@samsung.com>
>
> Acked-by: Mike Turquette <mturquette@linaro.org>
did you also take a look at the real clock driver too in
"[4/7] clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450"
because it looks like didn't get any response so far from you
(and I just saw you acking the later s3c2410 driver)
Thanks
Heiko
>
> > ---
> >
> > drivers/clk/samsung/clk-pll.c | 72
> > +++++++++++++++++++++++++++++++++++++++++ drivers/clk/samsung/clk-pll.h
> > | 2 ++
> > 2 files changed, 74 insertions(+)
> >
> > diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
> > index c37d033..461a6bf 100644
> > --- a/drivers/clk/samsung/clk-pll.c
> > +++ b/drivers/clk/samsung/clk-pll.c
> > @@ -59,6 +59,72 @@ static long samsung_pll_round_rate(struct clk_hw *hw,
> >
> > }
> >
> > /*
> >
> > + * PLL2126 Clock Type
> > + */
> > +
> > +#define PLL2126_MDIV_MASK (0xff)
> > +#define PLL2126_PDIV_MASK (0x3f)
> > +#define PLL2126_SDIV_MASK (0x3)
> > +#define PLL2126_MDIV_SHIFT (16)
> > +#define PLL2126_PDIV_SHIFT (8)
> > +#define PLL2126_SDIV_SHIFT (0)
> > +
> > +static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate)
> > +{
> > + struct samsung_clk_pll *pll = to_clk_pll(hw);
> > + u32 pll_con, mdiv, pdiv, sdiv;
> > + u64 fvco = parent_rate;
> > +
> > + pll_con = __raw_readl(pll->con_reg);
> > + mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK;
> > + pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK;
> > + sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK;
> > +
> > + fvco *= (mdiv + 8);
> > + do_div(fvco, (pdiv + 2) << sdiv);
> > +
> > + return (unsigned long)fvco;
> > +}
> > +
> > +static const struct clk_ops samsung_pll2126_clk_ops = {
> > + .recalc_rate = samsung_pll2126_recalc_rate,
> > +};
> > +
> > +/*
> > + * PLL3000 Clock Type
> > + */
> > +
> > +#define PLL3000_MDIV_MASK (0xff)
> > +#define PLL3000_PDIV_MASK (0x3)
> > +#define PLL3000_SDIV_MASK (0x3)
> > +#define PLL3000_MDIV_SHIFT (16)
> > +#define PLL3000_PDIV_SHIFT (8)
> > +#define PLL3000_SDIV_SHIFT (0)
> > +
> > +static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate)
> > +{
> > + struct samsung_clk_pll *pll = to_clk_pll(hw);
> > + u32 pll_con, mdiv, pdiv, sdiv;
> > + u64 fvco = parent_rate;
> > +
> > + pll_con = __raw_readl(pll->con_reg);
> > + mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK;
> > + pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK;
> > + sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK;
> > +
> > + fvco *= (2 * (mdiv + 8));
> > + do_div(fvco, pdiv << sdiv);
> > +
> > + return (unsigned long)fvco;
> > +}
> > +
> > +static const struct clk_ops samsung_pll3000_clk_ops = {
> > + .recalc_rate = samsung_pll3000_recalc_rate,
> > +};
> > +
> > +/*
> >
> > * PLL35xx Clock Type
> > */
> >
> > /* Maximum lock time can be 270 * PDIV cycles */
> >
> > @@ -753,6 +819,12 @@ static void __init _samsung_clk_register_pll(struct
> > samsung_pll_clock *pll_clk,>
> > }
> >
> > switch (pll_clk->type) {
> >
> > + case pll_2126:
> > + init.ops = &samsung_pll2126_clk_ops;
> > + break;
> > + case pll_3000:
> > + init.ops = &samsung_pll3000_clk_ops;
> > + break;
> >
> > /* clk_ops for 35xx and 2550 are similar */
> > case pll_35xx:
> >
> > case pll_2550:
> > diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
> > index ddf9029..5b64bdb 100644
> > --- a/drivers/clk/samsung/clk-pll.h
> > +++ b/drivers/clk/samsung/clk-pll.h
> > @@ -13,6 +13,8 @@
> >
> > #define __SAMSUNG_CLK_PLL_H
> >
> > enum samsung_pll_type {
> >
> > + pll_2126,
> > + pll_3000,
> >
> > pll_35xx,
> > pll_36xx,
> > pll_2550,
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-12-31 20:03 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-10 15:14 [PATCH v4 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework Heiko Stübner
2013-12-10 15:15 ` [PATCH v4 1/7] clk: samsung: add pll_6552 variant for s3c2416 Heiko Stübner
2013-12-23 20:07 ` Mike Turquette
2013-12-10 15:15 ` [PATCH v4 2/7] clk: samsung: add plls used by the s3c2443 Heiko Stübner
2013-12-23 20:07 ` Mike Turquette
2013-12-31 20:03 ` Heiko Stübner [this message]
2013-12-10 15:17 ` [PATCH v4 3/7] dt-bindings: add binding for clock-controller of s3c2443 and following Heiko Stübner
2013-12-10 15:17 ` [PATCH v4 4/7] clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450 Heiko Stübner
2013-12-10 15:18 ` [PATCH v4 5/7] ARM: S3C24XX: prevent conflicts between ccf and non-ccf s3c24xx-socs Heiko Stübner
2013-12-10 15:19 ` [PATCH v4 6/7] ARM: dt: add clock data for s3c2416 Heiko Stübner
2013-12-10 15:20 ` [PATCH v4 7/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework Heiko Stübner
2013-12-10 15:27 ` [PATCH v4 0/7] " Tomasz Figa
2013-12-23 13:11 ` Heiko Stübner
2013-12-24 1:37 ` Kukjin Kim
2013-12-24 10:20 ` Sachin Kamat
2014-01-10 8:30 ` kgene at kernel.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1561704.n1QFeDVIXH@phil \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox