From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>,
Simon Horman <horms@verge.net.au>,
Geert Uytterhoeven <geert@linux-m68k.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: renesas: r8a77995: sort nodes
Date: Thu, 1 Aug 2019 23:25:13 +0900 [thread overview]
Message-ID: <1564669513-22756-1-git-send-email-ykaneko0929@gmail.com> (raw)
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
This patch is based on the master branch of Geert Uytterhoeven's renesas-devel
tree.
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 76 +++++++++++++++----------------
1 file changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index bcd5442..b3dbf55 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -242,41 +242,6 @@
resets = <&cpg 407>;
};
- hscif0: serial@e6540000 {
- compatible = "renesas,hscif-r8a77995",
- "renesas,rcar-gen3-hscif",
- "renesas,hscif";
- reg = <0 0xe6540000 0 0x60>;
- interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 520>,
- <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
- <&scif_clk>;
- clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac1 0x31>, <&dmac1 0x30>,
- <&dmac2 0x31>, <&dmac2 0x30>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 520>;
- status = "disabled";
- };
-
- hscif3: serial@e66a0000 {
- compatible = "renesas,hscif-r8a77995",
- "renesas,rcar-gen3-hscif",
- "renesas,hscif";
- reg = <0 0xe66a0000 0 0x60>;
- interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 517>,
- <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
- <&scif_clk>;
- clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x37>, <&dmac0 0x36>;
- dma-names = "tx", "rx";
- power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 517>;
- status = "disabled";
- };
-
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -344,6 +309,41 @@
status = "disabled";
};
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a77995",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+ <&dmac2 0x31>, <&dmac2 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a77995",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a77995",
"renesas,rcar-gen3-usbhs";
@@ -1100,6 +1100,9 @@
polling-delay = <1000>;
thermal-sensors = <&thermal>;
+ cooling-maps {
+ };
+
trips {
cpu-crit {
temperature = <120000>;
@@ -1107,9 +1110,6 @@
type = "critical";
};
};
-
- cooling-maps {
- };
};
};
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-08-01 14:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-01 14:25 Yoshihiro Kaneko [this message]
2019-08-05 15:41 ` [PATCH] arm64: dts: renesas: r8a77995: sort nodes Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1564669513-22756-1-git-send-email-ykaneko0929@gmail.com \
--to=ykaneko0929@gmail.com \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).