Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>,
	Simon Horman <horms@verge.net.au>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: renesas: r8a774a1: sort nodes
Date: Mon, 19 Aug 2019 21:54:55 +0900	[thread overview]
Message-ID: <1566219295-23003-1-git-send-email-ykaneko0929@gmail.com> (raw)

Sort nodes.

If node address is present
   * Sort by node address, grouping all nodes with the same compat string
     and sorting the group alphabetically.
Else
   * Sort alphabetically

This should not have any run-time effect.

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---

This patch is based on the master branch of Geert Uytterhoeven's renesas-devel
tree.

 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 174 +++++++++++++++---------------
 1 file changed, 87 insertions(+), 87 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index bdb4675..06c7c84 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1726,6 +1726,28 @@
 				      "ssi.1", "ssi.0";
 			status = "disabled";
 
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
 			rcar_sound,dvc {
 				dvc0: dvc-0 {
 					dmas = <&audma1 0xbc>;
@@ -1742,17 +1764,6 @@
 				mix1: mix-1 { };
 			};
 
-			rcar_sound,ctu {
-				ctu00: ctu-0 { };
-				ctu01: ctu-1 { };
-				ctu02: ctu-2 { };
-				ctu03: ctu-3 { };
-				ctu10: ctu-4 { };
-				ctu11: ctu-5 { };
-				ctu12: ctu-6 { };
-				ctu13: ctu-7 { };
-			};
-
 			rcar_sound,src {
 				src0: src-0 {
 					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
@@ -1806,6 +1817,59 @@
 				};
 			};
 
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
 			rcar_sound,ssiu {
 				ssiu00: ssiu-0 {
 					dmas = <&audma0 0x15>, <&audma1 0x16>;
@@ -2016,70 +2080,6 @@
 					dma-names = "rx", "tx";
 				};
 			};
-
-			rcar_sound,ssi {
-				ssi0: ssi-0 {
-					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma1 0x02>;
-					dma-names = "rx", "tx";
-				};
-				ssi1: ssi-1 {
-					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma1 0x04>;
-					dma-names = "rx", "tx";
-				};
-				ssi2: ssi-2 {
-					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma1 0x06>;
-					dma-names = "rx", "tx";
-				};
-				ssi3: ssi-3 {
-					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma1 0x08>;
-					dma-names = "rx", "tx";
-				};
-				ssi4: ssi-4 {
-					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma1 0x0a>;
-					dma-names = "rx", "tx";
-				};
-				ssi5: ssi-5 {
-					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
-					dma-names = "rx", "tx";
-				};
-				ssi6: ssi-6 {
-					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
-					dma-names = "rx", "tx";
-				};
-				ssi7: ssi-7 {
-					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma1 0x10>;
-					dma-names = "rx", "tx";
-				};
-				ssi8: ssi-8 {
-					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma1 0x12>;
-					dma-names = "rx", "tx";
-				};
-				ssi9: ssi-9 {
-					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma1 0x14>;
-					dma-names = "rx", "tx";
-				};
-			};
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-				};
-				port@1 {
-					reg = <1>;
-				};
-			};
 		};
 
 		audma0: dma-controller@ec700000 {
@@ -2746,6 +2746,18 @@
 			thermal-sensors = <&tsc 2>;
 			sustainable-power = <3874>;
 
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
 			trips {
 				target: trip-point1 {
 					temperature = <100000>;
@@ -2759,18 +2771,6 @@
 					type = "critical";
 				};
 			};
-			cooling-maps {
-				map0 {
-					trip = <&target>;
-					cooling-device = <&a57_0 0 2>;
-					contribution = <1024>;
-				};
-				map1 {
-					trip = <&target>;
-					cooling-device = <&a53_0 0 2>;
-					contribution = <1024>;
-				};
-			};
 		};
 	};
 
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-08-19 12:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-19 12:54 Yoshihiro Kaneko [this message]
2019-08-21  8:30 ` [PATCH] arm64: dts: renesas: r8a774a1: sort nodes Simon Horman
2019-08-21  8:53 ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566219295-23003-1-git-send-email-ykaneko0929@gmail.com \
    --to=ykaneko0929@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox