From: Weiyi Lu <weiyi.lu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>,
Weiyi Lu <weiyi.lu@mediatek.com>,
srv_heupstream@mediatek.com, linux-kernel@vger.kernel.org,
Fan Chen <fan.chen@mediatek.com>,
linux-mediatek@lists.infradead.org,
Yong Wu <yong.wu@mediatek.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 10/13] soc: mediatek: Add subsys clock control for bus protection
Date: Wed, 28 Aug 2019 17:11:43 +0800 [thread overview]
Message-ID: <1566983506-26598-11-git-send-email-weiyi.lu@mediatek.com> (raw)
In-Reply-To: <1566983506-26598-1-git-send-email-weiyi.lu@mediatek.com>
Add subsys CG control flow before/after the bus protect control
due to bus protection need SMI bus relative CGs enabled to feedback
its ack.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
drivers/soc/mediatek/mtk-scpsys.c | 72 +++++++++++++++++++++++++++++++++++++--
1 file changed, 70 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index f25101f..33c4034 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -108,6 +108,7 @@ enum clk_id {
};
#define MAX_CLKS 3
+#define MAX_SUBSYS_CLKS 10
/**
* struct scp_domain_data - scp domain data for power on/off flow
@@ -120,6 +121,8 @@ enum clk_id {
* @clk_id: The basic clocks required by this power domain.
* @basic_clk_id: provide the same purpose with field "clk_id"
* by declaring basic clock prefix name rather than clk_id.
+ * @subsys_clk_prefix: The prefix name of the clocks need to be enabled
+ * before releasing bus protection.
* @caps: The flag for active wake-up action.
* @bp_table: The mask table for multiple step bus protection.
*/
@@ -132,6 +135,7 @@ struct scp_domain_data {
u32 bus_prot_mask;
enum clk_id clk_id[MAX_CLKS];
const char *basic_clk_id[MAX_CLKS];
+ const char *subsys_clk_prefix;
u8 caps;
struct bus_prot bp_table[MAX_STEPS];
};
@@ -142,6 +146,7 @@ struct scp_domain {
struct generic_pm_domain genpd;
struct scp *scp;
struct clk *clk[MAX_CLKS];
+ struct clk *subsys_clk[MAX_SUBSYS_CLKS];
const struct scp_domain_data *data;
struct regulator *supply;
};
@@ -347,16 +352,22 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
val |= PWR_RST_B_BIT;
writel(val, ctl_addr);
- ret = scpsys_sram_enable(scpd, ctl_addr);
+ ret = scpsys_clk_enable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
if (ret < 0)
goto err_pwr_ack;
+ ret = scpsys_sram_enable(scpd, ctl_addr);
+ if (ret < 0)
+ goto err_sram;
+
ret = scpsys_bus_protect_disable(scpd);
if (ret < 0)
- goto err_pwr_ack;
+ goto err_sram;
return 0;
+err_sram:
+ scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
err_pwr_ack:
scpsys_clk_disable(scpd->clk, MAX_CLKS);
err_clk:
@@ -383,6 +394,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
if (ret < 0)
goto out;
+ scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
+
/* subsys power off */
val = readl(ctl_addr) | PWR_ISO_BIT;
writel(val, ctl_addr);
@@ -419,6 +432,48 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
return ret;
}
+static int init_subsys_clks(struct platform_device *pdev,
+ const char *prefix, struct clk **clk)
+{
+ struct device_node *node = pdev->dev.of_node;
+ u32 prefix_len, sub_clk_cnt = 0;
+ struct property *prop;
+ const char *clk_name;
+
+ if (!node) {
+ dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n",
+ PTR_ERR(node));
+ return PTR_ERR(node);
+ }
+
+ prefix_len = strlen(prefix);
+
+ of_property_for_each_string(node, "clock-names", prop, clk_name) {
+ if (!strncmp(clk_name, prefix, prefix_len) &&
+ (clk_name[prefix_len] == '-')) {
+ if (sub_clk_cnt >= MAX_SUBSYS_CLKS) {
+ dev_err(&pdev->dev,
+ "subsys clk out of range %d\n",
+ sub_clk_cnt);
+ return -ENOMEM;
+ }
+
+ clk[sub_clk_cnt] = devm_clk_get(&pdev->dev,
+ clk_name);
+
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev,
+ "Subsys clk read fail %ld\n",
+ PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+ sub_clk_cnt++;
+ }
+ }
+
+ return sub_clk_cnt;
+}
+
static void init_clks(struct platform_device *pdev, struct clk **clk)
{
int i;
@@ -506,6 +561,7 @@ static struct scp *init_scp(struct platform_device *pdev,
struct scp_domain *scpd = &scp->domains[i];
struct generic_pm_domain *genpd = &scpd->genpd;
const struct scp_domain_data *data = &scp_domain_data[i];
+ int clk_cnt;
pd_data->domains[i] = genpd;
scpd->scp = scp;
@@ -534,6 +590,18 @@ static struct scp *init_scp(struct platform_device *pdev,
data->basic_clk_id[j]);
}
+ if (data->subsys_clk_prefix) {
+ clk_cnt = init_subsys_clks(pdev,
+ data->subsys_clk_prefix,
+ scpd->subsys_clk);
+ if (clk_cnt < 0) {
+ dev_err(&pdev->dev,
+ "%s: subsys clk unavailable\n",
+ data->name);
+ return ERR_PTR(clk_cnt);
+ }
+ }
+
genpd->name = data->name;
genpd->power_off = scpsys_power_off;
genpd->power_on = scpsys_power_on;
--
1.8.1.1.dirty
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-28 9:13 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 9:11 [PATCH v7 00/13] Mediatek MT8183 scpsys support Weiyi Lu
2019-08-28 9:11 ` [PATCH v7 01/13] dt-bindings: mediatek: Add property to mt8183 smi-common Weiyi Lu
2019-08-28 9:11 ` [PATCH v7 02/13] dt-bindings: soc: Add MT8183 power dt-bindings Weiyi Lu
2019-08-28 9:39 ` Matthias Brugger
2019-10-08 1:25 ` Weiyi Lu
2019-08-28 9:11 ` [PATCH v7 03/13] soc: mediatek: Refactor polling timeout and documentation Weiyi Lu
2019-08-28 9:43 ` Matthias Brugger
2019-08-28 9:11 ` [PATCH v7 04/13] soc: mediatek: Refactor regulator control Weiyi Lu
2019-08-28 9:44 ` Matthias Brugger
2019-08-28 9:11 ` [PATCH v7 05/13] soc: mediatek: Refactor clock control Weiyi Lu
2019-08-28 9:46 ` Matthias Brugger
2019-08-28 9:11 ` [PATCH v7 06/13] soc: mediatek: Refactor sram control Weiyi Lu
2019-08-28 10:22 ` Matthias Brugger
2019-08-28 9:11 ` [PATCH v7 07/13] soc: mediatek: Refactor bus protection control Weiyi Lu
2019-08-28 10:28 ` Matthias Brugger
2019-08-28 9:11 ` [PATCH v7 08/13] soc: mediatek: Add basic_clk_id to scp_power_data Weiyi Lu
2019-08-28 9:11 ` [PATCH v7 09/13] soc: mediatek: Add multiple step bus protection control Weiyi Lu
2019-08-28 9:11 ` Weiyi Lu [this message]
2019-08-28 9:11 ` [PATCH v7 11/13] soc: mediatek: Add extra sram control Weiyi Lu
2019-08-28 9:11 ` [PATCH v7 12/13] soc: mediatek: Add MT8183 scpsys support Weiyi Lu
2019-08-28 9:11 ` [PATCH v7 13/13] arm64: dts: Add power controller device node of MT8183 Weiyi Lu
2019-08-29 5:15 ` CK Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566983506-26598-11-git-send-email-weiyi.lu@mediatek.com \
--to=weiyi.lu@mediatek.com \
--cc=drinkcat@chromium.org \
--cc=fan.chen@mediatek.com \
--cc=jamesjj.liao@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=srv_heupstream@mediatek.com \
--cc=yong.wu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).