From: Sergey Organov <sorganov@gmail.com>
To: linux-serial@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Sergey Organov" <sorganov@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/5] serial: imx: use Tx ready rather than Tx empty irq
Date: Wed, 28 Aug 2019 21:37:55 +0300 [thread overview]
Message-ID: <1567017475-11919-6-git-send-email-sorganov@gmail.com> (raw)
In-Reply-To: <1567017475-11919-1-git-send-email-sorganov@gmail.com>
This should help to avoid unnecessary gaps in transmission while
adding little overhead due to low default Tx threshold level (2
bytes).
Signed-off-by: Sergey Organov <sorganov@gmail.com>
---
drivers/tty/serial/imx.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e89045a..87c58f9 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -439,7 +439,7 @@ static void imx_uart_stop_tx(struct uart_port *port)
return;
ucr1 = imx_uart_readl(sport, UCR1);
- imx_uart_writel(sport, ucr1 & ~UCR1_TXMPTYEN, UCR1);
+ imx_uart_writel(sport, ucr1 & ~UCR1_TRDYEN, UCR1);
/* in rs485 mode disable transmitter if shifter is empty */
if (port->rs485.flags & SER_RS485_ENABLED &&
@@ -517,7 +517,7 @@ static inline void imx_uart_transmit_buffer(struct imx_port *sport)
* and the TX IRQ is disabled.
**/
ucr1 = imx_uart_readl(sport, UCR1);
- ucr1 &= ~UCR1_TXMPTYEN;
+ ucr1 &= ~UCR1_TRDYEN;
if (sport->dma_is_txing) {
ucr1 |= UCR1_TXDMAEN;
imx_uart_writel(sport, ucr1, UCR1);
@@ -679,7 +679,7 @@ static void imx_uart_start_tx(struct uart_port *port)
if (!sport->dma_is_enabled) {
ucr1 = imx_uart_readl(sport, UCR1);
- imx_uart_writel(sport, ucr1 | UCR1_TXMPTYEN, UCR1);
+ imx_uart_writel(sport, ucr1 | UCR1_TRDYEN, UCR1);
}
if (sport->dma_is_enabled) {
@@ -688,7 +688,7 @@ static void imx_uart_start_tx(struct uart_port *port)
* disable TX DMA to let TX interrupt to send X-char */
ucr1 = imx_uart_readl(sport, UCR1);
ucr1 &= ~UCR1_TXDMAEN;
- ucr1 |= UCR1_TXMPTYEN;
+ ucr1 |= UCR1_TRDYEN;
imx_uart_writel(sport, ucr1, UCR1);
return;
}
@@ -874,7 +874,7 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id)
usr1 &= ~USR1_RRDY;
if ((ucr2 & UCR2_ATEN) == 0)
usr1 &= ~USR1_AGTIM;
- if ((ucr1 & UCR1_TXMPTYEN) == 0)
+ if ((ucr1 & UCR1_TRDYEN) == 0)
usr1 &= ~USR1_TRDY;
if ((ucr4 & UCR4_TCEN) == 0)
usr2 &= ~USR2_TXDC;
@@ -1474,7 +1474,7 @@ static void imx_uart_shutdown(struct uart_port *port)
spin_lock_irqsave(&sport->port.lock, flags);
ucr1 = imx_uart_readl(sport, UCR1);
- ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN | UCR1_RXDMAEN | UCR1_ATDMAEN);
+ ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN | UCR1_RXDMAEN | UCR1_ATDMAEN);
imx_uart_writel(sport, ucr1, UCR1);
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -1778,7 +1778,7 @@ static int imx_uart_poll_init(struct uart_port *port)
ucr1 |= IMX1_UCR1_UARTCLKEN;
ucr1 |= UCR1_UARTEN;
- ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RTSDEN | UCR1_RRDYEN);
+ ucr1 &= ~(UCR1_TRDYEN | UCR1_RTSDEN | UCR1_RRDYEN);
ucr2 |= UCR2_RXEN;
ucr2 &= ~UCR2_ATEN;
@@ -1938,7 +1938,7 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
if (imx_uart_is_imx1(sport))
ucr1 |= IMX1_UCR1_UARTCLKEN;
ucr1 |= UCR1_UARTEN;
- ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
+ ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN);
imx_uart_writel(sport, ucr1, UCR1);
@@ -2294,7 +2294,7 @@ static int imx_uart_probe(struct platform_device *pdev)
/* Disable interrupts before requesting them */
ucr1 = imx_uart_readl(sport, UCR1);
ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN |
- UCR1_TXMPTYEN | UCR1_RTSDEN);
+ UCR1_TRDYEN | UCR1_RTSDEN);
imx_uart_writel(sport, ucr1, UCR1);
if (!imx_uart_is_imx1(sport) && sport->dte_mode) {
--
2.10.0.1.g57b01a3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2019-08-28 18:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190530152950.25377-1-sorganov@gmail.com>
2019-08-28 18:37 ` [PATCH v2 0/5] Serial: imx: various fixes Sergey Organov
2019-08-28 18:37 ` [PATCH v2 1/5] serial: imx: get rid of unbounded busy-waiting loop Sergey Organov
2019-08-28 18:37 ` [PATCH v2 2/5] serial: imx: do not stop Rx/Tx on termios change Sergey Organov
2019-08-28 18:37 ` [PATCH v2 3/5] serial: imx: do not disable individual irqs during " Sergey Organov
2019-08-28 18:37 ` [PATCH v2 4/5] serial: imx: fix data breakage on " Sergey Organov
2019-08-28 18:37 ` Sergey Organov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1567017475-11919-6-git-send-email-sorganov@gmail.com \
--to=sorganov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-serial@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox