linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Yingjoe Chen <srv_yingjoe.chen@mediatek.com>
To: Jiaxin Yu <jiaxin.yu@mediatek.com>
Cc: mark.rutland@arm.com, alsa-devel@alsa-project.org,
	yong.liang@mediatek.com, robh+dt@kernel.org, lgirdwood@gmail.com,
	tzungbi@google.com, broonie@kernel.org,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, eason.yen@mediatek.com,
	perex@perex.cz, wim@linux-watchdog.org, linux@roeck-us.net
Subject: Re: [PATCH v4 2/2] watchdog: mtk_wdt: mt8183: Add reset controller
Date: Thu, 14 Nov 2019 15:34:50 +0800	[thread overview]
Message-ID: <1573716890.27914.8.camel@mtksdaap41> (raw)
In-Reply-To: <1571205548-13704-3-git-send-email-jiaxin.yu@mediatek.com>

On Wed, 2019-10-16 at 13:59 +0800, Jiaxin Yu wrote:
> From: "yong.liang" <yong.liang@mediatek.com>
> 
> Add reset controller API in watchdog driver.
> Besides watchdog, MTK toprgu module also provide sub-system (eg, audio,
> camera, codec and connectivity) software reset functionality.
> 
> Signed-off-by: yong.liang <yong.liang@mediatek.com>

Jiaxin,

Since you send this patch, you should add your signed-off-by tag here as
well.

This looks good to me otherwise. Feel free to add my reviewed by if you
want:

Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>

Joe.C

> ---
>  drivers/watchdog/Kconfig   |   1 +
>  drivers/watchdog/mtk_wdt.c | 111 ++++++++++++++++++++++++++++++++++++-
>  2 files changed, 111 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 2e07caab9db2..629249fe5305 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -717,6 +717,7 @@ config MEDIATEK_WATCHDOG
>  	tristate "Mediatek SoCs watchdog support"
>  	depends on ARCH_MEDIATEK || COMPILE_TEST
>  	select WATCHDOG_CORE
> +	select RESET_CONTROLLER
>  	help
>  	  Say Y here to include support for the watchdog timer
>  	  in Mediatek SoCs.
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index 9c3d0033260d..d29484c7940a 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -9,6 +9,9 @@
>   * Based on sunxi_wdt.c
>   */
>  
> +#include <dt-bindings/reset-controller/mt2712-resets.h>
> +#include <dt-bindings/reset-controller/mt8183-resets.h>
> +#include <linux/delay.h>
>  #include <linux/err.h>
>  #include <linux/init.h>
>  #include <linux/io.h>
> @@ -16,10 +19,12 @@
>  #include <linux/module.h>
>  #include <linux/moduleparam.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/slab.h>
>  #include <linux/types.h>
>  #include <linux/watchdog.h>
> -#include <linux/delay.h>
>  
>  #define WDT_MAX_TIMEOUT		31
>  #define WDT_MIN_TIMEOUT		1
> @@ -44,6 +49,9 @@
>  #define WDT_SWRST		0x14
>  #define WDT_SWRST_KEY		0x1209
>  
> +#define WDT_SWSYSRST		0x18U
> +#define WDT_SWSYS_RST_KEY	0x88000000
> +
>  #define DRV_NAME		"mtk-wdt"
>  #define DRV_VERSION		"1.0"
>  
> @@ -53,8 +61,99 @@ static unsigned int timeout;
>  struct mtk_wdt_dev {
>  	struct watchdog_device wdt_dev;
>  	void __iomem *wdt_base;
> +	spinlock_t lock; /* protects WDT_SWSYSRST reg */
> +	struct reset_controller_dev rcdev;
> +};
> +
> +struct mtk_wdt_data {
> +	int sw_rst_num;
>  };
>  
> +static const struct mtk_wdt_data mt2712_data = {
> +	.sw_rst_num = MT2712_TOPRGU_SW_RST_NUM,
> +};
> +
> +static const struct mtk_wdt_data mt8183_data = {
> +	.sw_rst_num = MT8183_TOPRGU_SW_RST_NUM,
> +};
> +
> +static int toprgu_reset_assert(struct reset_controller_dev *rcdev,
> +			       unsigned long id)
> +{
> +	unsigned int tmp;
> +	unsigned long flags;
> +	struct mtk_wdt_dev *data =
> +		 container_of(rcdev, struct mtk_wdt_dev, rcdev);
> +
> +	spin_lock_irqsave(&data->lock, flags);
> +
> +	tmp = __raw_readl(data->wdt_base + WDT_SWSYSRST);
> +	tmp |= BIT(id);
> +	tmp |= WDT_SWSYS_RST_KEY;
> +	writel(tmp, data->wdt_base + WDT_SWSYSRST);
> +
> +	spin_unlock_irqrestore(&data->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int toprgu_reset_deassert(struct reset_controller_dev *rcdev,
> +				 unsigned long id)
> +{
> +	unsigned int tmp;
> +	unsigned long flags;
> +	struct mtk_wdt_dev *data =
> +		 container_of(rcdev, struct mtk_wdt_dev, rcdev);
> +
> +	spin_lock_irqsave(&data->lock, flags);
> +
> +	tmp = __raw_readl(data->wdt_base + WDT_SWSYSRST);
> +	tmp &= ~BIT(id);
> +	tmp |= WDT_SWSYS_RST_KEY;
> +	writel(tmp, data->wdt_base + WDT_SWSYSRST);
> +
> +	spin_unlock_irqrestore(&data->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int toprgu_reset(struct reset_controller_dev *rcdev,
> +			unsigned long id)
> +{
> +	int ret;
> +
> +	ret = toprgu_reset_assert(rcdev, id);
> +	if (ret)
> +		return ret;
> +
> +	return toprgu_reset_deassert(rcdev, id);
> +}
> +
> +static const struct reset_control_ops toprgu_reset_ops = {
> +	.assert = toprgu_reset_assert,
> +	.deassert = toprgu_reset_deassert,
> +	.reset = toprgu_reset,
> +};
> +
> +static int toprgu_register_reset_controller(struct platform_device *pdev,
> +					    int rst_num)
> +{
> +	int ret;
> +	struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
> +
> +	spin_lock_init(&mtk_wdt->lock);
> +
> +	mtk_wdt->rcdev.owner = THIS_MODULE;
> +	mtk_wdt->rcdev.nr_resets = rst_num;
> +	mtk_wdt->rcdev.ops = &toprgu_reset_ops;
> +	mtk_wdt->rcdev.of_node = pdev->dev.of_node;
> +	ret = reset_controller_register(&mtk_wdt->rcdev);
> +	if (ret != 0)
> +		dev_err(&pdev->dev,
> +			"couldn't register wdt reset controller: %d\n", ret);
> +	return ret;
> +}
> +
>  static int mtk_wdt_restart(struct watchdog_device *wdt_dev,
>  			   unsigned long action, void *data)
>  {
> @@ -155,6 +254,7 @@ static int mtk_wdt_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct mtk_wdt_dev *mtk_wdt;
> +	struct mtk_wdt_data *wdt_data;
>  	int err;
>  
>  	mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
> @@ -190,6 +290,13 @@ static int mtk_wdt_probe(struct platform_device *pdev)
>  	dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
>  		 mtk_wdt->wdt_dev.timeout, nowayout);
>  
> +	wdt_data = (struct mtk_wdt_data *)of_device_get_match_data(dev);
> +	if (wdt_data) {
> +		err = toprgu_register_reset_controller(pdev,
> +						       wdt_data->sw_rst_num);
> +		if (err)
> +			return err;
> +	}
>  	return 0;
>  }
>  
> @@ -218,7 +325,9 @@ static int mtk_wdt_resume(struct device *dev)
>  #endif
>  
>  static const struct of_device_id mtk_wdt_dt_ids[] = {
> +	{ .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data },
>  	{ .compatible = "mediatek,mt6589-wdt" },
> +	{ .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids);

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-01-02  9:06 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-16  5:59 [PATCH v4 0/2] ASoC: mt8183: fix audio playback slowly after playback Jiaxin Yu
2019-10-16  5:59 ` [PATCH v4 1/2] dt-bindings: mediatek: mt8183: Add #reset-cells Jiaxin Yu
2019-11-13  9:46   ` Jiaxin Yu
2019-10-16  5:59 ` [PATCH v4 2/2] watchdog: mtk_wdt: mt8183: Add reset controller Jiaxin Yu
2019-11-14  7:34   ` Yingjoe Chen [this message]
2019-11-14  7:41   ` Yingjoe Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1573716890.27914.8.camel@mtksdaap41 \
    --to=srv_yingjoe.chen@mediatek.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=eason.yen@mediatek.com \
    --cc=jiaxin.yu@mediatek.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tzungbi@google.com \
    --cc=wim@linux-watchdog.org \
    --cc=yong.liang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).