linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Amit Singh Tomar <amittomer25@gmail.com>
To: andre.przywara@arm.com, vkoul@kernel.org, afaerber@suse.de,
	manivannan.sadhasivam@linaro.org
Cc: dmaengine@vger.kernel.org, dan.j.williams@intel.com,
	linux-actions@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	cristian.ciocaltea@gmail.com
Subject: [PATCH RFC 1/8] dmaengine: Actions: get rid of bit fields from dma descriptor
Date: Wed,  6 May 2020 16:06:03 +0530	[thread overview]
Message-ID: <1588761371-9078-2-git-send-email-amittomer25@gmail.com> (raw)
In-Reply-To: <1588761371-9078-1-git-send-email-amittomer25@gmail.com>

At the moment, Driver uses bit fields to describe registers of the DMA
descriptor structure that makes it less portable and maintainable, and
Andre suugested(and even sketched important bits for it) to make use of
array to describe this DMA descriptors instead. It gives the flexibility
while extending support for other platform such as Actions S700.

This commit removes the "owl_dma_lli_hw" (that includes bit-fields) and
uses array to describe DMA descriptor.

Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
 drivers/dma/owl-dma.c | 77 ++++++++++++++++++++++-----------------------------
 1 file changed, 33 insertions(+), 44 deletions(-)

diff --git a/drivers/dma/owl-dma.c b/drivers/dma/owl-dma.c
index c683051257fd..b0d80a2fa383 100644
--- a/drivers/dma/owl-dma.c
+++ b/drivers/dma/owl-dma.c
@@ -120,30 +120,18 @@
 #define BIT_FIELD(val, width, shift, newshift)	\
 		((((val) >> (shift)) & ((BIT(width)) - 1)) << (newshift))
 
-/**
- * struct owl_dma_lli_hw - Hardware link list for dma transfer
- * @next_lli: physical address of the next link list
- * @saddr: source physical address
- * @daddr: destination physical address
- * @flen: frame length
- * @fcnt: frame count
- * @src_stride: source stride
- * @dst_stride: destination stride
- * @ctrla: dma_mode and linklist ctrl config
- * @ctrlb: interrupt config
- * @const_num: data for constant fill
- */
-struct owl_dma_lli_hw {
-	u32	next_lli;
-	u32	saddr;
-	u32	daddr;
-	u32	flen:20;
-	u32	fcnt:12;
-	u32	src_stride;
-	u32	dst_stride;
-	u32	ctrla;
-	u32	ctrlb;
-	u32	const_num;
+/* Describe DMA descriptor, hardware link list for dma transfer */
+enum owl_dmadesc_offsets {
+	OWL_DMADESC_NEXT_LLI = 0,
+	OWL_DMADESC_SADDR,
+	OWL_DMADESC_DADDR,
+	OWL_DMADESC_FLEN,
+	OWL_DMADESC_SRC_STRIDE,
+	OWL_DMADESC_DST_STRIDE,
+	OWL_DMADESC_CTRLA,
+	OWL_DMADESC_CTRLB,
+	OWL_DMADESC_CONST_NUM,
+	OWL_DMADESC_SIZE
 };
 
 /**
@@ -153,7 +141,7 @@ struct owl_dma_lli_hw {
  * @node: node for txd's lli_list
  */
 struct owl_dma_lli {
-	struct  owl_dma_lli_hw	hw;
+	u32			hw[OWL_DMADESC_SIZE];
 	dma_addr_t		phys;
 	struct list_head	node;
 };
@@ -351,8 +339,9 @@ static struct owl_dma_lli *owl_dma_add_lli(struct owl_dma_txd *txd,
 		list_add_tail(&next->node, &txd->lli_list);
 
 	if (prev) {
-		prev->hw.next_lli = next->phys;
-		prev->hw.ctrla |= llc_hw_ctrla(OWL_DMA_MODE_LME, 0);
+		prev->hw[OWL_DMADESC_NEXT_LLI] = next->phys;
+		prev->hw[OWL_DMADESC_CTRLA] |=
+					llc_hw_ctrla(OWL_DMA_MODE_LME, 0);
 	}
 
 	return next;
@@ -365,8 +354,7 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 				  struct dma_slave_config *sconfig,
 				  bool is_cyclic)
 {
-	struct owl_dma_lli_hw *hw = &lli->hw;
-	u32 mode;
+	u32 mode, ctrlb;
 
 	mode = OWL_DMA_MODE_PW(0);
 
@@ -407,22 +395,22 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 		return -EINVAL;
 	}
 
-	hw->next_lli = 0; /* One link list by default */
-	hw->saddr = src;
-	hw->daddr = dst;
-
-	hw->fcnt = 1; /* Frame count fixed as 1 */
-	hw->flen = len; /* Max frame length is 1MB */
-	hw->src_stride = 0;
-	hw->dst_stride = 0;
-	hw->ctrla = llc_hw_ctrla(mode,
-				 OWL_DMA_LLC_SAV_LOAD_NEXT |
-				 OWL_DMA_LLC_DAV_LOAD_NEXT);
+	lli->hw[OWL_DMADESC_CTRLA] = llc_hw_ctrla(mode,
+						  OWL_DMA_LLC_SAV_LOAD_NEXT |
+						  OWL_DMA_LLC_DAV_LOAD_NEXT);
 
 	if (is_cyclic)
-		hw->ctrlb = llc_hw_ctrlb(OWL_DMA_INTCTL_BLOCK);
+		ctrlb = llc_hw_ctrlb(OWL_DMA_INTCTL_BLOCK);
 	else
-		hw->ctrlb = llc_hw_ctrlb(OWL_DMA_INTCTL_SUPER_BLOCK);
+		ctrlb = llc_hw_ctrlb(OWL_DMA_INTCTL_SUPER_BLOCK);
+
+	lli->hw[OWL_DMADESC_NEXT_LLI] = 0;
+	lli->hw[OWL_DMADESC_SADDR] = src;
+	lli->hw[OWL_DMADESC_DADDR] = dst;
+	lli->hw[OWL_DMADESC_SRC_STRIDE] = 0;
+	lli->hw[OWL_DMADESC_DST_STRIDE] = 0;
+	lli->hw[OWL_DMADESC_FLEN] = len | 1 << 20;
+	lli->hw[OWL_DMADESC_CTRLB] = ctrlb;
 
 	return 0;
 }
@@ -754,7 +742,8 @@ static u32 owl_dma_getbytes_chan(struct owl_dma_vchan *vchan)
 			/* Start from the next active node */
 			if (lli->phys == next_lli_phy) {
 				list_for_each_entry(lli, &txd->lli_list, node)
-					bytes += lli->hw.flen;
+					bytes += lli->hw[OWL_DMADESC_FLEN] &
+						 GENMASK(19, 0);
 				break;
 			}
 		}
@@ -785,7 +774,7 @@ static enum dma_status owl_dma_tx_status(struct dma_chan *chan,
 	if (vd) {
 		txd = to_owl_txd(&vd->tx);
 		list_for_each_entry(lli, &txd->lli_list, node)
-			bytes += lli->hw.flen;
+			bytes += lli->hw[OWL_DMADESC_FLEN] & GENMASK(19, 0);
 	} else {
 		bytes = owl_dma_getbytes_chan(vchan);
 	}
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-05-06 10:36 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-06 10:36 [PATCH RFC 0/8] Add MMC support for S700 Amit Singh Tomar
2020-05-06 10:36 ` Amit Singh Tomar [this message]
2020-05-10 15:51   ` [PATCH RFC 1/8] dmaengine: Actions: get rid of bit fields from dma descriptor Manivannan Sadhasivam
2020-05-11 10:45     ` Amit Tomer
2020-05-11 11:20       ` Manivannan Sadhasivam
2020-05-11 11:44         ` André Przywara
2020-05-11 12:04           ` Manivannan Sadhasivam
2020-05-11 12:48             ` André Przywara
2020-05-11 15:29               ` Manivannan Sadhasivam
2020-05-06 10:36 ` [PATCH RFC 2/8] dmaengine: Actions: Add support for S700 DMA engine Amit Singh Tomar
2020-05-06 11:12   ` André Przywara
2020-05-06 12:54     ` Amit Tomer
2020-05-06 13:04       ` André Przywara
2020-05-06 10:36 ` [PATCH RFC 3/8] clk: actions: Add MMC clock-register reset bits Amit Singh Tomar
2020-05-06 10:36 ` [PATCH RFC 4/8] arm64: dts: actions: disable sps node from S700 Amit Singh Tomar
2020-05-07 10:15   ` André Przywara
2020-05-06 10:36 ` [PATCH RFC 5/8] arm64: dts: actions: Add DMA Controller for S700 Amit Singh Tomar
2020-05-06 10:36 ` [PATCH RFC 6/8] dt-bindings: reset: s700: Add binding constants for mmc Amit Singh Tomar
2020-05-14 15:08   ` Rob Herring
2020-05-06 10:36 ` [PATCH RFC 7/8] arm64: dts: actions: Add MMC controller support for S700 Amit Singh Tomar
2020-05-06 10:36 ` [PATCH RFC 8/8] arm64: dts: actions: Add uSD support for Cubieboard7 Amit Singh Tomar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1588761371-9078-2-git-send-email-amittomer25@gmail.com \
    --to=amittomer25@gmail.com \
    --cc=afaerber@suse.de \
    --cc=andre.przywara@arm.com \
    --cc=cristian.ciocaltea@gmail.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-actions@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).