[PATCH] rtc: pl031: enable rtc alarm interrupt again

[PATCH] rtc: pl031: enable rtc alarm interrupt again

[Amit Singh Tomar]

After commit c8ff5841a90b ("rtc: pl031: switch to rtc_time64_to_tm/
rtc_tm_to_time64"), it has been observed the rtc alarm interrupt is
no more registered, and due to this waking up the system
(using rtc alarm interrupt) from suspend state is no longer possible.

Besides this, we get broken output from "hwclock".

root@localhost:~# hwclock
hwclock: select() to /dev/rtc to wait for clock tick timed out: No such file or directory

This is due to the fact that call to pl031_alarm_irq_enable(dev, alarm->enabled)
is removed (from pl031_set_alarm()) in commit c8ff5841a90b, and alarm interrupt
never gets enabled.

This commit fixes it by re-introduces the missing
pl031_alarm_irq_enable(dev, alarm->enabled).

Fixes: c8ff5841a90b ("rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64")

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
This patch is tested on QEMU ARM64 TCG guest

Without this patch:
root@localhost:~# echo +10 > /sys/class/rtc/rtc0/wakealarm && sleep 10 && cat /proc/interrupts | grep pl031
39:          0          0     GICv2  34 Level     rtc-pl031

With this patch:
root@localhost:~# echo +10 > /sys/class/rtc/rtc0/wakealarm && sleep 10 && cat /proc/interrupts | grep pl031
39:          1          0     GICv2  34 Level     rtc-pl031

root@localhost:~# hwclock 
Thu Aug 13 11:00:06 2020  -1.009351 seconds

root@localhost:~# echo +30 > /sys/class/rtc/rtc0/wakealarm
root@localhost:~# echo -n mem > /sys/power/state
root@localhost:~# hwclock -r
Thu Aug 13 08:59:14 2020  -1.010357 seconds

---
 drivers/rtc/rtc-pl031.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 40d7450a1ce4..c6b89273feba 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -275,6 +275,7 @@ static int pl031_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	struct pl031_local *ldata = dev_get_drvdata(dev);
 
 	writel(rtc_tm_to_time64(&alarm->time), ldata->base + RTC_MR);
+	pl031_alarm_irq_enable(dev, alarm->enabled);
 
 	return 0;
 }
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] rtc: pl031: enable rtc alarm interrupt again

[Alexandre Belloni]

Hi,

Thank you for your patch. However, this is already fixed upstream:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/rtc?id=4df2ef85f0efe44505f511ca5e4455585f53a2da

On 13/08/2020 16:44:28+0530, Amit Singh Tomar wrote:
> After commit c8ff5841a90b ("rtc: pl031: switch to rtc_time64_to_tm/
> rtc_tm_to_time64"), it has been observed the rtc alarm interrupt is
> no more registered, and due to this waking up the system
> (using rtc alarm interrupt) from suspend state is no longer possible.
> 
> Besides this, we get broken output from "hwclock".
> 
> root@localhost:~# hwclock
> hwclock: select() to /dev/rtc to wait for clock tick timed out: No such file or directory
> 
> This is due to the fact that call to pl031_alarm_irq_enable(dev, alarm->enabled)
> is removed (from pl031_set_alarm()) in commit c8ff5841a90b, and alarm interrupt
> never gets enabled.
> 
> This commit fixes it by re-introduces the missing
> pl031_alarm_irq_enable(dev, alarm->enabled).
> 
> Fixes: c8ff5841a90b ("rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64")
> 
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
> ---
> This patch is tested on QEMU ARM64 TCG guest
> 
> Without this patch:
> root@localhost:~# echo +10 > /sys/class/rtc/rtc0/wakealarm && sleep 10 && cat /proc/interrupts | grep pl031
> 39:          0          0     GICv2  34 Level     rtc-pl031
> 
> With this patch:
> root@localhost:~# echo +10 > /sys/class/rtc/rtc0/wakealarm && sleep 10 && cat /proc/interrupts | grep pl031
> 39:          1          0     GICv2  34 Level     rtc-pl031
> 
> root@localhost:~# hwclock 
> Thu Aug 13 11:00:06 2020  -1.009351 seconds
> 
> root@localhost:~# echo +30 > /sys/class/rtc/rtc0/wakealarm
> root@localhost:~# echo -n mem > /sys/power/state
> root@localhost:~# hwclock -r
> Thu Aug 13 08:59:14 2020  -1.010357 seconds
> 
> ---
>  drivers/rtc/rtc-pl031.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
> index 40d7450a1ce4..c6b89273feba 100644
> --- a/drivers/rtc/rtc-pl031.c
> +++ b/drivers/rtc/rtc-pl031.c
> @@ -275,6 +275,7 @@ static int pl031_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
>  	struct pl031_local *ldata = dev_get_drvdata(dev);
>  
>  	writel(rtc_tm_to_time64(&alarm->time), ldata->base + RTC_MR);
> +	pl031_alarm_irq_enable(dev, alarm->enabled);
>  
>  	return 0;
>  }
> -- 
> 2.7.4
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] rtc: pl031: enable rtc alarm interrupt again

[Amit Tomer]

On Thu, Aug 13, 2020 at 5:09 PM Alexandre Belloni
<alexandre.belloni@bootlin.com> wrote:
>
> Hi,
>
> Thank you for your patch. However, this is already fixed upstream:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/rtc?id=4df2ef85f0efe44505f511ca5e4455585f53a2da
Sorry,  my mistake.
I checked out from the 5.8 tag, and this patch was missing it seems.

Thanks
-Amit

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel