linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Sumit Gupta <sumitg@nvidia.com>
To: <viresh.kumar@linaro.org>, <rjw@rjwysocki.net>,
	<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<linux-pm@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: ksitaraman@nvidia.com, sumitg@nvidia.com, bbasu@nvidia.com
Subject: [Patch 1/2] cpufreq: tegra194: get consistent cpuinfo_cur_freq
Date: Wed, 16 Sep 2020 22:41:16 +0530	[thread overview]
Message-ID: <1600276277-7290-2-git-send-email-sumitg@nvidia.com> (raw)
In-Reply-To: <1600276277-7290-1-git-send-email-sumitg@nvidia.com>

Frequency returned by 'cpuinfo_cur_freq' using counters is not fixed
and keeps changing slightly. This change returns a consistent value
from freq_table. If the reconstructed frequency has acceptable delta
from the last written value, then return the frequency corresponding
to the last written ndiv value from freq_table. Otherwise, print a
warning and return the reconstructed freq.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
---
 drivers/cpufreq/tegra194-cpufreq.c | 66 ++++++++++++++++++++++++++++++++------
 1 file changed, 57 insertions(+), 9 deletions(-)

diff --git a/drivers/cpufreq/tegra194-cpufreq.c b/drivers/cpufreq/tegra194-cpufreq.c
index e1d931c..d5b608d 100644
--- a/drivers/cpufreq/tegra194-cpufreq.c
+++ b/drivers/cpufreq/tegra194-cpufreq.c
@@ -180,9 +180,65 @@ static unsigned int tegra194_get_speed_common(u32 cpu, u32 delay)
 	return (rate_mhz * KHZ); /* in KHz */
 }
 
+static void get_cpu_ndiv(void *ndiv)
+{
+	u64 ndiv_val;
+
+	asm volatile("mrs %0, s3_0_c15_c0_4" : "=r" (ndiv_val) : );
+
+	*(u64 *)ndiv = ndiv_val;
+}
+
+static void set_cpu_ndiv(void *data)
+{
+	struct cpufreq_frequency_table *tbl = data;
+	u64 ndiv_val = (u64)tbl->driver_data;
+
+	asm volatile("msr s3_0_c15_c0_4, %0" : : "r" (ndiv_val));
+}
+
 static unsigned int tegra194_get_speed(u32 cpu)
 {
-	return tegra194_get_speed_common(cpu, US_DELAY);
+	struct cpufreq_frequency_table *table, *pos;
+	struct cpufreq_policy policy;
+	unsigned int rate;
+	u64 ndiv;
+	int err;
+
+	cpufreq_get_policy(&policy, cpu);
+	table = policy.freq_table;
+
+	/* reconstruct actual cpu freq using counters*/
+	rate = tegra194_get_speed_common(cpu, US_DELAY);
+
+	/* get last written ndiv value*/
+	err = smp_call_function_single(cpu, get_cpu_ndiv, &ndiv, true);
+	if (err) {
+		pr_err("cpufreq: Failed to get ndiv for CPU%d, ret:%d\n",
+		       cpu, err);
+		return rate;
+	}
+
+	/* if the reconstructed frequency has acceptable delta from
+	 * the last written value, then return freq corresponding
+	 * to the last written ndiv value from freq_table. This is
+	 * done to return consistent value.
+	 */
+	cpufreq_for_each_valid_entry(pos, table) {
+		if (pos->driver_data != ndiv)
+			continue;
+
+		if (abs(pos->frequency - rate) > 115200) {
+			pr_warn("cpufreq: high delta (%d) on CPU%d\n",
+				abs(pos->frequency - rate), cpu);
+			pr_warn("cpufreq: cur:%u, set:%u, set ndiv:%llu\n",
+				rate, pos->frequency, ndiv);
+		} else {
+			rate = pos->frequency;
+		}
+		break;
+	}
+	return rate;
 }
 
 static int tegra194_cpufreq_init(struct cpufreq_policy *policy)
@@ -209,14 +265,6 @@ static int tegra194_cpufreq_init(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void set_cpu_ndiv(void *data)
-{
-	struct cpufreq_frequency_table *tbl = data;
-	u64 ndiv_val = (u64)tbl->driver_data;
-
-	asm volatile("msr s3_0_c15_c0_4, %0" : : "r" (ndiv_val));
-}
-
 static int tegra194_cpufreq_set_target(struct cpufreq_policy *policy,
 				       unsigned int index)
 {
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-09-16 17:12 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-16 17:11 [Patch 0/2] Tegra194 cpufreq driver misc changes Sumit Gupta
2020-09-16 17:11 ` Sumit Gupta [this message]
2020-09-17  8:36   ` [Patch 1/2] cpufreq: tegra194: get consistent cpuinfo_cur_freq Jon Hunter
2020-09-17  8:44     ` Jon Hunter
2020-09-23  8:34       ` Jon Hunter
2020-10-05  4:34     ` Viresh Kumar
2020-10-05  9:12       ` Jon Hunter
2020-09-24  8:56   ` Thierry Reding
2020-10-05  4:46   ` Viresh Kumar
2020-10-05 18:40     ` Sumit Gupta
2020-09-16 17:11 ` [Patch 2/2] cpufreq: tegra194: Fix unlisted boot freq warning Sumit Gupta
2020-09-17  8:38   ` Jon Hunter
2020-09-17  8:45     ` Jon Hunter
2020-09-24  8:56   ` Thierry Reding
2020-10-05  4:54   ` Viresh Kumar
2020-10-05 18:54     ` Sumit Gupta
2020-10-06  5:38       ` Viresh Kumar
2020-10-08 11:11         ` Sumit Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1600276277-7290-2-git-send-email-sumitg@nvidia.com \
    --to=sumitg@nvidia.com \
    --cc=bbasu@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=ksitaraman@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=thierry.reding@gmail.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).