* [PATCH] firmware: imx: always export scu symbols
@ 2020-10-14 8:57 Joakim Zhang
2020-10-15 1:33 ` Liu Ying
0 siblings, 1 reply; 3+ messages in thread
From: Joakim Zhang @ 2020-10-14 8:57 UTC (permalink / raw)
To: shawnguo, s.hauer
Cc: Peng Fan, Liu Ying, linux-kernel, Joakim Zhang, linux-imx, kernel,
festevam, linux-arm-kernel
From: Liu Ying <victor.liu@nxp.com>
Always export scu symbols for both SCU SoCs and non-SCU SoCs to avoid
build error.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
include/linux/firmware/imx/ipc.h | 15 +++++++++++++++
include/linux/firmware/imx/svc/misc.h | 23 +++++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/include/linux/firmware/imx/ipc.h b/include/linux/firmware/imx/ipc.h
index 891057434858..300fa253fc30 100644
--- a/include/linux/firmware/imx/ipc.h
+++ b/include/linux/firmware/imx/ipc.h
@@ -34,6 +34,7 @@ struct imx_sc_rpc_msg {
uint8_t func;
};
+#if IS_ENABLED(CONFIG_IMX_SCU)
/*
* This is an function to send an RPC message over an IPC channel.
* It is called by client-side SCFW API function shims.
@@ -55,4 +56,18 @@ int imx_scu_call_rpc(struct imx_sc_ipc *ipc, void *msg, bool have_resp);
* @return Returns an error code (0 = success, failed if < 0)
*/
int imx_scu_get_handle(struct imx_sc_ipc **ipc);
+
+#else
+static inline int
+imx_scu_call_rpc(struct imx_sc_ipc *ipc, void *msg, bool have_resp)
+{
+ return -EIO;
+}
+
+static inline int imx_scu_get_handle(struct imx_sc_ipc **ipc)
+{
+ return -EIO;
+}
+#endif
+
#endif /* _SC_IPC_H */
diff --git a/include/linux/firmware/imx/svc/misc.h b/include/linux/firmware/imx/svc/misc.h
index 031dd4d3c766..d255048f17de 100644
--- a/include/linux/firmware/imx/svc/misc.h
+++ b/include/linux/firmware/imx/svc/misc.h
@@ -46,6 +46,7 @@ enum imx_misc_func {
* Control Functions
*/
+#if IS_ENABLED(CONFIG_IMX_SCU)
int imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
u8 ctrl, u32 val);
@@ -55,4 +56,26 @@ int imx_sc_misc_get_control(struct imx_sc_ipc *ipc, u32 resource,
int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32 resource,
bool enable, u64 phys_addr);
+#else
+static inline int
+imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
+ u8 ctrl, u32 val)
+{
+ return -EIO;
+}
+
+static inline int
+imx_sc_misc_get_control(struct imx_sc_ipc *ipc, u32 resource,
+ u8 ctrl, u32 *val)
+{
+ return -EIO;
+}
+
+static inline int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32 resource,
+ bool enable, u64 phys_addr)
+{
+ return -EIO;
+}
+#endif
+
#endif /* _SC_MISC_API_H */
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] firmware: imx: always export scu symbols
2020-10-14 8:57 [PATCH] firmware: imx: always export scu symbols Joakim Zhang
@ 2020-10-15 1:33 ` Liu Ying
2020-10-15 3:17 ` Joakim Zhang
0 siblings, 1 reply; 3+ messages in thread
From: Liu Ying @ 2020-10-15 1:33 UTC (permalink / raw)
To: Joakim Zhang, shawnguo, s.hauer
Cc: Peng Fan, linux-kernel, linux-imx, kernel, festevam,
linux-arm-kernel
Hi Joakim,
On Wed, 2020-10-14 at 16:57 +0800, Joakim Zhang wrote:
> From: Liu Ying <victor.liu@nxp.com>
>
> Always export scu symbols for both SCU SoCs and non-SCU SoCs to avoid
> build error.
s/scu/SCU/
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
> include/linux/firmware/imx/ipc.h | 15 +++++++++++++++
> include/linux/firmware/imx/svc/misc.h | 23 +++++++++++++++++++++++
> 2 files changed, 38 insertions(+)
>
> diff --git a/include/linux/firmware/imx/ipc.h
> b/include/linux/firmware/imx/ipc.h
> index 891057434858..300fa253fc30 100644
> --- a/include/linux/firmware/imx/ipc.h
> +++ b/include/linux/firmware/imx/ipc.h
> @@ -34,6 +34,7 @@ struct imx_sc_rpc_msg {
> uint8_t func;
> };
>
> +#if IS_ENABLED(CONFIG_IMX_SCU)
> /*
> * This is an function to send an RPC message over an IPC channel.
> * It is called by client-side SCFW API function shims.
> @@ -55,4 +56,18 @@ int imx_scu_call_rpc(struct imx_sc_ipc *ipc, void
> *msg, bool have_resp);
> * @return Returns an error code (0 = success, failed if < 0)
> */
> int imx_scu_get_handle(struct imx_sc_ipc **ipc);
> +
> +#else
> +static inline int
> +imx_scu_call_rpc(struct imx_sc_ipc *ipc, void *msg, bool have_resp)
> +{
> + return -EIO;
> +}
> +
> +static inline int imx_scu_get_handle(struct imx_sc_ipc **ipc)
> +{
> + return -EIO;
> +}
> +#endif
> +
> #endif /* _SC_IPC_H */
> diff --git a/include/linux/firmware/imx/svc/misc.h
> b/include/linux/firmware/imx/svc/misc.h
> index 031dd4d3c766..d255048f17de 100644
> --- a/include/linux/firmware/imx/svc/misc.h
> +++ b/include/linux/firmware/imx/svc/misc.h
> @@ -46,6 +46,7 @@ enum imx_misc_func {
> * Control Functions
> */
>
> +#if IS_ENABLED(CONFIG_IMX_SCU)
> int imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
> u8 ctrl, u32 val);
>
> @@ -55,4 +56,26 @@ int imx_sc_misc_get_control(struct imx_sc_ipc
> *ipc, u32 resource,
> int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32 resource,
> bool enable, u64 phys_addr);
>
> +#else
> +static inline int
> +imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
> + u8 ctrl, u32 val)
> +{
> + return -EIO;
> +}
> +
> +static inline int
> +imx_sc_misc_get_control(struct imx_sc_ipc *ipc, u32 resource,
> + u8 ctrl, u32 *val)
> +{
> + return -EIO;
> +}
> +
> +static inline int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32
> resource,
> + bool enable, u64 phys_addr)
> +{
> + return -EIO;
> +}
> +#endif
> +
> #endif /* _SC_MISC_API_H */
This is done in our downstream tree. I did this because a downstream
display driver covers SoCs w/wo SCU. For upstream, I find the drivers
can be splited so that this is not needed.
Do you see any existing upstream driver covers SoCs w/wo SCU?
I think this can be introduced together with the first that kink of
driver.
--
Liu Ying
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread* RE: [PATCH] firmware: imx: always export scu symbols
2020-10-15 1:33 ` Liu Ying
@ 2020-10-15 3:17 ` Joakim Zhang
0 siblings, 0 replies; 3+ messages in thread
From: Joakim Zhang @ 2020-10-15 3:17 UTC (permalink / raw)
To: Ying Liu, shawnguo@kernel.org, s.hauer@pengutronix.de,
Marc Kleine-Budde
Cc: Peng Fan, linux-kernel@vger.kernel.org, dl-linux-imx,
kernel@pengutronix.de, festevam@gmail.com,
linux-arm-kernel@lists.infradead.org
Hi Ying,
> -----Original Message-----
> From: Ying Liu <victor.liu@nxp.com>
> Sent: 2020年10月15日 9:33
> To: Joakim Zhang <qiangqing.zhang@nxp.com>; shawnguo@kernel.org;
> s.hauer@pengutronix.de
> Cc: kernel@pengutronix.de; festevam@gmail.com; dl-linux-imx
> <linux-imx@nxp.com>; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; Peng Fan <peng.fan@nxp.com>
> Subject: Re: [PATCH] firmware: imx: always export scu symbols
>
> Hi Joakim,
>
> On Wed, 2020-10-14 at 16:57 +0800, Joakim Zhang wrote:
> > From: Liu Ying <victor.liu@nxp.com>
> >
> > Always export scu symbols for both SCU SoCs and non-SCU SoCs to avoid
> > build error.
>
> s/scu/SCU/
OK.
> >
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> > ---
> > include/linux/firmware/imx/ipc.h | 15 +++++++++++++++
> > include/linux/firmware/imx/svc/misc.h | 23 +++++++++++++++++++++++
> > 2 files changed, 38 insertions(+)
> >
> > diff --git a/include/linux/firmware/imx/ipc.h
> > b/include/linux/firmware/imx/ipc.h
> > index 891057434858..300fa253fc30 100644
> > --- a/include/linux/firmware/imx/ipc.h
> > +++ b/include/linux/firmware/imx/ipc.h
> > @@ -34,6 +34,7 @@ struct imx_sc_rpc_msg {
> > uint8_t func;
> > };
> >
> > +#if IS_ENABLED(CONFIG_IMX_SCU)
> > /*
> > * This is an function to send an RPC message over an IPC channel.
> > * It is called by client-side SCFW API function shims.
> > @@ -55,4 +56,18 @@ int imx_scu_call_rpc(struct imx_sc_ipc *ipc, void
> > *msg, bool have_resp);
> > * @return Returns an error code (0 = success, failed if < 0)
> > */
> > int imx_scu_get_handle(struct imx_sc_ipc **ipc);
> > +
> > +#else
> > +static inline int
> > +imx_scu_call_rpc(struct imx_sc_ipc *ipc, void *msg, bool have_resp) {
> > + return -EIO;
> > +}
> > +
> > +static inline int imx_scu_get_handle(struct imx_sc_ipc **ipc) {
> > + return -EIO;
> > +}
> > +#endif
> > +
> > #endif /* _SC_IPC_H */
> > diff --git a/include/linux/firmware/imx/svc/misc.h
> > b/include/linux/firmware/imx/svc/misc.h
> > index 031dd4d3c766..d255048f17de 100644
> > --- a/include/linux/firmware/imx/svc/misc.h
> > +++ b/include/linux/firmware/imx/svc/misc.h
> > @@ -46,6 +46,7 @@ enum imx_misc_func {
> > * Control Functions
> > */
> >
> > +#if IS_ENABLED(CONFIG_IMX_SCU)
> > int imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
> > u8 ctrl, u32 val);
> >
> > @@ -55,4 +56,26 @@ int imx_sc_misc_get_control(struct imx_sc_ipc *ipc,
> > u32 resource, int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32
> > resource,
> > bool enable, u64 phys_addr);
> >
> > +#else
> > +static inline int
> > +imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
> > + u8 ctrl, u32 val)
> > +{
> > + return -EIO;
> > +}
> > +
> > +static inline int
> > +imx_sc_misc_get_control(struct imx_sc_ipc *ipc, u32 resource,
> > + u8 ctrl, u32 *val)
> > +{
> > + return -EIO;
> > +}
> > +
> > +static inline int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32
> > resource,
> > + bool enable, u64 phys_addr) {
> > + return -EIO;
> > +}
> > +#endif
> > +
> > #endif /* _SC_MISC_API_H */
>
> This is done in our downstream tree. I did this because a downstream display
> driver covers SoCs w/wo SCU. For upstream, I find the drivers can be splited so
> that this is not needed.
>
> Do you see any existing upstream driver covers SoCs w/wo SCU?
Yes, FlexCAN driver covers SoCs w/wo SCU, so I need this patch to avoid adding IS_ENABLED(CONFIG_IMX_SCU) in FlexCAN driver.
> I think this can be introduced together with the first that kink of driver.
Ok, it seems better, thanks.
Best Regards,
Joakim Zhang
> --
> Liu Ying
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-10-15 3:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-10-14 8:57 [PATCH] firmware: imx: always export scu symbols Joakim Zhang
2020-10-15 1:33 ` Liu Ying
2020-10-15 3:17 ` Joakim Zhang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).