[PATCH 1/2] ARM: DT: Exynos5250: fix number of interrupt-cells in mct node

Chander Kashyap
2013-08-28T12:42:47Z

Two cells were used to specify interrupts in mct node, while second cell
always remains unused. Hence use only one cell.
Suggested by Tomasz Figa.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
---
arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index ef57277..f2f178a 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -102,23 +102,22 @@
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-controller;
- #interrups-cells = <2>;
+ #interrups-cells = <1>;
interrupt-parent = <&mct_map>;
- interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
- <4 0>, <5 0>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
clocks = <&clock 1>, <&clock 335>;
clock-names = "fin_pll", "mct";

mct_map: mct-map {
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = <0x0 0 &combiner 23 3>,
- <0x1 0 &combiner 23 4>,
- <0x2 0 &combiner 25 2>,
- <0x3 0 &combiner 25 3>,
- <0x4 0 &gic 0 120 0>,
- <0x5 0 &gic 0 121 0>;
+ interrupt-map = <0 &combiner 23 3>,
+ <1 &combiner 23 4>,
+ <2 &combiner 25 2>,
+ <3 &combiner 25 3>,
+ <4 &gic 0 120 0>,
+ <5 &gic 0 121 0>;
};
};

--
1.7.9.5