From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko =?ISO-8859-1?Q?St=FCbner?=) Date: Sun, 02 Aug 2015 23:43:12 +0200 Subject: [PATCH 1/3] ARM: dts: rockchip: set correct dwc2 params for cortex-a9 socs Message-ID: <1617149.AMXNNUATDo@diego> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org According to the manual, the fifo sizes are the same as on later socs like the rk3288 and this also fixes an error about "insufficient fifo memory", as it seems the values read from the ip are wrong. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3xxx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index a2ae9f3..c571ac8 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -172,6 +172,11 @@ interrupts = ; clocks = <&cru HCLK_OTG0>; clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <275>; + g-tx-fifo-size = <256 128 128 64 64 32>; + g-use-dma; status = "disabled"; }; @@ -181,6 +186,7 @@ interrupts = ; clocks = <&cru HCLK_OTG1>; clock-names = "otg"; + dr_mode = "host"; status = "disabled"; }; -- 2.1.4