Re: [SPAM]Re: [SPAM][v2,PATCH 3/3] drm/mediatek: dpi: add bus format negotiation

[CK Hu <ck.hu@mediatek.com>]

Hi, Rex:

On Thu, 2021-04-15 at 14:14 +0800, Rex-BC Chen wrote:
> On Thu, 2021-04-15 at 09:09 +0800, CK Hu wrote:
> Hello CK,
> > Hi, Rex:
> > 
> > On Wed, 2021-04-14 at 21:35 +0800, Rex-BC Chen wrote:
> > > Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate
> > > the possible output and input formats for the current mode and monitor,
> > > and use the negotiated formats in a basic atomic_check callback.
> > > 
> > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
> > > ---
> > >  drivers/gpu/drm/mediatek/mtk_dpi.c | 89 ++++++++++++++++++++++++++++--
> > >  1 file changed, 84 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > index 76431fe849b8..b4e9c6c8d706 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> > >  	return 0;
> > >  }
> > >  
> > > +#define MAX_OUTPUT_SEL_FORMATS	2
> > > +
> > > +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
> > > +					struct drm_bridge_state *bridge_state,
> > > +					struct drm_crtc_state *crtc_state,
> > > +					struct drm_connector_state *conn_state,
> > > +					unsigned int *num_output_fmts)
> > > +{
> > > +	struct drm_display_mode *mode = &crtc_state->mode;
> > > +	u32 *output_fmts;
> > > +	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> > > +
> > > +	*num_output_fmts = 0;
> > > +
> > > +	output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts),
> > > +			      GFP_KERNEL);
> > > +	if (!output_fmts)
> > > +		return NULL;
> > > +
> > > +	/* Default 8bit RGB fallback */
> > > +	if (dpi->conf->dual_edge) {
> > > +		output_fmts[0] =  MEDIA_BUS_FMT_RGB888_2X12_LE;
> > > +		output_fmts[1] =  MEDIA_BUS_FMT_RGB888_2X12_BE;
> > 
> > MT8183 does not support MEDIA_BUS_FMT_RGB888_1X24?
> > 
> > Regards,
> > CK
> > 
> Yes, MT8183 only support MEDIA_BUS_FMT_RGB888_1X24

I'm confused with this answer. dpi->conf->dual_edge is true only in
mt8183, but you say 'MT8183 only support MEDIA_BUS_FMT_RGB888_1X24',
your answer looks conflict with these code.

Regards,
CK

> 
> BRs,
> Rex-BC
> > > +		*num_output_fmts = 2;
> > > +	} else {
> > > +		output_fmts[0] =  MEDIA_BUS_FMT_RGB888_1X24;
> > > +		*num_output_fmts = 1;
> > > +	}
> > > +
> > > +	return output_fmts;
> > > +}
> > > +
> > > +#define MAX_INPUT_SEL_FORMATS	1
> > > +
> > > +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> > > +					struct drm_bridge_state *bridge_state,
> > > +					struct drm_crtc_state *crtc_state,
> > > +					struct drm_connector_state *conn_state,
> > > +					u32 output_fmt,
> > > +					unsigned int *num_input_fmts)
> > > +{
> > > +	u32 *input_fmts;
> > > +
> > > +	*num_input_fmts = 0;
> > > +
> > > +	input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> > > +			     GFP_KERNEL);
> > > +	if (!input_fmts)
> > > +		return NULL;
> > > +
> > > +	*num_input_fmts = 1;
> > > +	input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> > > +
> > > +	return input_fmts;
> > > +}
> > > +
> > > +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
> > > +				       struct drm_bridge_state *bridge_state,
> > > +				       struct drm_crtc_state *crtc_state,
> > > +				       struct drm_connector_state *conn_state)
> > > +{
> > > +	struct mtk_dpi *dpi = bridge->driver_private;
> > > +	unsigned int out_bus_format;
> > > +
> > > +	out_bus_format = bridge_state->output_bus_cfg.format;
> > > +
> > > +	dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
> > > +		bridge_state->input_bus_cfg.format,
> > > +		bridge_state->output_bus_cfg.format);
> > > +
> > > +	dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ?
> > > +		 		true : false;
> > > +
> > > +	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> > > +	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> > > +	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> > > +	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > >  static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
> > >  				 enum drm_bridge_attach_flags flags)
> > >  {
> > > @@ -574,6 +655,9 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
> > >  	.mode_set = mtk_dpi_bridge_mode_set,
> > >  	.disable = mtk_dpi_bridge_disable,
> > >  	.enable = mtk_dpi_bridge_enable,
> > > +	.atomic_check = mtk_dpi_bridge_atomic_check,
> > > +	.atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts,
> > > +	.atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts,
> > >  };
> > >  
> > >  void mtk_dpi_start(struct device *dev)
> > > @@ -620,11 +704,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
> > >  	}
> > >  	drm_connector_attach_encoder(dpi->connector, &dpi->encoder);
> > >  
> > > -	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> > > -	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> > > -	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> > > -	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> > > -
> > >  	return 0;
> > >  
> > >  err_cleanup:
> > 
> > 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> https://urldefense.com/v3/__http://lists.infradead.org/mailman/listinfo/linux-mediatek__;!!CTRNKA9wMg0ARbw!wSbSRrRV87zBpi29W3qMJC0hPE5QwMj2oVUgPcq4538Poo-n0KFyM14woxJZbA$ 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel