From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko =?ISO-8859-1?Q?St=FCbner?=) Date: Sat, 24 Oct 2015 14:26:21 +0200 Subject: [PATCH 0/4] Patches to fix remote wakeup on rk3288 dwc2 "host" port In-Reply-To: <1445624891-31680-1-git-send-email-dianders@chromium.org> References: <1445624891-31680-1-git-send-email-dianders@chromium.org> Message-ID: <1633226.9pFzvpSks6@diego> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Am Freitag, 23. Oktober 2015, 11:28:07 schrieb Douglas Anderson: > The "host1" port (AKA the dwc2 port that isn't the OTG port) on rk3288 > has a hardware errata that causes everything to get confused when we get > a remote wakeup. It appears that the "port reset" bit that's in the USB > phy (located in the rk3288 GRF) fixes things up and appears safe to do. > > This series of patches exports the "port reset" from the PHY and then > hooks it up to dwc2 through a quirk. > > I've tested this series atop a bit of a conglomeration of Heiko's github > "somewhat stable" branch (v4.3-rc3-876-g6509232) but with Greg KH's > usb-next merged in. I've been involved in the earlier revisions already, so this version already implements the review-comments I had. I've also gave this a spin on 4.3-rc6 with usb-next merged in on a rk3288-firefly, so Reviewed-by: Heiko Stuebner Tested-by: Heiko Stuebner If the first two patches get picked up, I'll pick the two dts patches afterwards. Thanks Heiko