From: dillon.minfei@gmail.com
To: mchehab@kernel.org, mchehab+huawei@kernel.org,
hverkuil-cisco@xs4all.nl, ezequiel@collabora.com,
gnurou@gmail.com, pihsun@chromium.org, mcoquelin.stm32@gmail.com,
alexandre.torgue@foss.st.com, mturquette@baylibre.com,
sboyd@kernel.org, robh+dt@kernel.org, gabriel.fernandez@st.com,
gabriel.fernandez@foss.st.com
Cc: patrice.chotard@foss.st.com, hugues.fruchet@foss.st.com,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, Dillon Min <dillon.minfei@gmail.com>
Subject: [PATCH v5 08/10] media: v4l2-ctrls: Add RGB color effects control
Date: Mon, 18 Oct 2021 13:04:46 +0800 [thread overview]
Message-ID: <1634533488-25334-9-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1634533488-25334-1-git-send-email-dillon.minfei@gmail.com>
From: Dillon Min <dillon.minfei@gmail.com>
Add V4L2_COLORFX_SET_RGB color effects control, V4L2_CID_COLORFX_RGB
for RGB color setting.
with two mirror changes:
- change 0xFFFFFF to 0xffffff
- fix comments 2^24 to 2^24 - 1
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
---
v5:
- change 0xFFFFFF to 0xffffff.
- change 2^24 to 2^24 -1.
Documentation/userspace-api/media/v4l/control.rst | 9 +++++++++
drivers/media/v4l2-core/v4l2-ctrls-defs.c | 6 ++++--
include/uapi/linux/v4l2-controls.h | 4 +++-
3 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/Documentation/userspace-api/media/v4l/control.rst b/Documentation/userspace-api/media/v4l/control.rst
index f8d0b923da20..3eec65174260 100644
--- a/Documentation/userspace-api/media/v4l/control.rst
+++ b/Documentation/userspace-api/media/v4l/control.rst
@@ -242,8 +242,17 @@ Control IDs
* - ``V4L2_COLORFX_SET_CBCR``
- The Cb and Cr chroma components are replaced by fixed coefficients
determined by ``V4L2_CID_COLORFX_CBCR`` control.
+ * - ``V4L2_COLORFX_SET_RGB``
+ - The RGB components are replaced by the fixed RGB components determined
+ by ``V4L2_CID_COLORFX_RGB`` control.
+``V4L2_CID_COLORFX_RGB`` ``(integer)``
+ Determines the Red, Green, and Blue coefficients for
+ ``V4L2_COLORFX_SET_RGB`` color effect.
+ Bits [7:0] of the supplied 32 bit value are interpreted as Blue component,
+ bits [15:8] as Green component, bits [23:16] as Red component, and
+ bits [31:24] must be zero.
``V4L2_CID_COLORFX_CBCR`` ``(integer)``
Determines the Cb and Cr coefficients for ``V4L2_COLORFX_SET_CBCR``
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
index 0cb6c0f18b39..6f00f8e4b4a6 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
@@ -785,6 +785,7 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT: return "Min Number of Output Buffers";
case V4L2_CID_ALPHA_COMPONENT: return "Alpha Component";
case V4L2_CID_COLORFX_CBCR: return "Color Effects, CbCr";
+ case V4L2_CID_COLORFX_RGB: return "Color Effects, RGB";
/*
* Codec controls
@@ -1394,11 +1395,12 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
*min = *max = *step = *def = 0;
break;
case V4L2_CID_BG_COLOR:
+ case V4L2_CID_COLORFX_RGB:
*type = V4L2_CTRL_TYPE_INTEGER;
*step = 1;
*min = 0;
- /* Max is calculated as RGB888 that is 2^24 */
- *max = 0xFFFFFF;
+ /* Max is calculated as RGB888 that is 2^24 -1 */
+ *max = 0xffffff;
break;
case V4L2_CID_COLORFX_CBCR:
*type = V4L2_CTRL_TYPE_INTEGER;
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 133e20444939..00bb181b56cc 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -128,6 +128,7 @@ enum v4l2_colorfx {
V4L2_COLORFX_SOLARIZATION = 13,
V4L2_COLORFX_ANTIQUE = 14,
V4L2_COLORFX_SET_CBCR = 15,
+ V4L2_COLORFX_SET_RGB = 16,
};
#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33)
@@ -145,9 +146,10 @@ enum v4l2_colorfx {
#define V4L2_CID_ALPHA_COMPONENT (V4L2_CID_BASE+41)
#define V4L2_CID_COLORFX_CBCR (V4L2_CID_BASE+42)
+#define V4L2_CID_COLORFX_RGB (V4L2_CID_BASE+43)
/* last CID + 1 */
-#define V4L2_CID_LASTP1 (V4L2_CID_BASE+43)
+#define V4L2_CID_LASTP1 (V4L2_CID_BASE+44)
/* USER-class private control IDs */
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-10-18 5:09 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-18 5:04 [PATCH v5 00/10] Add support for DMA2D of STMicroelectronics STM32 Soc series dillon.minfei
2021-10-18 5:04 ` [PATCH v5 01/10] media: admin-guide: add stm32-dma2d description dillon.minfei
2021-10-18 5:04 ` [PATCH v5 02/10] media: dt-bindings: media: add document for STM32 DMA2d bindings dillon.minfei
2021-10-18 5:04 ` [PATCH v5 03/10] ARM: dts: stm32: Add DMA2D support for STM32F429 series soc dillon.minfei
2021-10-18 5:04 ` [PATCH v5 04/10] ARM: dts: stm32: Enable DMA2D on STM32F469-DISCO board dillon.minfei
2021-10-18 5:04 ` [PATCH v5 05/10] media: v4l2-mem2mem: add v4l2_m2m_get_unmapped_area for no-mmu platform dillon.minfei
2021-10-18 5:04 ` [PATCH v5 06/10] media: videobuf2: Fix the size printk format dillon.minfei
2021-10-18 5:04 ` [PATCH v5 07/10] media: v4l2-ctrls: Add V4L2_CID_COLORFX_CBCR max setting dillon.minfei
2021-10-18 5:04 ` dillon.minfei [this message]
2021-10-18 5:04 ` [PATCH v5 09/10] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell dillon.minfei
2021-10-18 9:37 ` Hans Verkuil
2021-10-18 9:58 ` Dillon Min
2021-10-18 5:04 ` [PATCH v5 10/10] media: stm32-dma2d: STM32 DMA2D driver dillon.minfei
2021-10-18 9:30 ` Hans Verkuil
2021-10-18 10:25 ` Dillon Min
2021-10-19 2:30 ` Dillon Min
2021-10-19 7:20 ` Hans Verkuil
2021-10-25 19:37 ` [PATCH v5 00/10] Add support for DMA2D of STMicroelectronics STM32 Soc series Nicolas Dufresne
2021-10-25 22:20 ` Dillon Min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1634533488-25334-9-git-send-email-dillon.minfei@gmail.com \
--to=dillon.minfei@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.com \
--cc=gabriel.fernandez@foss.st.com \
--cc=gabriel.fernandez@st.com \
--cc=gnurou@gmail.com \
--cc=hugues.fruchet@foss.st.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mchehab+huawei@kernel.org \
--cc=mchehab@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@baylibre.com \
--cc=patrice.chotard@foss.st.com \
--cc=pihsun@chromium.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).