linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: linux-sunxi@googlegroups.com, clabbe.montjoie@gmail.com
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, mripard@kernel.org, wens@csie.org,
	robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [linux-sunxi] [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board
Date: Mon, 12 Aug 2019 12:56:56 +0200	[thread overview]
Message-ID: <1648748.TWHgARQioU@jernej-laptop> (raw)
In-Reply-To: <20190808084253.10573-1-clabbe.montjoie@gmail.com>

Dne četrtek, 08. avgust 2019 ob 10:42:53 CEST je Corentin Labbe napisal(a):
> This patch adds the evaluation variant of the model A of the PineH64.
> The model A has the same size of the pine64 and has a PCIE slot.
> 
> The only devicetree difference with current pineH64, is the PHY
> regulator.

I have Model A board which also needs ddc-en-gpios property for HDMI connector 
in order for HDMI to work correctly. Otherwise it will just use 1024x768 
resolution. Can you confirm that?

Best regards,
Jernej

> 
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
>  arch/arm64/boot/dts/allwinner/Makefile        |  1 +
>  .../sun50i-h6-pine-h64-modelA-eval.dts        | 26 +++++++++++++++++++
>  2 files changed, 27 insertions(+)
>  create mode 100644
> arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> 
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile
> b/arch/arm64/boot/dts/allwinner/Makefile index f6db0611cb85..9a02166cbf72
> 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb
> diff --git
> a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts new file
> mode 100644
> index 000000000000..d8ff02747efe
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2019 Corentin Labbe <clabbe.montjoie@gmail.com>
> + */
> +
> +#include "sun50i-h6-pine-h64.dts"
> +
> +/ {
> +	model = "Pine H64 model A evaluation board";
> +	compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6";
> +
> +	reg_gmac_3v3: gmac-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-gmac-3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <100000>;
> +		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +};
> +
> +&emac {
> +	phy-supply = <&reg_gmac_3v3>;
> +};





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-08-12 10:57 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-08  8:42 [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board Corentin Labbe
2019-08-08 14:50 ` [linux-sunxi] " Clément Péron
2019-08-14 13:07   ` Corentin Labbe
2019-08-12  9:40 ` Maxime Ripard
2019-08-14 13:17   ` Corentin Labbe
2019-08-14 13:33     ` Maxime Ripard
2019-08-16  9:35       ` Corentin Labbe
2019-08-16 11:36         ` Maxime Ripard
2019-08-16 11:57           ` Corentin Labbe
2019-08-16 13:52             ` Maxime Ripard
2019-08-16 14:00               ` Corentin Labbe
2019-08-20 13:58                 ` Maxime Ripard
2019-08-21  9:19                   ` Icenowy Zheng
2019-08-12 10:56 ` Jernej Škrabec [this message]
2019-08-14 13:20   ` [linux-sunxi] " Corentin Labbe
2019-08-14 13:28     ` Clément Péron
2019-08-16  9:50       ` Jernej Škrabec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1648748.TWHgARQioU@jernej-laptop \
    --to=jernej.skrabec@gmail.com \
    --cc=clabbe.montjoie@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).