[PATCH v2] usb: typec: tcpci_mt6360: Update for BMC PHY setting

From: cy_huang <u0084500@gmail.com>
To: linux@roeck-us.net, heikki.krogerus@linux.intel.com,
	gregkh@linuxfoundation.org, matthias.bgg@gmail.com
Cc: cy_huang@richtek.com, bryan_huang@richtek.com,
	linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	Fabien Parent <fparent@baylibre.com>,
	stable <stable@vger.kernel.org>
Subject: [PATCH v2] usb: typec: tcpci_mt6360: Update for BMC PHY setting
Date: Tue, 10 May 2022 13:13:00 +0800	[thread overview]
Message-ID: <1652159580-30959-1-git-send-email-u0084500@gmail.com> (raw)

From: ChiYuan Huang <cy_huang@richtek.com>

Update MT6360 BMC PHY Tx/Rx setting for the compatibility.

Macpaul reported this CtoDP cable attention message cannot be received from
MT6360 TCPC. But actually, attention message really sent from UFP_D
device.

After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue.

Below's the detailed TCPM log and DP attention message didn't received from 6360
TCPCI.
[ 1206.367775] Identity: 0000:0000.0000
[ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405
[ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start
[ 1206.447383] PD TX, header: 0x1d6f
[ 1206.449393] PD TX complete, status: 0
[ 1206.454110] PD RX, header: 0x184f [1]
[ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1
[ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished
[ 1206.456873] cc:=4
[ 1206.473100] AMS STRUCTURED_VDMS start
[ 1206.473103] PD TX, header: 0x2f6f
[ 1206.475397] PD TX complete, status: 0
[ 1206.480442] PD RX, header: 0x2a4f [1]
[ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2
[ 1206.483150] AMS STRUCTURED_VDMS finished
[ 1206.483151] cc:=4
[ 1206.505643] AMS STRUCTURED_VDMS start
[ 1206.505646] PD TX, header: 0x216f
[ 1206.507933] PD TX complete, status: 0
[ 1206.512664] PD RX, header: 0x1c4f [1]
[ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1
[ 1206.515460] AMS STRUCTURED_VDMS finished
[ 1206.515461] cc:=4

Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 Type-C driver")
Reported-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Cc: stable <stable@vger.kernel.org>
---
 drivers/usb/typec/tcpm/tcpci_mt6360.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c
index f1bd9e0..8a952ea 100644
--- a/drivers/usb/typec/tcpm/tcpci_mt6360.c
+++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c
@@ -15,6 +15,9 @@
 
 #include "tcpci.h"
 
+#define MT6360_REG_PHYCTRL1	0x80
+#define MT6360_REG_PHYCTRL3	0x82
+#define MT6360_REG_PHYCTRL7	0x86
 #define MT6360_REG_VCONNCTRL1	0x8C
 #define MT6360_REG_MODECTRL2	0x8F
 #define MT6360_REG_SWRESET	0xA0
@@ -22,6 +25,8 @@
 #define MT6360_REG_DRPCTRL1	0xA2
 #define MT6360_REG_DRPCTRL2	0xA3
 #define MT6360_REG_I2CTORST	0xBF
+#define MT6360_REG_PHYCTRL11	0xCA
+#define MT6360_REG_RXCTRL1	0xCE
 #define MT6360_REG_RXCTRL2	0xCF
 #define MT6360_REG_CTDCTRL2	0xEC
 
@@ -106,6 +111,27 @@ static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 	if (ret)
 		return ret;
 
+	/* BMC PHY */
+	ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL1, 0x3A70);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, MT6360_REG_PHYCTRL3,  0x82);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, MT6360_REG_PHYCTRL7, 0x36);
+	if (ret)
+		return ret;
+
+	ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL11, 0x3C60);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(regmap, MT6360_REG_RXCTRL1, 0xE8);
+	if (ret)
+		return ret;
+
 	/* Set shipping mode off, AUTOIDLE on */
 	return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A);
 }
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
