From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4 v5] drm/bridge: Add bindings for TI THS8134
Date: Mon, 18 Dec 2017 10:46:49 +0200 [thread overview]
Message-ID: <1661312.kCzA9cG53b@avalon> (raw)
In-Reply-To: <20171215121047.3650-2-linus.walleij@linaro.org>
Hello Linus,
Thank you for the patch.
On Friday, 15 December 2017 14:10:44 EET Linus Walleij wrote:
> This adds device tree bindings for the Texas Instruments
> THS8134, THS8134A and THS8134B VGA DACs by extending and
> renaming the existing bindings for THS8135.
>
> These DACs are used for the VGA outputs on the ARM reference
> designs such as Integrator, Versatile and RealView.
>
> Cc: devicetree at vger.kernel.org
> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v2->v5:
> - Dropped the "ti,ths813x" as it turns out we need precise info
> about the sub-variant anyways as they all very in timings.
> - Refine the THS8134 variants, it turns out ths8134, ths8134a
> and ths8134b are three different variants of ths8134.
> ChangeLog v1->v2:
> - Introduce specific-to-general compatible string:
> compatible = "ti,ths8134a", "ti,ths813x";
> so drivers can handle the whole family the same way.
> - Collected Rob's ACK.
> ---
> .../display/bridge/{ti,ths8135.txt => ti,ths813x.txt} | 13 +++++++--
> 1 file changed, 9 insertions(+), 4 deletions(-)
> rename Documentation/devicetree/bindings/display/bridge/{ti,ths8135.txt =>
> ti,ths813x.txt} (69%)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> b/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt
> similarity index 69%
> rename from Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> rename to Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt
> index 6ec1a880ac18..49f155467f00 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt
> @@ -1,11 +1,16 @@
> -THS8135 Video DAC
> ------------------
> +THS8134 and THS8135 Video DAC
> +-----------------------------
>
> -This is the binding for Texas Instruments THS8135 Video DAC bridge.
> +This is the binding for Texas Instruments THS8134, THS8134A, THS8134B and
> +THS8135 Video DAC bridge.
There's more than one no, so s/bridge/bridges/. Or just s/DAC bridge/DACs/ as
bridge refers to the software implementation.
With this and Rob's comment about the compatible string ordering
("ti,ths8134[ab]", "ti,ths8134" instead of "ti,ths8134[ab]", "ti,ths8134"),
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Required properties:
>
> -- compatible: Must be "ti,ths8135"
> +- compatible: Must be one of
> + "ti,ths8134"
> + "ti,ths8134", "ti,ths8134a"
> + "ti,ths8134", "ti,ths8134b"
> + "ti,ths8135"
>
> Required nodes:
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2017-12-18 8:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 12:10 [PATCH 0/4 v5] Support bridge timings Linus Walleij
2017-12-15 12:10 ` [PATCH 1/4 v5] drm/bridge: Add bindings for TI THS8134 Linus Walleij
2017-12-16 18:23 ` Rob Herring
2017-12-18 8:46 ` Laurent Pinchart [this message]
2017-12-15 12:10 ` [PATCH 2/4 v5] drm/bridge: Provide a way to embed timing info in bridges Linus Walleij
2017-12-18 8:51 ` Laurent Pinchart
2017-12-15 12:10 ` [PATCH 3/4 v5] drm/bridge: Add timing support to dumb VGA DAC Linus Walleij
2017-12-18 10:51 ` Laurent Pinchart
2017-12-15 12:10 ` [PATCH 4/4 v5] drm/pl111: Support handling bridge timings Linus Walleij
2017-12-18 10:53 ` Laurent Pinchart
2017-12-15 12:30 ` [PATCH 0/4 v5] Support " Linus Walleij
2017-12-15 15:54 ` Daniel Vetter
2017-12-18 8:43 ` Andrzej Hajda
2017-12-18 11:10 ` Laurent Pinchart
2017-12-18 11:01 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1661312.kCzA9cG53b@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).