From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 10/13] ARM: dts: rockchip: move oscillator input clock into main dtsi
Date: Sun, 22 Jun 2014 22:48:44 +0200 [thread overview]
Message-ID: <1667363.AdZ5ojCAWZ@diego> (raw)
In-Reply-To: <1808429.dNxms7FR7U@diego>
The clock definitions get a lot shorter due to the soc clocks being handled by
rk3188-cru and only the input clock remains. These can not simply live
in the main rk3xxx.dtsi without affecting readability.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3066a-clocks.dtsi | 6 ------
arch/arm/boot/dts/rk3188-clocks.dtsi | 6 ------
arch/arm/boot/dts/rk3xxx.dtsi | 6 ++++++
3 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a-clocks.dtsi b/arch/arm/boot/dts/rk3066a-clocks.dtsi
index 6e307fc..0d4d667 100644
--- a/arch/arm/boot/dts/rk3066a-clocks.dtsi
+++ b/arch/arm/boot/dts/rk3066a-clocks.dtsi
@@ -31,12 +31,6 @@
#clock-cells = <0>;
};
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
dummy48m: dummy48m {
compatible = "fixed-clock";
clock-frequency = <48000000>;
diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi
index b1b92dc..6bc0373 100644
--- a/arch/arm/boot/dts/rk3188-clocks.dtsi
+++ b/arch/arm/boot/dts/rk3188-clocks.dtsi
@@ -31,12 +31,6 @@
#clock-cells = <0>;
};
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
dummy48m: dummy48m {
compatible = "fixed-clock";
clock-frequency = <48000000>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index b47d5fe..0de3f06 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -26,6 +26,12 @@
compatible = "simple-bus";
ranges;
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
scu at 1013c000 {
compatible = "arm,cortex-a9-scu";
reg = <0x1013c000 0x100>;
--
1.9.0
next prev parent reply other threads:[~2014-06-22 20:48 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-22 20:41 [PATCH v4 00/13] Clock support for rk3066,rk3188 and rk3288 Heiko Stübner
2014-06-22 20:43 ` [PATCH v4 01/13] clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent Heiko Stübner
2014-06-25 7:57 ` Gabriel Fernandez
2014-06-30 22:00 ` [PATCH v4.1 " Heiko Stübner
2014-07-01 9:30 ` [PATCH v4.2 " Heiko Stübner
2014-06-22 20:43 ` [PATCH v4 02/13] clk: composite: allow read-only clocks Heiko Stübner
2014-07-01 20:46 ` Mike Turquette
2014-06-22 20:44 ` [PATCH v4 03/13] clk: rockchip: add basic infrastructure for clock branches Heiko Stübner
2014-07-01 18:45 ` Mike Turquette
2014-06-22 20:44 ` [PATCH v4 04/13] clk: rockchip: add clock type for pll clocks and pll used on rk3066 Heiko Stübner
2014-06-22 20:45 ` [PATCH v4 05/13] clk: rockchip: add reset controller Heiko Stübner
2014-06-22 20:46 ` [PATCH v4 06/13] dt-bindings: add documentation for rk3188 clock and reset unit Heiko Stübner
2014-06-22 20:47 ` [PATCH v4 07/13] clk: rockchip: add clock driver for rk3188 and rk3066 clocks Heiko Stübner
2014-06-22 20:47 ` [PATCH v4 08/13] ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER Heiko Stübner
2014-06-22 20:48 ` [PATCH v4 09/13] ARM: dts: rockchip: add cru nodes and update device clocks to use it Heiko Stübner
2014-06-22 20:48 ` Heiko Stübner [this message]
2014-06-22 20:49 ` [PATCH v4 11/13] arm: dts: rockchip: remove obsolete clock gate definitions Heiko Stübner
2014-06-22 20:49 ` [PATCH v4 12/13] clk: rockchip: add clock controller for rk3288 Heiko Stübner
2014-06-22 20:50 ` [PATCH v4 13/13] dt-bindings: add documentation for rk3288 cru Heiko Stübner
2014-06-29 17:41 ` [PATCH v4 00/13] Clock support for rk3066,rk3188 and rk3288 Max Schwarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1667363.AdZ5ojCAWZ@diego \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).