From: ChiaEn Wu <chiaen_wu@richtek.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <matthias.bgg@gmail.com>,
<angelogioacchino.delregno@collabora.com>
Cc: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>, <peterwu.pub@gmail.com>,
<cy_huang@richtek.com>, ChiaEn Wu <chiaen_wu@richtek.com>
Subject: [PATCH v2] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
Date: Thu, 6 Apr 2023 11:08:51 +0800 [thread overview]
Message-ID: <1680750531-29365-1-git-send-email-chiaen_wu@richtek.com> (raw)
The scale value of ibus and ibat on the datasheet is incorrect due to the
customer report after the experimentation with some specific vendor ID
chips.
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
---
v2:
- Move 'get_vendor_info' after iio_priv allocation done
- For the special case, bypass indent, make it out-of-line
- For a simple return, add a blank line
- Drop else
---
drivers/iio/adc/mt6370-adc.c | 45 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/mt6370-adc.c b/drivers/iio/adc/mt6370-adc.c
index bc62e5a..ae5cdff 100644
--- a/drivers/iio/adc/mt6370-adc.c
+++ b/drivers/iio/adc/mt6370-adc.c
@@ -19,6 +19,7 @@
#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+#define MT6370_REG_DEV_INFO 0x100
#define MT6370_REG_CHG_CTRL3 0x113
#define MT6370_REG_CHG_CTRL7 0x117
#define MT6370_REG_CHG_ADC 0x121
@@ -27,6 +28,7 @@
#define MT6370_ADC_START_MASK BIT(0)
#define MT6370_ADC_IN_SEL_MASK GENMASK(7, 4)
#define MT6370_AICR_ICHG_MASK GENMASK(7, 2)
+#define MT6370_VENID_MASK GENMASK(7, 4)
#define MT6370_AICR_100_mA 0x0
#define MT6370_AICR_150_mA 0x1
@@ -47,6 +49,10 @@
#define ADC_CONV_TIME_MS 35
#define ADC_CONV_POLLING_TIME_US 1000
+#define MT6370_VID_RT5081 0x8
+#define MT6370_VID_RT5081A 0xA
+#define MT6370_VID_MT6370 0xE
+
struct mt6370_adc_data {
struct device *dev;
struct regmap *regmap;
@@ -55,6 +61,7 @@ struct mt6370_adc_data {
* from being read at the same time.
*/
struct mutex adc_lock;
+ unsigned int vid;
};
static int mt6370_adc_read_channel(struct mt6370_adc_data *priv, int chan,
@@ -98,6 +105,22 @@ static int mt6370_adc_read_channel(struct mt6370_adc_data *priv, int chan,
return ret;
}
+static int mt6370_adc_get_ibus_scale(struct mt6370_adc_data *priv)
+{
+ if (priv->vid == MT6370_VID_RT5081 || priv->vid == MT6370_VID_RT5081A || priv->vid == MT6370_VID_MT6370)
+ return 3350;
+
+ return 3875;
+}
+
+static int mt6370_adc_get_ibat_scale(struct mt6370_adc_data *priv)
+{
+ if (priv->vid == MT6370_VID_RT5081 || priv->vid == MT6370_VID_RT5081A || priv->vid == MT6370_VID_MT6370)
+ return 2680;
+
+ return 3870;
+}
+
static int mt6370_adc_read_scale(struct mt6370_adc_data *priv,
int chan, int *val1, int *val2)
{
@@ -123,7 +146,7 @@ static int mt6370_adc_read_scale(struct mt6370_adc_data *priv,
case MT6370_AICR_250_mA:
case MT6370_AICR_300_mA:
case MT6370_AICR_350_mA:
- *val1 = 3350;
+ *val1 = mt6370_adc_get_ibus_scale(priv);
break;
default:
*val1 = 5000;
@@ -150,7 +173,7 @@ static int mt6370_adc_read_scale(struct mt6370_adc_data *priv,
case MT6370_ICHG_600_mA:
case MT6370_ICHG_700_mA:
case MT6370_ICHG_800_mA:
- *val1 = 2680;
+ *val1 = mt6370_adc_get_ibat_scale(priv);
break;
default:
*val1 = 5000;
@@ -251,6 +274,20 @@ static const struct iio_chan_spec mt6370_adc_channels[] = {
MT6370_ADC_CHAN(TEMP_JC, IIO_TEMP, 12, BIT(IIO_CHAN_INFO_OFFSET)),
};
+static int mt6370_get_vendor_info(struct mt6370_adc_data *priv)
+{
+ unsigned int dev_info;
+ int ret;
+
+ ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &dev_info);
+ if (ret)
+ return ret;
+
+ priv->vid = FIELD_GET(MT6370_VENID_MASK, dev_info);
+
+ return 0;
+}
+
static int mt6370_adc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -272,6 +309,10 @@ static int mt6370_adc_probe(struct platform_device *pdev)
priv->regmap = regmap;
mutex_init(&priv->adc_lock);
+ ret = mt6370_get_vendor_info(priv);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get vid\n");
+
ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, 0);
if (ret)
return dev_err_probe(dev, ret, "Failed to reset ADC\n");
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-04-06 3:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-06 3:08 ChiaEn Wu [this message]
2023-04-07 17:29 ` [PATCH v2] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1680750531-29365-1-git-send-email-chiaen_wu@richtek.com \
--to=chiaen_wu@richtek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=cy_huang@richtek.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=peterwu.pub@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox