Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran.bingham@ideasonboard.com>
To: Umang Jain <umang.jain@ideasonboard.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	linux-rpi-kernel@lists.infradead.org,
	linux-staging@lists.linux.dev
Cc: stefan.wahren@i2se.com, gregkh@linuxfoundation.org,
	f.fainelli@gmail.com, athierry@redhat.com, error27@gmail.com,
	dave.stevenson@raspberrypi.com,
	laurent.pinchart@ideasonboard.com,
	Umang Jain <umang.jain@ideasonboard.com>
Subject: Re: [PATCH v8 4/5] staging: bcm2835-audio: Register bcm2835-audio with vchiq_bus_type
Date: Wed, 28 Jun 2023 23:51:43 +0100	[thread overview]
Message-ID: <168799270390.3298351.3592364441774693940@Monstersaurus> (raw)
In-Reply-To: <20230627201628.207483-5-umang.jain@ideasonboard.com>

Quoting Umang Jain (2023-06-27 21:16:27)
> Similar to how bcm2385-camera device is registered, register the
> bcm2835-audio with vchiq_bus_type as well.

bcm2835-audio here and in the dir name, but registered as
bcm2835_audio... Personally I prefer bcm2835-audio ... but this is
already discussed earlier in the series.


> 
> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
> ---
>  .../vc04_services/bcm2835-audio/bcm2835.c       | 17 ++++++++---------
>  .../interface/vchiq_arm/vchiq_arm.c             |  6 +-----
>  2 files changed, 9 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
> index 00bc898b0189..f81a9a4fbd5d 100644
> --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
> +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
> @@ -1,12 +1,12 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /* Copyright 2011 Broadcom Corporation.  All rights reserved. */
>  
> -#include <linux/platform_device.h>
> -
>  #include <linux/init.h>
>  #include <linux/slab.h>
>  #include <linux/module.h>
>  
> +#include "../interface/vchiq_arm/vchiq_arm.h"
> +#include "../interface/vchiq_arm/vchiq_device.h"
>  #include "bcm2835.h"
>  
>  static bool enable_hdmi;
> @@ -268,9 +268,9 @@ static int snd_add_child_devices(struct device *device, u32 numchans)
>         return 0;
>  }
>  
> -static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
> +static int snd_bcm2835_alsa_probe(struct vchiq_device *device)
>  {
> -       struct device *dev = &pdev->dev;
> +       struct device *dev = &device->dev;
>         int err;
>  
>         if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) {
> @@ -292,20 +292,20 @@ static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
>  
>  #ifdef CONFIG_PM
>  
> -static int snd_bcm2835_alsa_suspend(struct platform_device *pdev,
> +static int snd_bcm2835_alsa_suspend(struct vchiq_device *device,
>                                     pm_message_t state)
>  {
>         return 0;
>  }
>  
> -static int snd_bcm2835_alsa_resume(struct platform_device *pdev)
> +static int snd_bcm2835_alsa_resume(struct vchiq_device *device)
>  {
>         return 0;
>  }
>  
>  #endif
>  
> -static struct platform_driver bcm2835_alsa_driver = {
> +static struct vchiq_driver bcm2835_alsa_driver = {
>         .probe = snd_bcm2835_alsa_probe,
>  #ifdef CONFIG_PM
>         .suspend = snd_bcm2835_alsa_suspend,
> @@ -315,9 +315,8 @@ static struct platform_driver bcm2835_alsa_driver = {
>                 .name = "bcm2835_audio",
>         },
>  };
> -module_platform_driver(bcm2835_alsa_driver);
> +module_vchiq_driver(bcm2835_alsa_driver);
>  
>  MODULE_AUTHOR("Dom Cobley");
>  MODULE_DESCRIPTION("Alsa driver for BCM2835 chip");
>  MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:bcm2835_audio");

And same as with the bcm2385-camera ... I expect this might be required
in some form to support module autoloading?

But with that resolved:

Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> index 79d4d0eeb5fb..75da37fa6372 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> @@ -67,8 +67,6 @@ int vchiq_susp_log_level = VCHIQ_LOG_ERROR;
>  DEFINE_SPINLOCK(msg_queue_spinlock);
>  struct vchiq_state g_state;
>  
> -static struct platform_device *bcm2835_audio;
> -
>  struct vchiq_drvdata {
>         const unsigned int cache_line_size;
>         struct rpi_firmware *fw;
> @@ -139,6 +137,7 @@ struct vchiq_pagelist_info {
>   * the interface.
>   */
>  static const char *const vchiq_devices[] = {
> +       "bcm2835_audio",
>         "bcm2835-camera",
>  };
>  
> @@ -1849,8 +1848,6 @@ static int vchiq_probe(struct platform_device *pdev)
>                 goto error_exit;
>         }
>  
> -       bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio");
> -
>         for (i = 0; i < ARRAY_SIZE(vchiq_devices); i++) {
>                 err = vchiq_device_register(&pdev->dev, vchiq_devices[i]);
>                 if (err)
> @@ -1868,7 +1865,6 @@ static int vchiq_probe(struct platform_device *pdev)
>  
>  static void vchiq_remove(struct platform_device *pdev)
>  {
> -       platform_device_unregister(bcm2835_audio);
>         bus_for_each_dev(&vchiq_bus_type, NULL, NULL, vchiq_device_unregister);
>         vchiq_debugfs_deinit();
>         vchiq_deregister_chrdev();
> -- 
> 2.39.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-06-28 22:52 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-27 20:16 [PATCH v8 0/5] staging: vc04_services: vchiq: Register devices with a custom bus_type Umang Jain
2023-06-27 20:16 ` [PATCH v8 1/5] staging: vc04_services: vchiq_arm: Add new bus type and device type Umang Jain
2023-07-03 13:28   ` Greg KH
2023-07-03 16:15     ` Umang Jain
2023-07-03 19:57       ` Greg KH
2023-06-27 20:16 ` [PATCH v8 2/5] staging: vc04_services: vchiq_arm: Register vchiq_bus_type Umang Jain
2023-06-28 11:21   ` Kieran Bingham
2023-06-28 21:08     ` Umang Jain
2023-06-27 20:16 ` [PATCH v8 3/5] staging: bcm2835-camera: Register bcm2835-camera with vchiq_bus_type Umang Jain
2023-06-28 22:44   ` Kieran Bingham
2023-06-29 11:49     ` Umang Jain
2023-06-29 12:19       ` Kieran Bingham
2023-07-03 13:29   ` Greg KH
2023-07-03 14:44     ` Umang Jain
2023-07-03 14:46       ` Greg KH
2023-06-27 20:16 ` [PATCH v8 4/5] staging: bcm2835-audio: Register bcm2835-audio " Umang Jain
2023-06-28 22:51   ` Kieran Bingham [this message]
2023-06-27 20:16 ` [PATCH v8 5/5] staging: vc04_services: vchiq_arm: Remove vchiq_register_child() Umang Jain
2023-06-28 22:46   ` Kieran Bingham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=168799270390.3298351.3592364441774693940@Monstersaurus \
    --to=kieran.bingham@ideasonboard.com \
    --cc=athierry@redhat.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=error27@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=stefan.wahren@i2se.com \
    --cc=umang.jain@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox