Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: randy.li@rock-chips.com (Randy Li)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] drm/rockchip: analogix_dp: add supports for regulators in edp IP
Date: Fri, 28 Oct 2016 17:29:15 +0800	[thread overview]
Message-ID: <16dfbe16-eae7-8da9-4108-07e623210d35@rock-chips.com> (raw)
In-Reply-To: <6d050f06-996f-5ecc-20f9-587299ee34c7@rock-chips.com>



On 10/28/2016 05:11 PM, Shawn Lin wrote:
> On 2016/10/23 3:18, Randy Li wrote:
>> I found if eDP_AVDD_1V0 and eDP_AVDD_1V8 are not been power at
>> RK3288, once trying to enable the pclk clock, the kernel would dead.
>> This patch would try to enable them first. The eDP_AVDD_1V8 more
>> likely to be applied to eDP phy, but I have no time to confirmed
>> it yet.
>
> Comfirm it or at least someone should be able to answer your
> question, Mark?
I just forget to ask the IC department, the TRM didn't cover that.
>
> Have you considered to add some details about vcc-supply and vccio-
> supply for your analogix_dp-rockchip.txt ?
>
> From your commit msg, these two properties are more likely to be
> required but the code itself tell me them should be optional(from the
> point of backward compatibility, it should also be optinoal).
Yes, I keep it optional for the same reason. Most of boards won't turn 
off those power supply and may use some fixed regulators.
>
>>
>> Signed-off-by: Randy Li <ayaka@soulik.info>
>> ---
>>  drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 25
>> +++++++++++++++++++++++++
>>  1 file changed, 25 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> index 8548e82..6bf0441 100644
>> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> @@ -17,6 +17,7 @@
>>  #include <linux/of_device.h>
>>  #include <linux/of_graph.h>
>>  #include <linux/regmap.h>
>> +#include <linux/regulator/consumer.h>
>>  #include <linux/reset.h>
>>  #include <linux/clk.h>
>>
>> @@ -70,6 +71,7 @@ struct rockchip_dp_device {
>>      struct clk               *grfclk;
>>      struct regmap            *grf;
>>      struct reset_control     *rst;
>> +    struct regulator_bulk_data supplies[2];
>>
>>      struct work_struct     psr_work;
>>      spinlock_t         psr_lock;
>> @@ -146,6 +148,13 @@ static int rockchip_dp_poweron(struct
>> analogix_dp_plat_data *plat_data)
>>
>>      cancel_work_sync(&dp->psr_work);
>>
>> +    ret = regulator_bulk_enable(ARRAY_SIZE(dp->supplies),
>> +            dp->supplies);
>> +    if (ret) {
>> +        dev_err(dp->dev, "failed to enable vdd supply %d\n", ret);
>> +        return ret;
>> +    }
>> +
>>      ret = clk_prepare_enable(dp->pclk);
>>      if (ret < 0) {
>>          dev_err(dp->dev, "failed to enable pclk %d\n", ret);
>> @@ -168,6 +177,9 @@ static int rockchip_dp_powerdown(struct
>> analogix_dp_plat_data *plat_data)
>>
>>      clk_disable_unprepare(dp->pclk);
>>
>> +    regulator_bulk_disable(ARRAY_SIZE(dp->supplies),
>> +            dp->supplies);
>> +
>>      return 0;
>>  }
>>
>> @@ -323,6 +335,19 @@ static int rockchip_dp_init(struct
>> rockchip_dp_device *dp)
>>          return PTR_ERR(dp->rst);
>>      }
>>
>> +    dp->supplies[0].supply = "vcc";
>> +    dp->supplies[1].supply = "vccio";
>> +    ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dp->supplies),
>> +            dp->supplies);
>> +    if (ret < 0) {
>> +        dev_err(dev, "failed to get regulators: %d\n", ret);
>> +    }
>> +    ret = regulator_bulk_enable(ARRAY_SIZE(dp->supplies),
>> +            dp->supplies);
>> +    if (ret < 0) {
>> +        dev_err(dev, "failed to enable regulators: %d\n", ret);
>> +    }
>> +
>>      ret = clk_prepare_enable(dp->pclk);
>>      if (ret < 0) {
>>          dev_err(dp->dev, "failed to enable pclk %d\n", ret);
>>
>
>

-- 
Randy Li
The third produce department
===========================================================================
This email message, including any attachments, is for the sole
use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message. [Fuzhou Rockchip Electronics, INC. China mainland]
===========================================================================

  reply	other threads:[~2016-10-28  9:29 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-22 19:18 [PATCH] drm/rockchip: analogix_dp: add supports for regulators in edp IP Randy Li
2016-10-28  9:11 ` Shawn Lin
2016-10-28  9:29   ` Randy Li [this message]
2016-11-09 14:08     ` ayaka
2016-11-09 14:10     ` ayaka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=16dfbe16-eae7-8da9-4108-07e623210d35@rock-chips.com \
    --to=randy.li@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox