From: Judith Mendez <jm@ti.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>, Nishanth Menon <nm@ti.com>,
Santosh Shilimkar <ssantosh@kernel.org>
Cc: <linux-mmc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, Andrew Davis <afd@ti.com>
Subject: Re: [PATCH v2 2/2] mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
Date: Fri, 8 Aug 2025 08:38:08 -0500 [thread overview]
Message-ID: <16fac32a-a42a-4ec8-b0a2-3efe785af728@ti.com> (raw)
In-Reply-To: <20250807225138.1228333-3-jm@ti.com>
Hi all,
On 8/7/25 5:51 PM, Judith Mendez wrote:
> This adds SDHCI_AM654_QUIRK_DISABLE_HS400 quirk which shall be used
> to disable HS400 support. AM62P SR1.0 and SR1.1 do not support HS400
> due to errata i2458 [0] so disable HS400 for these SoC revisions.
>
> [0] https://www.ti.com/lit/er/sprz574a/sprz574a.pdf
> Signed-off-by: Judith Mendez <jm@ti.com>
> ---
> drivers/mmc/host/sdhci_am654.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
> index e4fc345be7e5..dc4975514847 100644
> --- a/drivers/mmc/host/sdhci_am654.c
> +++ b/drivers/mmc/host/sdhci_am654.c
> @@ -156,6 +156,7 @@ struct sdhci_am654_data {
>
> #define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0)
> #define SDHCI_AM654_QUIRK_SUPPRESS_V1P8_ENA BIT(1)
> +#define SDHCI_AM654_QUIRK_DISABLE_HS400 BIT(2)
> };
>
> struct window {
> @@ -765,6 +766,7 @@ static int sdhci_am654_init(struct sdhci_host *host)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
> + struct device *dev = mmc_dev(host->mmc);
> u32 ctl_cfg_2 = 0;
> u32 mask;
> u32 val;
> @@ -820,6 +822,12 @@ static int sdhci_am654_init(struct sdhci_host *host)
> if (ret)
> goto err_cleanup_host;
>
> + if (sdhci_am654->quirks & SDHCI_AM654_QUIRK_DISABLE_HS400 &&
> + host->mmc->caps2 & (MMC_CAP2_HS400 | MMC_CAP2_HS400_ES)) {
> + dev_err(dev, "Disable descoped HS400 mode for this silicon revision\n");
Forgot to switch to dev_info, so will respin the series one more time.
Sorry for the noise.
~ Judith
prev parent reply other threads:[~2025-08-08 13:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-07 22:51 [PATCH v2 0/2] Add support for AM62P SR1.2 Judith Mendez
2025-08-07 22:51 ` [PATCH v2 1/2] soc: ti: k3-socinfo: Add support for AM62P variants Judith Mendez
2025-08-08 13:50 ` Andrew Davis
2025-08-08 14:51 ` Judith Mendez
2025-08-07 22:51 ` [PATCH v2 2/2] mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1 Judith Mendez
2025-08-08 13:38 ` Judith Mendez [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16fac32a-a42a-4ec8-b0a2-3efe785af728@ti.com \
--to=jm@ti.com \
--cc=adrian.hunter@intel.com \
--cc=afd@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=nm@ti.com \
--cc=ssantosh@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox