linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH net-next v18 00/13] Introduce PHY listing and link_topology tracking
@ 2024-08-21 15:09 Maxime Chevallier
  2024-08-21 15:09 ` [PATCH net-next v18 01/13] net: phy: Introduce ethernet link topology representation Maxime Chevallier
                   ` (13 more replies)
  0 siblings, 14 replies; 18+ messages in thread
From: Maxime Chevallier @ 2024-08-21 15:09 UTC (permalink / raw)
  To: davem
  Cc: Maxime Chevallier, netdev, linux-kernel, thomas.petazzoni,
	Andrew Lunn, Jakub Kicinski, Eric Dumazet, Paolo Abeni,
	Russell King, linux-arm-kernel, Christophe Leroy, Herve Codina,
	Florian Fainelli, Heiner Kallweit, Vladimir Oltean,
	Köry Maincent, Jesse Brandeburg, Marek Behún,
	Piergiorgio Beruto, Oleksij Rempel, Nicolò Veronese,
	Simon Horman, mwojtas, Nathan Chancellor, Antoine Tenart,
	Marc Kleine-Budde, Dan Carpenter, Romain Gantois

Hello everyone,

This is V18 of the phy_link_topology series, aiming at improving support
for multiple PHYs being attached to the same MAC.

V18 is a simple rebase of the V17 on top of net-next, gathering the
tested-by and reviewed-by tags from Christophe (thanks !).

This iteration is also one patch shorter than V17 (patch 12/14 in V17 is gone),
as one of the patches used to fix an issue that has now been resolved by
Simon Horman in 

743ff02152bc ethtool: Don't check for NULL info in prepare_data callbacks

As a remainder, here's what the PHY listings would look like :
 - eth0 has a 88x3310 acting as media converter, and an SFP module with
   an embedded 88e1111 PHY
 - eth2 has a 88e1510 PHY

# ethtool --show-phys *

PHY for eth0:
PHY index: 1
Driver name: mv88x3310
PHY device name: f212a600.mdio-mii:00
Downstream SFP bus name: sfp-eth0
Upstream type: MAC

PHY for eth0:
PHY index: 2
Driver name: Marvell 88E1111
PHY device name: i2c:sfp-eth0:16
Upstream type: PHY
Upstream PHY index: 1
Upstream SFP name: sfp-eth0

PHY for eth2:
PHY index: 1
Driver name: Marvell 88E1510
PHY device name: f212a200.mdio-mii:00
Upstream type: MAC

Ethtool patches : https://github.com/minimaxwell/ethtool/tree/mc/topo-v16
(this branch is compatible with this V18 series)

Link to V17: https://lore.kernel.org/netdev/20240709063039.2909536-1-maxime.chevallier@bootlin.com/
Link to V16: https://lore.kernel.org/netdev/20240705132706.13588-1-maxime.chevallier@bootlin.com/
Link to V15: https://lore.kernel.org/netdev/20240703140806.271938-1-maxime.chevallier@bootlin.com/
Link to V14: https://lore.kernel.org/netdev/20240701131801.1227740-1-maxime.chevallier@bootlin.com/
Link to V13: https://lore.kernel.org/netdev/20240607071836.911403-1-maxime.chevallier@bootlin.com/
Link to v12: https://lore.kernel.org/netdev/20240605124920.720690-1-maxime.chevallier@bootlin.com/
Link to v11: https://lore.kernel.org/netdev/20240404093004.2552221-1-maxime.chevallier@bootlin.com/
Link to V10: https://lore.kernel.org/netdev/20240304151011.1610175-1-maxime.chevallier@bootlin.com/
Link to V9: https://lore.kernel.org/netdev/20240228114728.51861-1-maxime.chevallier@bootlin.com/
Link to V8: https://lore.kernel.org/netdev/20240220184217.3689988-1-maxime.chevallier@bootlin.com/
Link to V7: https://lore.kernel.org/netdev/20240213150431.1796171-1-maxime.chevallier@bootlin.com/
Link to V6: https://lore.kernel.org/netdev/20240126183851.2081418-1-maxime.chevallier@bootlin.com/
Link to V5: https://lore.kernel.org/netdev/20231221180047.1924733-1-maxime.chevallier@bootlin.com/
Link to V4: https://lore.kernel.org/netdev/20231215171237.1152563-1-maxime.chevallier@bootlin.com/
Link to V3: https://lore.kernel.org/netdev/20231201163704.1306431-1-maxime.chevallier@bootlin.com/
Link to V2: https://lore.kernel.org/netdev/20231117162323.626979-1-maxime.chevallier@bootlin.com/
Link to V1: https://lore.kernel.org/netdev/20230907092407.647139-1-maxime.chevallier@bootlin.com/

More discussions on specific issues that happened in 6.9-rc:

https://lore.kernel.org/netdev/20240412104615.3779632-1-maxime.chevallier@bootlin.com/
https://lore.kernel.org/netdev/20240429131008.439231-1-maxime.chevallier@bootlin.com/
https://lore.kernel.org/netdev/20240507102822.2023826-1-maxime.chevallier@bootlin.com/

Thanks,

Maxime

Maxime Chevallier (13):
  net: phy: Introduce ethernet link topology representation
  net: sfp: pass the phy_device when disconnecting an sfp module's PHY
  net: phy: add helpers to handle sfp phy connect/disconnect
  net: sfp: Add helper to return the SFP bus name
  net: ethtool: Allow passing a phy index for some commands
  netlink: specs: add phy-index as a header parameter
  net: ethtool: Introduce a command to list PHYs on an interface
  netlink: specs: add ethnl PHY_GET command set
  net: ethtool: plca: Target the command to the requested PHY
  net: ethtool: pse-pd: Target the command to the requested PHY
  net: ethtool: cable-test: Target the command to the requested PHY
  net: ethtool: strset: Allow querying phy stats by index
  Documentation: networking: document phy_link_topology

 Documentation/netlink/specs/ethtool.yaml      |  58 ++++
 Documentation/networking/ethtool-netlink.rst  |  51 +++
 Documentation/networking/index.rst            |   1 +
 .../networking/phy-link-topology.rst          | 121 +++++++
 MAINTAINERS                                   |   1 +
 drivers/net/phy/Makefile                      |   2 +-
 drivers/net/phy/marvell-88x2222.c             |   2 +
 drivers/net/phy/marvell.c                     |   2 +
 drivers/net/phy/marvell10g.c                  |   2 +
 drivers/net/phy/phy_device.c                  |  48 +++
 drivers/net/phy/phy_link_topology.c           | 105 ++++++
 drivers/net/phy/phylink.c                     |   3 +-
 drivers/net/phy/qcom/at803x.c                 |   2 +
 drivers/net/phy/qcom/qca807x.c                |   2 +
 drivers/net/phy/sfp-bus.c                     |  26 +-
 include/linux/netdevice.h                     |   4 +-
 include/linux/phy.h                           |   6 +
 include/linux/phy_link_topology.h             |  82 +++++
 include/linux/sfp.h                           |   8 +-
 include/uapi/linux/ethtool.h                  |  16 +
 include/uapi/linux/ethtool_netlink.h          |  20 ++
 net/core/dev.c                                |  15 +
 net/ethtool/Makefile                          |   3 +-
 net/ethtool/cabletest.c                       |  35 +-
 net/ethtool/netlink.c                         |  66 +++-
 net/ethtool/netlink.h                         |  33 ++
 net/ethtool/phy.c                             | 308 ++++++++++++++++++
 net/ethtool/plca.c                            |  30 +-
 net/ethtool/pse-pd.c                          |  31 +-
 net/ethtool/strset.c                          |  24 +-
 30 files changed, 1056 insertions(+), 51 deletions(-)
 create mode 100644 Documentation/networking/phy-link-topology.rst
 create mode 100644 drivers/net/phy/phy_link_topology.c
 create mode 100644 include/linux/phy_link_topology.h
 create mode 100644 net/ethtool/phy.c

-- 
2.45.2



^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2024-09-10 17:25 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-08-21 15:09 [PATCH net-next v18 00/13] Introduce PHY listing and link_topology tracking Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 01/13] net: phy: Introduce ethernet link topology representation Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 03/13] net: phy: add helpers to handle sfp phy connect/disconnect Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 04/13] net: sfp: Add helper to return the SFP bus name Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 05/13] net: ethtool: Allow passing a phy index for some commands Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 06/13] netlink: specs: add phy-index as a header parameter Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 07/13] net: ethtool: Introduce a command to list PHYs on an interface Maxime Chevallier
2024-09-10 16:41   ` Eric Dumazet
2024-09-10 17:20     ` Maxime Chevallier
2024-09-10 17:23       ` Eric Dumazet
2024-08-21 15:10 ` [PATCH net-next v18 08/13] netlink: specs: add ethnl PHY_GET command set Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 09/13] net: ethtool: plca: Target the command to the requested PHY Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 10/13] net: ethtool: pse-pd: " Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 11/13] net: ethtool: cable-test: " Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 12/13] net: ethtool: strset: Allow querying phy stats by index Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 13/13] Documentation: networking: document phy_link_topology Maxime Chevallier
2024-08-23 12:10 ` [PATCH net-next v18 00/13] Introduce PHY listing and link_topology tracking patchwork-bot+netdevbpf

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).