From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko Stuebner) Date: Tue, 23 May 2017 10:29:52 +0200 Subject: [PATCH v3 1/3] clk: rockchip: add dt-binding header for rk3128 In-Reply-To: <1495501865-18512-2-git-send-email-zhangqing@rock-chips.com> References: <1495501865-18512-1-git-send-email-zhangqing@rock-chips.com> <1495501865-18512-2-git-send-email-zhangqing@rock-chips.com> Message-ID: <1725571.3NA4bbO7jm@phil> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Elaine, Am Dienstag, 23. Mai 2017, 09:11:03 CEST schrieb Elaine Zhang: > Add the dt-bindings header for the rk3128, > that gets shared between the clock controller and > the clock references in the dts. > Add softreset ID for rk3128. > And it also applies to the RK3126 SoC. > > Signed-off-by: Elaine Zhang > --- > include/dt-bindings/clock/rk3128-cru.h | 283 +++++++++++++++++++++++++++++++++ > 1 file changed, 283 insertions(+) > create mode 100644 include/dt-bindings/clock/rk3128-cru.h > > diff --git a/include/dt-bindings/clock/rk3128-cru.h b/include/dt-bindings/clock/rk3128-cru.h > new file mode 100644 > index 000000000000..5f055a41584b > --- /dev/null > +++ b/include/dt-bindings/clock/rk3128-cru.h [...] > +#define SCLK_USB480M 154 > +#define SCLK_USB480M_PHY 155 We probably don't need the clock-id for USB480M_PHY, as it is an external clock and is unused. Instead as I wrote in the previous patch, it should be added to the list of external clocks in the binding txt document. Heiko