Re: [PATCH v2] ASoC: dt-bindings: sound: atmel-at91sam9g20ek: convert to json-schema

["Rob Herring (Arm)" <robh@kernel.org>]

On Wed, 11 Dec 2024 15:16:15 +0530, Balakrishnan Sambath wrote:
> Convert atmel-at91sam9g20ek-wm8731-audio DT binding to yaml
> based json-schema.Change file name to match json-scheme naming.
> 
> Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
> ---
> Changes in v2:
> - Add missing CODEC pin options to 'atmel,audio-routing' items.
> - Drop 'minItems' from 'atmel,audio-routing' since enum defines valid connections.
> - Add subsystem tag to subject.
> - Add blank line between properties and fix typo.
> - Add audio complex description.
> - Link to v1: https://lore.kernel.org/lkml/20240214-at91sam9g20ek-wm8731-yaml-v1-1-33333e17383b@microchip.com
> ---
>  .../bindings/sound/atmel,at91sam9g20ek-wm8731.yaml | 70 ++++++++++++++++++++++
>  .../sound/atmel-at91sam9g20ek-wm8731-audio.txt     | 26 --------
>  2 files changed, 70 insertions(+), 26 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.example.dtb: sound: atmel,audio-routing:2: 'Int MIC' is not one of ['Ext Spk', 'Int Mic', 'LOUT', 'ROUT', 'LHPOUT', 'RHPOUT', 'LLINEIN', 'RLINEIN', 'MICIN']
	from schema $id: http://devicetree.org/schemas/sound/atmel,at91sam9g20ek-wm8731.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241211-sound-atmel-at91sam9g20ek-v2-1-86a0e31e6af9@microchip.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.