[PATCH v4 0/4] Add initial support for QCS8300 SoC and QCS8300 RIDE board

[PATCH v4 0/4] Add initial support for QCS8300 SoC and QCS8300 RIDE board

[Jingyi Wang]

Introduce the Device Tree for the QCS8300 platform.

Features added and enabled:
- CPUs with PSCI idle states
- Interrupt-controller with PDC wakeup support
- Timers, TCSR Clock Controllers
- Reserved Shared memory
- GCC and RPMHCC
- TLMM
- Interconnect
- QuP with uart
- SMMU
- QFPROM
- Rpmhpd power controller
- UFS
- Inter-Processor Communication Controller
- SRAM
- Remoteprocs including ADSP,CDSP and GPDSP
- BWMONs

binding dependencies:
- remoteproc: https://lore.kernel.org/linux-arm-msm/20240925-qcs8300_remoteproc_binding-v3-1-21b0c52b142b@quicinc.com/ - Reviewed
- qfprom: https://lore.kernel.org/all/20240911-qcs8300_qfprom_binding-v2-1-d39226887493@quicinc.com/ - Reviewed
- pdc: https://lore.kernel.org/all/20240911-qcs8300_binding-v2-1-de8641b3eaa1@quicinc.com/ - Reviewed

Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
Changes in v4:
- fixup typo in Makefile(Andrew & Krzysztof)
- add board name in the commit message of the defconfig change(Dmitry)
- separate cpus into 2 clusters in cpu-map(Konrad)
- use QCOM_ICC_TAG_ALWAYS instead of "0" for interconnect nodes(Konrad)
- Remove unused labels and drop redundant comments(Konrad)
- Move clocks to the dtsi file(Dmitry)
- drop reviewed-by tag for dts patch for the code change
- Link to v3: https://lore.kernel.org/r/20241128-qcs8300_initial_dtsi-v3-0-26aa8a164914@quicinc.com

Changes in v3:
- Update title and cleanup signed-off-by tag(Bjorn)
- fix the INTID of EL2 non-secure physical timer(Cong)
- add reviewed-by tag(except for the dtsi patch for the code change)
- code rebase
- Link to v2: https://lore.kernel.org/r/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@quicinc.com

Changes in v2:
- decoupled from the original series
- Drop compatible for QCS8275
- fix property order and add line breaks
- move sleep_clk node to qcs8300-ride.dts
- move l3-cache nodes out of l2-cache nodes and remove cluster1/cluster2
- add BWMON nodes
- commit-msg update
- Link to v1: https://lore.kernel.org/r/20240904-qcs8300_initial_dtsi-v1-0-d0ea9afdc007@quicinc.com

---
Jingyi Wang (4):
      dt-bindings: arm: qcom: document QCS8300 SoC and reference board
      arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300
      arm64: dts: qcom: add QCS8300 platform
      arm64: dts: qcom: add base QCS8300 RIDE board

 Documentation/devicetree/bindings/arm/qcom.yaml |    6 +
 arch/arm64/boot/dts/qcom/Makefile               |    1 +
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts       |  235 ++++
 arch/arm64/boot/dts/qcom/qcs8300.dtsi           | 1405 +++++++++++++++++++++++
 arch/arm64/configs/defconfig                    |    3 +
 5 files changed, 1650 insertions(+)
---
base-commit: f486c8aa16b8172f63bddc70116a0c897a7f3f02
change-id: 20241128-qcs8300_initial_dtsi-ad3f193ce1d7

Best regards,
-- 
Jingyi Wang <quic_jingyw@quicinc.com>

[PATCH v4 1/4] dt-bindings: arm: qcom: document QCS8300 SoC and reference board

[Jingyi Wang]

Document Qualcomm QCS8300 SoC and its reference board QCS8300 RIDE.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ca3990393510..87f1106767a2 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -52,6 +52,7 @@ description: |
         msm8996pro
         msm8998
         qcs404
+        qcs8300
         qcs8550
         qcm2290
         qcm6490
@@ -921,6 +922,11 @@ properties:
           - const: qcom,qcs404-evb
           - const: qcom,qcs404
 
+      - items:
+          - enum:
+              - qcom,qcs8300-ride
+          - const: qcom,qcs8300
+
       - items:
           - enum:
               - qcom,sa8155p-adp

-- 
2.25.1

[PATCH v4 2/4] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300

[Jingyi Wang]

Enable clock controller, interconnect and pinctrl for Qualcomm
QCS8300 platform to boot QCS8300 RIDE board to UART console.

The serial engine depends on gcc, interconnect and pinctrl. Since
the serial console driver is only available as built-in, so these
configs needs be built-in for the UART device to probe and register
the console.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d13218d0c30f..3d9e48940c96 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QCS8300=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
@@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
 CONFIG_QCS_GCC_404=y
+CONFIG_QCS_GCC_8300=y
 CONFIG_SC_CAMCC_7280=m
 CONFIG_QDU_GCC_1000=y
 CONFIG_SC_CAMCC_8280XP=m
@@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCM2290=y
 CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_QCS8300=y
 CONFIG_INTERCONNECT_QCOM_QDU1000=y
 CONFIG_INTERCONNECT_QCOM_SA8775P=y
 CONFIG_INTERCONNECT_QCOM_SC7180=y

-- 
2.25.1

[PATCH v4 3/4] arm64: dts: qcom: add QCS8300 platform

[Jingyi Wang]

Add initial DTSI for QCS8300 SoC.

Features added in this revision:
- CPUs with PSCI idle states
- Interrupt-controller with PDC wakeup support
- Timers, TCSR Clock Controllers
- Reserved Shared memory
- GCC and RPMHCC
- TLMM
- Interconnect
- QuP with uart
- SMMU
- QFPROM
- Rpmhpd power controller
- UFS
- Inter-Processor Communication Controller
- SRAM
- Remoteprocs including ADSP,CDSP and GPDSP
- BWMONs

Written with help from Zhenhua Huang(added the smmu node), Xin Liu(added
ufs, adsp and gpdsp nodes), Tingguo Cheng(added the rpmhpd node), Kyle
Deng(added the aoss_qmp node), Raviteja Laggyshetty(added interconnect
nodes) and Cong Zhang(added the INTID of EL2 non-secure physical timer).

Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300.dtsi | 1405 +++++++++++++++++++++++++++++++++
 1 file changed, 1405 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
new file mode 100644
index 000000000000..73abf2ef9c9f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -0,0 +1,1405 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,qcs8300-gcc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_2>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+
+			l2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_3>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+
+			l2_3: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&l2_4>;
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+
+			l2_4: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_5>;
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+
+			l2_5: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_6>;
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+
+			l2_6: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_7>;
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+
+			l2_7: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l3_0: l3-cache-0 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+
+		l3_1: l3-cache-1 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <449>;
+				exit-latency-us = <801>;
+				min-residency-us = <1574>;
+				local-timer-stop;
+			};
+
+			little_cpu_sleep_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <602>;
+				exit-latency-us = <961>;
+				min-residency-us = <4288>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			silver_cluster_sleep: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2552>;
+				exit-latency-us = <2848>;
+				min-residency-us = <5908>;
+			};
+
+			gold_cluster_sleep: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			system_sleep: domain-sleep {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x42000144>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-qcs8300", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,qcs8300-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,qcs8300-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cluster_pd0: power-domain-cluster0 {
+			#power-domain-cells = <0>;
+			power-domains = <&system_pd>;
+			domain-idle-states = <&gold_cluster_sleep>;
+		};
+
+		cluster_pd1: power-domain-cluster1 {
+			#power-domain-cells = <0>;
+			power-domains = <&system_pd>;
+			domain-idle-states = <&silver_cluster_sleep>;
+		};
+
+		system_pd: power-domain-system {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&system_sleep>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_image_mem: aop-image-region@90800000 {
+			reg = <0x0 0x90800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@90860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x90860000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: smem@90900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x90900000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		lpass_machine_learning_mem: lpass-machine-learning-region@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0xf00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap-region@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x800000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@95200000 {
+			reg = <0x0 0x95200000 0x0 0x500000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@95c00000 {
+			no-map;
+			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb-region@97a00000 {
+			reg = <0x0 0x97a00000 0x0 0x80000>;
+			no-map;
+		};
+
+		q6_gpdsp_dtb_mem: q6-gpdsp-dtb-region@97a80000 {
+			reg = <0x0 0x97a80000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpdsp_mem: gpdsp-region@97b00000 {
+			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@99900000 {
+			reg = <0x0 0x99900000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@99980000 {
+			reg = <0x0 0x99980000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode-region@9b780000 {
+			reg = <0x0 0x9b780000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@9b782000 {
+			reg = <0x0 0x9b782000 0x0 0x700000>;
+			no-map;
+		};
+
+		video_mem: video-region@9be82000 {
+			reg = <0x0 0x9be82000 0x0 0x700000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	smp2p-gpdsp {
+		compatible = "qcom,smp2p";
+		interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <617>, <616>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <17>;
+
+		smp2p_gpdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_gpdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x10 0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,qcs8300-gcc";
+			reg = <0x0 0x00100000 0x0 0xc7018>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,qcs8300-ipcc", "qcom,ipcc";
+			reg = <0x0 0x408000 0x0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,qcs8300-qfprom", "qcom,qfprom";
+			reg = <0x0 0x00784000 0x0 0x1200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart7_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@14c0000 {
+			compatible = "qcom,qcs8300-config-noc";
+			reg = <0x0 0x014c0000 0x0 0x13080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,qcs8300-system-noc";
+			reg = <0x0 0x01680000 0x0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16c0000 {
+			compatible = "qcom,qcs8300-aggre1-noc";
+			reg = <0x0 0x016c0000 0x0 0x17080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,qcs8300-aggre2-noc";
+			reg = <0x0 0x01700000 0x0 0x1a080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@1760000 {
+			compatible = "qcom,qcs8300-pcie-anoc";
+			reg = <0x0 0x01760000 0x0 0xc080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gpdsp_anoc: interconnect@1780000 {
+			compatible = "qcom,qcs8300-gpdsp-anoc";
+			reg = <0x0 0x01780000 0x0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@17a0000 {
+			compatible = "qcom,qcs8300-mmss-noc";
+			reg = <0x0 0x017a0000 0x0 0x40000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x100 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,qcs8300-qmp-ufs-phy", "qcom,sa8775p-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe10>;
+			/*
+			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
+			 * enables the CXO clock to eDP *and* UFS PHY.
+			 */
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_EDP_REF_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,qcs8300-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,qcs8300-adsp-pas", "qcom,sa8775p-adsp-pas";
+			reg = <0x0 0x3000000 0x0 0x00100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,qcs8300-lpass-ag-noc";
+			reg = <0x0 0x03c40000 0x0 0x17200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,qcs8300-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x9091000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2601000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <7984000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <12195000>;
+				};
+			};
+		};
+
+		pmu@90b5400 {
+			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b5400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b6400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
+		dc_noc: interconnect@90e0000 {
+			compatible = "qcom,qcs8300-dc-noc";
+			reg = <0x0 0x090e0000 0x0 0x5080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			compatible = "qcom,qcs8300-gem-noc";
+			reg = <0x0 0x9100000 0x0 0xf7080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,qcs8300-pdc", "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 2>,
+					  <70 520 1>,
+					  <73 523 1>,
+					  <118 568 6>,
+					  <124 609 3>,
+					  <159 638 1>,
+					  <160 720 3>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 2>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 2>,
+					  <228 440 1>,
+					  <229 663 1>,
+					  <230 524 2>,
+					  <232 612 3>,
+					  <235 723 5>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,qcs8300-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					       IPCC_MPROC_SIGNAL_GLINK_QMP
+					       IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+			#clock-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,qcs8300-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 133>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_default: qup-uart7-state {
+				/* TX, RX */
+				pins = "gpio43", "gpio44";
+				function = "qup0_se7";
+			};
+		};
+
+		sram: sram@146d8000 {
+			compatible = "qcom,qcs8300-imem", "syscon", "simple-mfd";
+			reg = <0x0 0x146d8000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x146d8000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI  98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI  99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a60000 0x0 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&system_pd>;
+			label = "apps_rsc";
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 2>,
+					  <SLEEP_TCS 3>,
+					  <WAKE_TCS 3>,
+					  <CONTROL_TCS 0>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sa8775p-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board_clk>;
+				clock-names = "xo";
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qcs8300-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp-2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp-3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		remoteproc_gpdsp: remoteproc@20c00000 {
+			compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas";
+			reg = <0x0 0x20c00000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_gpdsp_in 0 0>,
+					      <&smp2p_gpdsp_in 1 0>,
+					      <&smp2p_gpdsp_in 2 0>,
+					      <&smp2p_gpdsp_in 3 0>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx",
+					     "mxc";
+
+			interconnects = <&gpdsp_anoc MASTER_DSP0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_CLK_CTL QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&gpdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_gpdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "gpdsp";
+				qcom,remote-pid = <17>;
+			};
+		};
+
+		nspa_noc: interconnect@260c0000 {
+			compatible = "qcom,qcs8300-nspa-noc";
+			reg = <0x0 0x260c0000 0x0 0x16080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		remoteproc_cdsp: remoteproc@26300000 {
+			compatible = "qcom,qcs8300-cdsp-pas", "qcom,sa8775p-cdsp0-pas";
+			reg = <0x0 0x26300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP0>;
+
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			interconnects = <&nspa_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};

-- 
2.25.1

[PATCH v4 4/4] arm64: dts: qcom: add base QCS8300 RIDE board

[Jingyi Wang]

Add initial support for Qualcomm QCS8300 RIDE board which enables DSPs,
UFS and booting to shell with uart console.

Written with help from Tingguo Cheng (added rpmhpd nodes) and Xin Liu
(added ufs, adsp and gpdsp nodes).

Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile         |   1 +
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 235 ++++++++++++++++++++++++++++++
 2 files changed, 236 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9bb8b191aeb5..1df3dcc1ee5d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
new file mode 100644
index 000000000000..85b84778e85a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "qcs8300.dtsi"
+/ {
+	model = "Qualcomm Technologies, Inc. QCS8300 Ride";
+	compatible = "qcom,qcs8300-ride", "qcom,qcs8300";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s5c: smps5 {
+			regulator-name = "vreg_s5c";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs8300/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs8300/cdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_gpdsp {
+	firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l5a>;
+	status = "okay";
+};

-- 
2.25.1

Re: (subset) [PATCH v4 0/4] Add initial support for QCS8300 SoC and QCS8300 RIDE board

[Bjorn Andersson]

On Tue, 03 Dec 2024 17:27:11 +0800, Jingyi Wang wrote:
> Introduce the Device Tree for the QCS8300 platform.
> 
> Features added and enabled:
> - CPUs with PSCI idle states
> - Interrupt-controller with PDC wakeup support
> - Timers, TCSR Clock Controllers
> - Reserved Shared memory
> - GCC and RPMHCC
> - TLMM
> - Interconnect
> - QuP with uart
> - SMMU
> - QFPROM
> - Rpmhpd power controller
> - UFS
> - Inter-Processor Communication Controller
> - SRAM
> - Remoteprocs including ADSP,CDSP and GPDSP
> - BWMONs
> 
> [...]

Applied, thanks!

[1/4] dt-bindings: arm: qcom: document QCS8300 SoC and reference board
      commit: d511280ce9cc5920442e78a589946f63c247dd3b
[3/4] arm64: dts: qcom: add QCS8300 platform
      commit: 7be190e4bdd2bd1aca84afef06bb755c06a85473
[4/4] arm64: dts: qcom: add base QCS8300 RIDE board
      commit: 45d55e2da9bd10d24c4730b452b11a76dc3960b8

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: (subset) [PATCH v4 0/4] Add initial support for QCS8300 SoC and QCS8300 RIDE board

[Bjorn Andersson]

On Tue, 03 Dec 2024 17:27:11 +0800, Jingyi Wang wrote:
> Introduce the Device Tree for the QCS8300 platform.
> 
> Features added and enabled:
> - CPUs with PSCI idle states
> - Interrupt-controller with PDC wakeup support
> - Timers, TCSR Clock Controllers
> - Reserved Shared memory
> - GCC and RPMHCC
> - TLMM
> - Interconnect
> - QuP with uart
> - SMMU
> - QFPROM
> - Rpmhpd power controller
> - UFS
> - Inter-Processor Communication Controller
> - SRAM
> - Remoteprocs including ADSP,CDSP and GPDSP
> - BWMONs
> 
> [...]

Applied, thanks!

[2/4] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300
      commit: 57039a27658a1e7ca1c60fe7e381092c609e4bc7

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>