From: "Rob Herring (Arm)" <robh@kernel.org>
To: Yannic Moog <y.moog@phytec.de>
Cc: Teresa Remmet <t.remmet@phytec.de>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Yashwanth Varakala <y.varakala@phytec.de>,
linux-kernel@vger.kernel.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Benjamin Hahn <b.hahn@phytec.de>,
upstream@lists.phytec.de, Jan Remmet <j.remmet@phytec.de>,
imx@lists.linux.dev, Sascha Hauer <s.hauer@pengutronix.de>,
devicetree@vger.kernel.org,
Catalin Marinas <catalin.marinas@arm.com>,
linux-arm-kernel@lists.infradead.org,
Will Deacon <will@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>
Subject: Re: [PATCH 0/2] Add new imx imx95-libra-rdk-fpsc SBC
Date: Fri, 09 May 2025 07:39:21 -0500 [thread overview]
Message-ID: <174679427817.2814201.3015231739636256872.robh@kernel.org> (raw)
In-Reply-To: <20250507-wip-y-moog-phytec-de-imx95-libra-v1-0-4b73843ad4cd@phytec.de>
On Wed, 07 May 2025 15:13:11 +0200, Yannic Moog wrote:
> The Libra i.MX 95 is a SBC that consists of the Libra base board
> and the phyCORE i.MX 95 FPSC SoM.
> This series adds its binding and device trees.
>
> ---
> Yannic Moog (2):
> dt-bindings: add imx95-libra-rdk-fpsc
> arm64: dts: add imx95-libra-rdk-fpsc board
>
> Documentation/devicetree/bindings/arm/fsl.yaml | 7 +
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/imx95-libra-rdk-fpsc.dts | 327 ++++++++++
> .../boot/dts/freescale/imx95-phycore-fpsc.dtsi | 656 +++++++++++++++++++++
> 4 files changed, 991 insertions(+)
> ---
> base-commit: 9bfe32fed9a8c17000f7cd6bc59ce8348aefe5e9
> change-id: 20250415-wip-y-moog-phytec-de-imx95-libra-27c9ce555b91
>
> Best regards,
> --
> Yannic Moog <y.moog@phytec.de>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: using specified base-commit 9bfe32fed9a8c17000f7cd6bc59ce8348aefe5e9
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/freescale/' for 20250507-wip-y-moog-phytec-de-imx95-libra-v1-0-4b73843ad4cd@phytec.de:
arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dtb: usb@4c200000 (fsl,imx95-usb): compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx95-usb', 'fsl,imx7d-usb', 'fsl,imx27-usb'] is too long
'fsl,imx95-usb' is not one of ['fsl,imx27-usb']
'fsl,imx95-usb' is not one of ['fsl,imx23-usb', 'fsl,imx25-usb', 'fsl,imx28-usb', 'fsl,imx35-usb', 'fsl,imx50-usb', 'fsl,imx51-usb', 'fsl,imx53-usb', 'fsl,imx6q-usb', 'fsl,imx6sl-usb', 'fsl,imx6sx-usb', 'fsl,imx6ul-usb', 'fsl,imx7d-usb', 'fsl,vf610-usb']
'fsl,imx95-usb' is not one of ['fsl,imx8dxl-usb', 'fsl,imx8ulp-usb']
'fsl,imx95-usb' is not one of ['fsl,imx8mm-usb', 'fsl,imx8mn-usb', 'fsl,imx93-usb']
'fsl,imx95-usb' is not one of ['fsl,imx6sll-usb', 'fsl,imx7ulp-usb']
'fsl,imx27-usb' was expected
'fsl,imx7ulp-usb' was expected
'fsl,imx6ul-usb' was expected
from schema $id: http://devicetree.org/schemas/usb/chipidea,usb2-imx.yaml#
arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dtb: usb@4c200000 (fsl,imx95-usb): interrupts: [[0, 176, 4], [0, 174, 4]] is too long
from schema $id: http://devicetree.org/schemas/usb/chipidea,usb2-imx.yaml#
arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dtb: /soc/usb@4c200000: failed to match any schema with compatible: ['fsl,imx95-usb', 'fsl,imx7d-usb', 'fsl,imx27-usb']
arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dtb: usbmisc@4c200200 (fsl,imx95-usbmisc): compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx95-usbmisc', 'fsl,imx7d-usbmisc', 'fsl,imx6q-usbmisc'] is too long
'fsl,imx95-usbmisc' is not one of ['fsl,imx25-usbmisc', 'fsl,imx27-usbmisc', 'fsl,imx35-usbmisc', 'fsl,imx51-usbmisc', 'fsl,imx53-usbmisc', 'fsl,imx6q-usbmisc', 'fsl,vf610-usbmisc']
'fsl,imx95-usbmisc' is not one of ['fsl,imx6ul-usbmisc', 'fsl,imx6sl-usbmisc', 'fsl,imx6sx-usbmisc', 'fsl,imx7d-usbmisc']
'fsl,imx95-usbmisc' is not one of ['fsl,imx7ulp-usbmisc', 'fsl,imx8mm-usbmisc', 'fsl,imx8mn-usbmisc', 'fsl,imx8ulp-usbmisc']
'fsl,imx6sll-usbmisc' was expected
'fsl,imx6q-usbmisc' was expected
'fsl,imx6ul-usbmisc' was expected
from schema $id: http://devicetree.org/schemas/usb/fsl,usbmisc.yaml#
arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dtb: usbmisc@4c200200 (fsl,imx95-usbmisc): reg: [[0, 1277166080, 0, 512], [0, 1275133972, 0, 4]] is too long
from schema $id: http://devicetree.org/schemas/usb/fsl,usbmisc.yaml#
arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dtb: /soc/usbmisc@4c200200: failed to match any schema with compatible: ['fsl,imx95-usbmisc', 'fsl,imx7d-usbmisc', 'fsl,imx6q-usbmisc']
prev parent reply other threads:[~2025-05-09 13:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-07 13:13 [PATCH 0/2] Add new imx imx95-libra-rdk-fpsc SBC Yannic Moog
2025-05-07 13:13 ` [PATCH 1/2] dt-bindings: add imx95-libra-rdk-fpsc Yannic Moog
2025-05-07 14:17 ` Rob Herring (Arm)
2025-05-08 14:57 ` Conor Dooley
2025-05-08 14:59 ` Krzysztof Kozlowski
2025-05-08 15:03 ` Conor Dooley
2025-05-07 13:13 ` [PATCH 2/2] arm64: dts: add imx95-libra-rdk-fpsc board Yannic Moog
2025-05-09 12:39 ` Rob Herring (Arm) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=174679427817.2814201.3015231739636256872.robh@kernel.org \
--to=robh@kernel.org \
--cc=b.hahn@phytec.de \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=j.remmet@phytec.de \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=t.remmet@phytec.de \
--cc=upstream@lists.phytec.de \
--cc=will@kernel.org \
--cc=y.moog@phytec.de \
--cc=y.varakala@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox