* [PATCH v10 0/2] Add Meta (Facebook) Ventura BMC (AST2600)
@ 2025-08-01 14:11 P.K. Lee
2025-08-01 14:11 ` [PATCH v10 1/2] dt-bindings: arm:aspeed add Meta Ventura board P.K. Lee
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: P.K. Lee @ 2025-08-01 14:11 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, joel, andrew, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, patrick
Cc: Jerry.Lin, Jason-Hsu, yang.chen, p.k.lee
Add Linux device tree entry related to Meta (Facebook) Ventura specific
devices connected to the BMC (AST2600) SoC. The purpose of Ventura is to
detect liquid leakage from all compute trays, switch trays and rack
sensors within the rack, log the events, and take necessary actions
accordingly.
---
v1:
1. Create ventura dts file.
2. Add commit msg.
3. Use format-patch to generate patch.
4. Add subject prefixes matching the subsystem.
---
v2:
1. Modify email content.
---
v3:
1. Add mail list.
---
v4:
1. Apply git send-email --thread option.
2. Sort nodes in the dts alphanumerically.
---
v5:
1. Run scripts/checkpatch.pl and fix reported warnings.
2. Remove unnecessary 88E6393X CONFIG FRU.
---
v6:
1. Add a new stage for the DTS change.
2. Run scripts/checkpatch.pl and fix reported error.
3. Fix the issue in a separate patch.
---
v7:
1. Fix broken indentation in the device tree file.
2. Sort nodes alphabetically, then by address if equal.
3. Rename fan sensor nodes from 'hwmon' to 'fan-controller'.
---
v8:
1. This patch series has significant changes compared to
previous versions, and quite some time has passed since the last
submission.Therefore, previously received Acked-by/Reviewed-by/Tested-by
tags are not included in this version.
If needed, tags can be added again after review of thisnew version.
---
v9:
1. Reordered the node sequence under i2c5.
2. Added a description of the platform's intended use to the commit
messages.
3. Added 3 GPIO expanders to i2c10 and defined the necessary GPIO
line names.
---
v10:
1. Added IRQ support in GPIO expanders under i2c10 to handle edge-triggered
events.
2. Reordered the nodes.
---
P.K. Lee (2):
dt-bindings: arm:aspeed add Meta Ventura board
ARM: dts: aspeed: ventura: add Meta Ventura BMC
.../bindings/arm/aspeed/aspeed.yaml | 1 +
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-facebook-ventura.dts | 1578 +++++++++++++++++
3 files changed, 1580 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v10 1/2] dt-bindings: arm:aspeed add Meta Ventura board
2025-08-01 14:11 [PATCH v10 0/2] Add Meta (Facebook) Ventura BMC (AST2600) P.K. Lee
@ 2025-08-01 14:11 ` P.K. Lee
2025-08-01 14:17 ` Krzysztof Kozlowski
2025-08-01 14:11 ` [PATCH v10 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC P.K. Lee
2025-08-04 3:09 ` [PATCH v10 0/2] Add Meta (Facebook) Ventura BMC (AST2600) Rob Herring (Arm)
2 siblings, 1 reply; 5+ messages in thread
From: P.K. Lee @ 2025-08-01 14:11 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, joel, andrew, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, patrick
Cc: Jerry.Lin, Jason-Hsu, yang.chen, p.k.lee
From: "P.K. Lee" <p.k.lee@quantatw.com>
Document the new compatibles used on Meta Ventura.
Signed-off-by: P.K. Lee <p.k.lee@quantatw.com>
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index b3c9d3310d57..8cab682b7bca 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -90,6 +90,7 @@ properties:
- facebook,greatlakes-bmc
- facebook,harma-bmc
- facebook,minerva-cmc
+ - facebook,ventura-rmc
- facebook,santabarbara-bmc
- facebook,yosemite4-bmc
- ibm,blueridge-bmc
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v10 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC
2025-08-01 14:11 [PATCH v10 0/2] Add Meta (Facebook) Ventura BMC (AST2600) P.K. Lee
2025-08-01 14:11 ` [PATCH v10 1/2] dt-bindings: arm:aspeed add Meta Ventura board P.K. Lee
@ 2025-08-01 14:11 ` P.K. Lee
2025-08-04 3:09 ` [PATCH v10 0/2] Add Meta (Facebook) Ventura BMC (AST2600) Rob Herring (Arm)
2 siblings, 0 replies; 5+ messages in thread
From: P.K. Lee @ 2025-08-01 14:11 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, joel, andrew, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, patrick
Cc: Jerry.Lin, Jason-Hsu, yang.chen, p.k.lee
From: "P.K. Lee" <p.k.lee@quantatw.com>
Add Linux device tree related to Meta (Facebook) Ventura specific
devices connected to the BMC (AST2600) SoC. The purpose of Ventura is to
detect liquid leakage from all compute trays, switch trays and rack
sensors within the rack, log the events, and take necessary actions
accordingly.
Signed-off-by: P.K. Lee <p.k.lee@quantatw.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-facebook-ventura.dts | 1578 +++++++++++++++++
2 files changed, 1579 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 8062c685f7e8..c58087063482 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-santabarbara.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
+ aspeed-bmc-facebook-ventura.dtb \
aspeed-bmc-facebook-wedge40.dtb \
aspeed-bmc-facebook-wedge100.dtb \
aspeed-bmc-facebook-wedge400-data64.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
new file mode 100644
index 000000000000..3d16c80a40c7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
@@ -0,0 +1,1578 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Facebook ventura RMC";
+ compatible = "facebook,ventura-rmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ i2c16 = &i2c3mux0ch3;
+ i2c17 = &i2c3mux0ch4;
+ i2c18 = &i2c3mux0ch5;
+ i2c19 = &i2c3mux0ch6;
+ i2c20 = &i2c3mux0ch0;
+ i2c21 = &i2c3mux0ch1;
+ i2c22 = &i2c3mux0ch2;
+ i2c23 = &i2c3mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux0ch4;
+ i2c29 = &i2c0mux0ch5;
+ i2c30 = &i2c0mux0ch6;
+ i2c31 = &i2c0mux0ch7;
+ i2c32 = &i2c1mux0ch0;
+ i2c33 = &i2c1mux0ch1;
+ i2c34 = &i2c1mux0ch2;
+ i2c35 = &i2c1mux0ch3;
+ i2c36 = &i2c1mux0ch4;
+ i2c37 = &i2c1mux0ch5;
+ i2c38 = &i2c1mux0ch6;
+ i2c39 = &i2c1mux0ch7;
+ i2c40 = &i2c2mux0ch0;
+ i2c41 = &i2c2mux0ch1;
+ i2c42 = &i2c2mux0ch2;
+ i2c43 = &i2c2mux0ch3;
+ i2c44 = &i2c2mux0ch4;
+ i2c45 = &i2c2mux0ch5;
+ i2c46 = &i2c2mux0ch6;
+ i2c47 = &i2c2mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ default-state = "on";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "power_blue";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-4 {
+ label = "compute1_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g5_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ label = "compute1_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ label = "compute1_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ label = "compute2_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-8 {
+ label = "compute2_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ label = "compute2_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-10 {
+ label = "compute3_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-11 {
+ label = "compute3_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-12 {
+ label = "compute3_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-13 {
+ label = "compute4_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-14 {
+ label = "compute4_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-15 {
+ label = "compute4_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-16 {
+ label = "compute5_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-17 {
+ label = "compute5_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-18 {
+ label = "compute5_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-19 {
+ label = "compute6_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-20 {
+ label = "compute6_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-21 {
+ label = "compute6_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-22 {
+ label = "compute7_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-23 {
+ label = "compute7_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-24 {
+ label = "compute7_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-25 {
+ label = "compute8_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-26 {
+ label = "compute8_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-27 {
+ label = "compute8_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-28 {
+ label = "nvs1_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-29 {
+ label = "nvs1_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-30 {
+ label = "nvs1_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-31 {
+ label = "nvs2_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-32 {
+ label = "nvs2_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-33 {
+ label = "nvs2_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-34 {
+ label = "nvs3_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-35 {
+ label = "nvs3_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-36 {
+ label = "nvs3_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-37 {
+ label = "nvs4_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-38 {
+ label = "nvs4_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-39 {
+ label = "nvs4_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-40 {
+ label = "nvs5_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-41 {
+ label = "nvs5_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-42 {
+ label = "nvs5_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-43 {
+ label = "nvs6_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-44 {
+ label = "nvs6_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-45 {
+ label = "nvs6_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-46 {
+ label = "nvs7_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-47 {
+ label = "nvs7_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-48 {
+ label = "nvs7_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-49 {
+ label = "nvs8_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-50 {
+ label = "nvs8_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-51 {
+ label = "nvs8_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-52 {
+ label = "nvs9_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-53 {
+ label = "nvs9_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-54 {
+ label = "nvs9_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-55 {
+ label = "compute9_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-56 {
+ label = "compute9_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-57 {
+ label = "compute9_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-58 {
+ label = "compute10_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-59 {
+ label = "compute10_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-60 {
+ label = "compute10_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-61 {
+ label = "compute11_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-62 {
+ label = "compute11_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-63 {
+ label = "compute11_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-64 {
+ label = "compute12_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-65 {
+ label = "compute12_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-66 {
+ label = "compute12_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-67 {
+ label = "compute13_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-68 {
+ label = "compute13_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-69 {
+ label = "compute13_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-70 {
+ label = "compute14_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-71 {
+ label = "compute14_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-72 {
+ label = "compute14_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-73 {
+ label = "compute15_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-74 {
+ label = "compute15_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-75 {
+ label = "compute15_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-76 {
+ label = "compute16_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-77 {
+ label = "compute16_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-78 {
+ label = "compute16_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-79 {
+ label = "compute17_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-80 {
+ label = "compute17_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-81 {
+ label = "compute17_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-82 {
+ label = "compute18_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-83 {
+ label = "compute18_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-84 {
+ label = "compute18_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-85 {
+ label = "fan0_ledd1_blue";
+ default-state = "off";
+ gpios = <&fan_leds_g1_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-86 {
+ label = "fan0_ledd2_blue";
+ default-state = "off";
+ gpios = <&fan_leds_g1_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-87 {
+ label = "fan0_ledd1_amber";
+ default-state = "off";
+ gpios = <&fan_leds_g1_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-88 {
+ label = "fan0_ledd2_amber";
+ default-state = "off";
+ gpios = <&fan_leds_g1_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-89 {
+ label = "fan1_ledd1_blue";
+ default-state = "off";
+ gpios = <&fan_leds_g2_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-90 {
+ label = "fan1_ledd2_blue";
+ default-state = "off";
+ gpios = <&fan_leds_g2_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-91 {
+ label = "fan1_ledd1_amber";
+ default-state = "off";
+ gpios = <&fan_leds_g2_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-92 {
+ label = "fan1_ledd2_amber";
+ default-state = "off";
+ gpios = <&fan_leds_g2_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p2v5_bmc_aux";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&adc0 {
+ vref-supply = <&p1v8_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref-supply = <&p2v5_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","","","BMC_READY","","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","FM_MDIO_SW_SEL","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+ status = "okay";
+ ngpios = <128>;
+ bus-frequency = <2000000>;
+
+ gpio-line-names =
+ /*"input pin","output pin"*/
+ /*A0 - A7*/
+ "power-chassis-good","power-chassis-control",
+ "host0-ready","WATER_VALVE_CLOSED_N",
+ "wPRSNT_RETURN_PLD_R_N","FM_MDIO_SW_SEL_PLD",
+ "wPRSNT_SUPPLY_PLD_R_N","FM_88E6393X_BIN_UPDATE_EN_N",
+ "LEAK3_DETECT","",
+ "LEAK4_DETECT","",
+ "RETURN_CNTL_FB_D_R","",
+ "SUPPLY_CNTL_FB_D_R","",
+ /*B0 - B7*/
+ "IOEXP0_INT_N","",
+ "IOEXP11_INT_N","",
+ "IOEXP10_INT_N","",
+ "IOEXP9_INT_N","",
+ "RPU_2_READY_SPARE_PLD_R","",
+ "RPU_2_READY_PLD_R","",
+ "RPU_READY_SPARE_PLD_R","",
+ "RPU_READY_PLD_R","",
+ /*C0 - C7*/
+ "wAALC_RPU_READY","",
+ "LEAK0_DETECT","",
+ "LEAK1_DETECT","",
+ "LEAK2_DETECT","",
+ "PRSNT_COMPUTE_TRAY1_N","",
+ "PRSNT_COMPUTE_TRAY2_N","",
+ "PRSNT_COMPUTE_TRAY3_N","",
+ "PRSNT_COMPUTE_TRAY4_N","",
+ /*D0 - D7*/
+ "PRSNT_COMPUTE_TRAY5_N","",
+ "PRSNT_COMPUTE_TRAY6_N","",
+ "PRSNT_COMPUTE_TRAY7_N","",
+ "PRSNT_COMPUTE_TRAY8_N","",
+ "PRSNT_NVS_TRAY1_N","",
+ "PRSNT_NVS_TRAY2_N","",
+ "PRSNT_COMPUTE_TRAY11_N","",
+ "PRSNT_COMPUTE_TRAY12_N","",
+ /*E0 - E7*/
+ "PRSNT_COMPUTE_TRAY13_N","",
+ "PRSNT_COMPUTE_TRAY14_N","",
+ "PRSNT_COMPUTE_TRAY15_N","",
+ "PRSNT_COMPUTE_TRAY16_N","",
+ "PRSNT_COMPUTE_TRAY17_N","",
+ "PRSNT_COMPUTE_TRAY18_N","",
+ "PRSNT_NVS_TRAY3_N","",
+ "PRSNT_NVS_TRAY4_N","",
+ /*F0 - F7*/
+ "PRSNT_NVS_TRAY5_N","",
+ "PRSNT_NVS_TRAY6_N","",
+ "PRSNT_NVS_TRAY7_N","",
+ "PRSNT_NVS_TRAY8_N","",
+ "PRSNT_NVS_TRAY9_N","",
+ "PRSNT_COMPUTE_TRAY9_N","",
+ "PRSNT_COMPUTE_TRAY10_N","",
+ "SMALL_LEAK_COMPUTE_TRAY1_N","",
+ /*G0 - G7*/
+ "SMALL_LEAK_COMPUTE_TRAY2_N","",
+ "SMALL_LEAK_COMPUTE_TRAY3_N","",
+ "SMALL_LEAK_COMPUTE_TRAY4_N","",
+ "SMALL_LEAK_COMPUTE_TRAY5_N","",
+ "SMALL_LEAK_COMPUTE_TRAY6_N","",
+ "SMALL_LEAK_COMPUTE_TRAY7_N","",
+ "SMALL_LEAK_COMPUTE_TRAY8_N","",
+ "SMALL_LEAK_NVS_TRAY1_N","",
+ /*H0 - H7*/
+ "SMALL_LEAK_NVS_TRAY2_N","",
+ "SMALL_LEAK_COMPUTE_TRAY11_N","",
+ "SMALL_LEAK_COMPUTE_TRAY12_N","",
+ "SMALL_LEAK_COMPUTE_TRAY13_N","",
+ "SMALL_LEAK_COMPUTE_TRAY14_N","",
+ "SMALL_LEAK_COMPUTE_TRAY15_N","",
+ "SMALL_LEAK_COMPUTE_TRAY16_N","",
+ "SMALL_LEAK_COMPUTE_TRAY17_N","",
+ /*I0 - I7*/
+ "SMALL_LEAK_COMPUTE_TRAY18_N","",
+ "SMALL_LEAK_NVS_TRAY3_N","",
+ "SMALL_LEAK_NVS_TRAY4_N","",
+ "SMALL_LEAK_NVS_TRAY5_N","",
+ "SMALL_LEAK_NVS_TRAY6_N","",
+ "SMALL_LEAK_NVS_TRAY7_N","",
+ "SMALL_LEAK_NVS_TRAY8_N","",
+ "SMALL_LEAK_NVS_TRAY9_N","",
+ /*J0 - J7*/
+ "SMALL_LEAK_COMPUTE_TRAY9_N","",
+ "SMALL_LEAK_COMPUTE_TRAY10_N","",
+ "PWRGD_COMPUTE_TRAY1_N","",
+ "PWRGD_COMPUTE_TRAY2_N","",
+ "PWRGD_COMPUTE_TRAY3_N","",
+ "PWRGD_COMPUTE_TRAY4_N","",
+ "PWRGD_COMPUTE_TRAY5_N","",
+ "PWRGD_COMPUTE_TRAY6_N","",
+ /*K0 - K7*/
+ "PWRGD_COMPUTE_TRAY7_N","",
+ "PWRGD_COMPUTE_TRAY8_N","",
+ "PWRGD_NVS_TRAY1_PWROK_N","",
+ "PWRGD_NVS_TRAY2_PWROK_N","",
+ "PWRGD_COMPUTE_TRAY11_N","",
+ "PWRGD_COMPUTE_TRAY12_N","",
+ "PWRGD_COMPUTE_TRAY13_N","",
+ "PWRGD_COMPUTE_TRAY14_N","",
+ /*L0 - L7*/
+ "PWRGD_COMPUTE_TRAY15_N","",
+ "PWRGD_COMPUTE_TRAY16_N","",
+ "PWRGD_COMPUTE_TRAY17_N","",
+ "PWRGD_COMPUTE_TRAY18_N","",
+ "PWRGD_NVS_TRAY3_PWROK_N","",
+ "PWRGD_NVS_TRAY4_PWROK_N","",
+ "PWRGD_NVS_TRAY5_PWROK_N","",
+ "PWRGD_NVS_TRAY6_PWROK_N","",
+ /*M0 - M7*/
+ "PWRGD_NVS_TRAY7_PWROK_N","",
+ "PWRGD_NVS_TRAY8_PWROK_N","",
+ "PWRGD_NVS_TRAY9_PWROK_N","",
+ "PWRGD_COMPUTE_TRAY9_N","",
+ "PWRGD_COMPUTE_TRAY10_N","",
+ "LEAK_DETECT_COMPUTE_TRAY1_N","",
+ "LEAK_DETECT_COMPUTE_TRAY2_N","",
+ "LEAK_DETECT_COMPUTE_TRAY3_N","",
+ /*N0 - N7*/
+ "LEAK_DETECT_COMPUTE_TRAY4_N","",
+ "LEAK_DETECT_COMPUTE_TRAY5_N","",
+ "LEAK_DETECT_COMPUTE_TRAY6_N","",
+ "LEAK_DETECT_COMPUTE_TRAY7_N","",
+ "LEAK_DETECT_COMPUTE_TRAY8_N","",
+ "LEAK_DETECT_NVS_TRAY1_N","",
+ "LEAK_DETECT_NVS_TRAY2_N","",
+ "LEAK_DETECT_COMPUTE_TRAY11_N","",
+ /*O0 - O7*/
+ "LEAK_DETECT_COMPUTE_TRAY12_N","",
+ "LEAK_DETECT_COMPUTE_TRAY13_N","",
+ "LEAK_DETECT_COMPUTE_TRAY14_N","",
+ "LEAK_DETECT_COMPUTE_TRAY15_N","",
+ "LEAK_DETECT_COMPUTE_TRAY16_N","",
+ "LEAK_DETECT_COMPUTE_TRAY17_N","",
+ "LEAK_DETECT_COMPUTE_TRAY18_N","",
+ "LEAK_DETECT_NVS_TRAY3_N","",
+ /*P0 - P7*/
+ "LEAK_DETECT_NVS_TRAY4_N","",
+ "LEAK_DETECT_NVS_TRAY5_N","",
+ "LEAK_DETECT_NVS_TRAY6_N","",
+ "LEAK_DETECT_NVS_TRAY7_N","",
+ "LEAK_DETECT_NVS_TRAY8_N","",
+ "LEAK_DETECT_NVS_TRAY9_N","",
+ "LEAK_DETECT_COMPUTE_TRAY9_N","",
+ "LEAK_DETECT_COMPUTE_TRAY10_N","";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "okay";
+ };
+
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "okay";
+ };
+
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ status = "okay";
+ };
+
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ status = "okay";
+ };
+
+ i2c0mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ status = "okay";
+ };
+
+ i2c0mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ status = "okay";
+ };
+
+ i2c0mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ status = "okay";
+ };
+
+ i2c0mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ status = "okay";
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "okay";
+ };
+
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "okay";
+ };
+
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ status = "okay";
+ };
+
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ status = "okay";
+ };
+
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ status = "okay";
+ };
+
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ status = "okay";
+ };
+
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ status = "okay";
+ };
+
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ status = "okay";
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c2mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "okay";
+ };
+
+ i2c2mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "okay";
+ };
+
+ i2c2mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ status = "okay";
+ };
+
+ i2c2mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ status = "okay";
+ };
+
+ i2c2mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ status = "okay";
+ };
+
+ i2c2mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ status = "okay";
+ };
+
+ i2c2mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ status = "okay";
+ };
+
+ i2c2mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ status = "okay";
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c3mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "okay";
+ };
+
+ i2c3mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "okay";
+ };
+
+ i2c3mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ status = "okay";
+ };
+
+ i2c3mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adc@1f {
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ fan_leds_g1_gpio: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "FAN0_PRSNT", "FAN1_PRSNT",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ adc@35 {
+ compatible = "maxim,max11617";
+ reg = <0x35>;
+ };
+
+ // Fan Board 0 FRU
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+ };
+
+ i2c3mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ adc@1f {
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ fan_leds_g2_gpio: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "FAN2_PRSNT", "FAN3_PRSNT",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ adc@35 {
+ compatible = "maxim,max11617";
+ reg = <0x35>;
+ };
+
+ // Fan Board 1 FRU
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+ };
+
+ i2c3mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ i2c3mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ // REAR-IO Board FRU
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+ };
+
+ i2c3mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ status = "okay";
+ };
+
+ pwm@20 {
+ compatible = "max31790";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@2 {
+ reg = <2>;
+ sensor-type = "TACH";
+ };
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
+ };
+
+ hwmon: hwmon@23 {
+ compatible = "nuvoton,nct7363";
+ reg = <0x23>;
+ #pwm-cells = <2>;
+
+ //fan 0 IL
+ fan-0 {
+ pwms = <&hwmon 0 20000>;
+ tach-ch = /bits/ 8 <0x09>;
+ };
+
+ //fan 0 OL
+ fan-1 {
+ pwms = <&hwmon 0 20000>;
+ tach-ch = /bits/ 8 <0x0B>;
+ };
+
+ //fan 1 IL
+ fan-2 {
+ pwms = <&hwmon 4 20000>;
+ tach-ch = /bits/ 8 <0x0A>;
+ };
+
+ //fan 1 OL
+ fan-3 {
+ pwms = <&hwmon 4 20000>;
+ tach-ch = /bits/ 8 <0x0D>;
+ };
+
+ //fan 2 IL
+ fan-4 {
+ pwms = <&hwmon 6 20000>;
+ tach-ch = /bits/ 8 <0x0F>;
+ };
+
+ //fan 2 OL
+ fan-5 {
+ pwms = <&hwmon 6 20000>;
+ tach-ch = /bits/ 8 <0x01>;
+ };
+
+ //fan 3 IL
+ fan-6 {
+ pwms = <&hwmon 10 20000>;
+ tach-ch = /bits/ 8 <0x00>;
+ };
+
+ //fan 3 OL
+ fan-7 {
+ pwms = <&hwmon 10 20000>;
+ tach-ch = /bits/ 8 <0x03>;
+ };
+ };
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+
+ // VR TEMP U399
+ temperature-sensor@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+
+ // VR TEMP U397
+ temperature-sensor@4d {
+ compatible = "ti,tmp75";
+ reg = <0x4d>;
+ };
+
+ // BRICK TEMP U398
+ temperature-sensor@4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+
+ // RMC FRU
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ bus-frequency = <100000>;
+ multi-master;
+ aspeed,hw-timeout-ms = <1000>;
+
+ //USB Debug Connector
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ // SCM TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ gpio@10 {
+ compatible = "nxp,pca9555";
+ reg = <0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "IT_STOP_PUMP_SPARE_2", "IT_STOP_PUMP_2",
+ "IT_STOP_PUMP_SPARE", "IT_STOP_PUMP",
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ power-monitor@14 {
+ compatible = "infineon,xdp710";
+ reg = <0x14>;
+ };
+
+ gpio@19 {
+ compatible = "nxp,pca9555";
+ reg = <0x19>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "wIT_GEAR_RPU_2_LINK_PRSNT_SPARE_N_R", "wIT_GEAR_RPU_2_LINK_PRSNT_N_R",
+ "wIT_GEAR_RPU_LINK_PRSNT_SPARE_N_R", "wIT_GEAR_RPU_LINK_PRSNT_N_R",
+ "", "",
+ "", "";
+ };
+
+ gpio@1a {
+ compatible = "nxp,pca9555";
+ reg = <0x1a>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "wPRSNT_LEAK1_SENSOR_R_PLD_N", "wPRSNT_LEAK0_SENSOR_R_PLD_N",
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "wPRSNT_LEAK2_SENSOR_R_PLD_N";
+ };
+
+ gpio@1b {
+ compatible = "nxp,pca9555";
+ reg = <0x1b>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "", "",
+ "", "",
+ "", "wPRSNT_LEAK4_SENSOR_R_PLD_N",
+ "wPRSNT_LEAK3_SENSOR_R_PLD_N", "",
+ "", "",
+ "", "",
+ "", "",
+ "", "";
+ };
+
+ power-monitor@44 {
+ compatible = "lltc,ltc4286";
+ reg = <0x44>;
+ };
+
+ power-monitor@69 {
+ compatible = "pmbus";
+ reg = <0x69>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+
+ tray_leds_g1_gpio: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g2_gpio: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g3_gpio: gpio@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g4_gpio: gpio@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g5_gpio: gpio@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g6_gpio: gpio@26 {
+ compatible = "nxp,pca9555";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // LED Board FRU
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v10 1/2] dt-bindings: arm:aspeed add Meta Ventura board
2025-08-01 14:11 ` [PATCH v10 1/2] dt-bindings: arm:aspeed add Meta Ventura board P.K. Lee
@ 2025-08-01 14:17 ` Krzysztof Kozlowski
0 siblings, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2025-08-01 14:17 UTC (permalink / raw)
To: P.K. Lee, robh, krzk+dt, conor+dt, joel, andrew, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, patrick
Cc: Jerry.Lin, Jason-Hsu, yang.chen, p.k.lee
On 01/08/2025 16:11, P.K. Lee wrote:
> From: "P.K. Lee" <p.k.lee@quantatw.com>
>
> Document the new compatibles used on Meta Ventura.
>
> Signed-off-by: P.K. Lee <p.k.lee@quantatw.com>
So you just ignored everything I wrote?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v10 0/2] Add Meta (Facebook) Ventura BMC (AST2600)
2025-08-01 14:11 [PATCH v10 0/2] Add Meta (Facebook) Ventura BMC (AST2600) P.K. Lee
2025-08-01 14:11 ` [PATCH v10 1/2] dt-bindings: arm:aspeed add Meta Ventura board P.K. Lee
2025-08-01 14:11 ` [PATCH v10 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC P.K. Lee
@ 2025-08-04 3:09 ` Rob Herring (Arm)
2 siblings, 0 replies; 5+ messages in thread
From: Rob Herring (Arm) @ 2025-08-04 3:09 UTC (permalink / raw)
To: P.K. Lee
Cc: joel, p.k.lee, linux-kernel, Jason-Hsu, linux-aspeed, devicetree,
krzk+dt, conor+dt, yang.chen, Jerry.Lin, patrick,
linux-arm-kernel, andrew
On Fri, 01 Aug 2025 22:11:29 +0800, P.K. Lee wrote:
> Add Linux device tree entry related to Meta (Facebook) Ventura specific
> devices connected to the BMC (AST2600) SoC. The purpose of Ventura is to
> detect liquid leakage from all compute trays, switch trays and rack
> sensors within the rack, log the events, and take necessary actions
> accordingly.
>
> ---
> v1:
> 1. Create ventura dts file.
> 2. Add commit msg.
> 3. Use format-patch to generate patch.
> 4. Add subject prefixes matching the subsystem.
> ---
> v2:
> 1. Modify email content.
> ---
> v3:
> 1. Add mail list.
> ---
> v4:
> 1. Apply git send-email --thread option.
> 2. Sort nodes in the dts alphanumerically.
> ---
> v5:
> 1. Run scripts/checkpatch.pl and fix reported warnings.
> 2. Remove unnecessary 88E6393X CONFIG FRU.
> ---
> v6:
> 1. Add a new stage for the DTS change.
> 2. Run scripts/checkpatch.pl and fix reported error.
> 3. Fix the issue in a separate patch.
> ---
> v7:
> 1. Fix broken indentation in the device tree file.
> 2. Sort nodes alphabetically, then by address if equal.
> 3. Rename fan sensor nodes from 'hwmon' to 'fan-controller'.
> ---
> v8:
> 1. This patch series has significant changes compared to
> previous versions, and quite some time has passed since the last
> submission.Therefore, previously received Acked-by/Reviewed-by/Tested-by
> tags are not included in this version.
> If needed, tags can be added again after review of thisnew version.
> ---
> v9:
> 1. Reordered the node sequence under i2c5.
> 2. Added a description of the platform's intended use to the commit
> messages.
> 3. Added 3 GPIO expanders to i2c10 and defined the necessary GPIO
> line names.
> ---
> v10:
> 1. Added IRQ support in GPIO expanders under i2c10 to handle edge-triggered
> events.
> 2. Reordered the nodes.
> ---
> P.K. Lee (2):
> dt-bindings: arm:aspeed add Meta Ventura board
> ARM: dts: aspeed: ventura: add Meta Ventura BMC
>
> .../bindings/arm/aspeed/aspeed.yaml | 1 +
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../aspeed/aspeed-bmc-facebook-ventura.dts | 1578 +++++++++++++++++
> 3 files changed, 1580 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
>
> --
> 2.43.0
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/next-20250801 (exact match)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250801141131.2238599-1-pkleequanta@gmail.com:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/bus@1e78a000/i2c@200/i2c-mux@77/i2c@5/pwm@20: failed to match any schema with compatible: ['max31790']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: i2c@400 (aspeed,ast2600-i2c-bus): Unevaluated properties are not allowed ('aspeed,hw-timeout-ms' was unexpected)
from schema $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/bus@1e78a000/i2c@580/power-monitor@69: failed to match any schema with compatible: ['pmbus']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dtb: fan@0: aspeed,fan-tach-ch: b'\x00\x01' is not of type 'object', 'integer', 'array', 'boolean', 'null'
from schema $id: http://devicetree.org/schemas/dt-core.yaml#
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2025-08-04 3:14 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-08-01 14:11 [PATCH v10 0/2] Add Meta (Facebook) Ventura BMC (AST2600) P.K. Lee
2025-08-01 14:11 ` [PATCH v10 1/2] dt-bindings: arm:aspeed add Meta Ventura board P.K. Lee
2025-08-01 14:17 ` Krzysztof Kozlowski
2025-08-01 14:11 ` [PATCH v10 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC P.K. Lee
2025-08-04 3:09 ` [PATCH v10 0/2] Add Meta (Facebook) Ventura BMC (AST2600) Rob Herring (Arm)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).