Re: [PATCH v5 4/6] clk: rockchip: Add clock controller support for RV1126 SoC.

From: Heiko Stuebner <heiko@sntech.de>
To: Jagan Teki <jagan@edgeble.ai>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Kever Yang <kever.yang@rock-chips.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-clk@vger.kernel.org,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Finley Xiao <finley.xiao@rock-chips.com>
Subject: Re: [PATCH v5 4/6] clk: rockchip: Add clock controller support for RV1126 SoC.
Date: Sat, 17 Sep 2022 16:25:20 +0200	[thread overview]
Message-ID: <1760564.3VsfAaAtOV@phil> (raw)
In-Reply-To: <CA+VMnFxy5QsoQ=0=qDxhPE=9KxDr_OKSWi9_7tONk0EA12NLFQ@mail.gmail.com>

Hi Jagan,

Am Samstag, 17. September 2022, 13:58:43 CEST schrieben Sie:
> On Sat, 17 Sept 2022 at 12:25, Heiko Stuebner <heiko@sntech.de> wrote:
> >
> > Am Donnerstag, 15. September 2022, 18:39:45 CEST schrieb Jagan Teki:
> > > Clock & Reset Unit (CRU) in RV1126 support clocks for CRU
> > > and CRU_PMU blocks.
> > >
> > > This patch is trying to add minimal Clock-Architecture Diagram's
> > > inferred from [1] authored by Finley Xiao.
> > >
> > > [1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/clk/rockchip/clk-rv1126.c
> > >
> > > Cc: linux-clk@vger.kernel.org
> > > Cc: Michael Turquette <mturquette@baylibre.com>
> > > Cc: Stephen Boyd <sboyd@kernel.org>
> > > Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
> > > Signed-off-by: Jagan Teki <jagan@edgeble.ai>
> > > ---
> > > Changes for v5:
> > > - add platform-drivers
> >
> > [...]
> >
> > > +static void __init rv1126_pmu_clk_init(struct device_node *np)
> > > +{
> > > +     struct rockchip_clk_provider *ctx;
> > > +     void __iomem *reg_base;
> > > +
> > > +     reg_base = of_iomap(np, 0);
> > > +     if (!reg_base) {
> > > +             pr_err("%s: could not map cru pmu region\n", __func__);
> > > +             return;
> > > +     }
> > > +
> > > +     ctx = rockchip_clk_init(np, reg_base, CLKPMU_NR_CLKS);
> > > +     if (IS_ERR(ctx)) {
> > > +             pr_err("%s: rockchip pmu clk init failed\n", __func__);
> > > +             return;
> > > +     }
> > > +
> > > +     rockchip_clk_register_plls(ctx, rv1126_pmu_pll_clks,
> > > +                                ARRAY_SIZE(rv1126_pmu_pll_clks),
> > > +                                RV1126_GRF_SOC_STATUS0);
> > > +
> > > +     rockchip_clk_register_branches(ctx, rv1126_clk_pmu_branches,
> > > +                                    ARRAY_SIZE(rv1126_clk_pmu_branches));
> > > +
> > > +     rockchip_register_softrst(np, 2, reg_base + RV1126_PMU_SOFTRST_CON(0),
> > > +                               ROCKCHIP_SOFTRST_HIWORD_MASK);
> > > +
> > > +     rockchip_clk_of_add_provider(np, ctx);
> > > +}
> > > +
> > > +CLK_OF_DECLARE(rv1126_cru_pmu, "rockchip,rv1126-pmucru", rv1126_pmu_clk_init);
> >
> > this one and the one below should go away I think.
> >
> > Can you check if that is the case, then I can just drop the two
> > CLK_OF_DECLARE lines.
> 
> I think these are unneeded, it worked w/o these when I built a static.

great to hear that, then I'll drop those 

> but others are still included.
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/clk/rockchip/clk-rk3568.c#n1636
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/clk/rockchip/clk-rk3568.c#n1679

very likely. As I want to test such changes on hardware, I'm not
removing them just now but will try to look at that once I'm back
home from LPC/ELCE.

Heiko

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel