[PATCH] ARM: shmobile: lager: Add GPIO LEDs

[laurent.pinchart@ideasonboard.com (Laurent Pinchart)]

Hi Simon,

Thank you for the patch.

On Monday 22 April 2013 12:06:30 Simon Horman wrote:
> The board has 3 LEDs connected to GPIOs. Add a led-gpio device to
> support them.
> 
> Based on "ARM: shmobile: marzen: Add GPIO LEDs" by Laurent Pinchart.
> 
> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>  arch/arm/mach-shmobile/board-lager.c | 37 +++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> Tested on lager board.
> Based on the tag renesas-next-20130419 of my renesas tree.
> 
> diff --git a/arch/arm/mach-shmobile/board-lager.c
> b/arch/arm/mach-shmobile/board-lager.c index 6114edd..a8aa04f 100644
> --- a/arch/arm/mach-shmobile/board-lager.c
> +++ b/arch/arm/mach-shmobile/board-lager.c
> @@ -21,13 +21,49 @@
>  #include <linux/interrupt.h>
>  #include <linux/irqchip.h>
>  #include <linux/kernel.h>
> +#include <linux/leds.h>
>  #include <linux/pinctrl/machine.h>
> +#include <linux/platform_data/gpio-rcar.h>
>  #include <linux/platform_device.h>
>  #include <mach/common.h>
>  #include <mach/r8a7790.h>
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> 
> +/* LEDS */
> +static struct gpio_led lager_leds[] = {
> +	{
> +		.name		= "led8",
> +		.gpio		= RCAR_GP_PIN(5, 17),
> +		.default_state	= LEDS_GPIO_DEFSTATE_ON,
> +	}, {
> +		.name		= "led7",
> +		.gpio		= RCAR_GP_PIN(4, 23),
> +		.default_state	= LEDS_GPIO_DEFSTATE_ON,
> +	}, {
> +		.name		= "led6",
> +		.gpio		= RCAR_GP_PIN(4, 22),
> +		.default_state	= LEDS_GPIO_DEFSTATE_ON,

Just out of curiosity, why is the default state on ?

> +	},
> +};
> +
> +static struct gpio_led_platform_data lager_leds_pdata = {
> +	.leds		= lager_leds,
> +	.num_leds	= ARRAY_SIZE(lager_leds),
> +};
> +
> +static struct platform_device leds_device = {
> +	.name	= "leds-gpio",
> +	.id	= 0,

As there's a single leds-gpio device, maybe id = -1 ?

> +	.dev	= {
> +		.platform_data  = &lager_leds_pdata,
> +	},
> +};
> +
> +static struct platform_device *lager_devices[] __initdata = {
> +	&leds_device,
> +};
> +
>  static const struct pinctrl_map lager_pinctrl_map[] = {
>  	/* SCIF0 (CN19: DEBUG SERIAL0) */
>  	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
> @@ -46,6 +82,7 @@ static void __init lager_add_standard_devices(void)
>  	r8a7790_pinmux_init();
> 
>  	r8a7790_add_standard_devices();
> +	platform_add_devices(lager_devices, ARRAY_SIZE(lager_devices));
>  }
> 
>  static const char *lager_boards_compat_dt[] __initdata = {

-- 
Regards,

Laurent Pinchart